fixed Jettisoning stores

[Aquorys]

Just tested with DCS 2.7.6.13436:

 

Current behavior:

• MASTER ARM switch position has no effect on the selective jettison function
• Selective jettison function jettisons stores, including tanks, immediately when WPN REL is depressed
• GND JETT ENABLE switch has no effect on the selective jettison function
• EMER STORES JETTISON jettisons stores immediately when the button is pressed
• Emergency jettison does not work if MMC or ST STA are not powered (but see comment wrt. various F-16 variants further down in this post)

 

Desired behavior:

• Selective jettisoning of stores (via SMS, S-J, WPN REL or ALT REL) should require MASTER ARM in the ARM position.
• Jettisoning fuel tanks from stations 4 and 6 using selective jettison should require a 1 second hold of the release button.
• If GND JETT ENABLE is in the ENABLE position, all jettison functions should work on the ground / with weight on wheels (selective jettisoning on the ground still requires Master arm in the ARM position)
• Emergency jettisoning of stores (via the EMER STORES JETTISON button) should require a 1 second hold of the button.

 

Note: You may also want to check some more details, depending on which exact variant of the aircraft you are modeling. There are some details that differ, especially for emergency jettisoning, with regards to MMC & ST STA on or off. On some variants, EMER STORES JETTISON will temporarily power the MMC and ST STA / SMS systems to perform the emergency jettison function.

[BIGNEWY]

Master arm is already reported 

ground jettison already reported

Emergency jettison is not available unless the main, standby, or EPU generator is operating also emergency jettison may not be available if an MMC is off or failed. 

 

If you have any evidence about the delay please PM me. 

 

thanks