Leviathan667 Posted August 7, 2022 Share Posted August 7, 2022 Hi, The mission editor does not let us set a frequency to radio pushbuttons A to D. Is it intentional or an omission? Wishlist: Tornado ADV/IDS, Blackburn Buccaneer, Super Mystère B2, Saab J 35 Draken, Link to comment Share on other sites More sharing options...
Machalot Posted August 7, 2022 Share Posted August 7, 2022 Those are the preprogrammed frequencies for airfields. You use them to talk to ATC. On the kneeboard there is a page of airfield codes and radio frequencies. The Base selector dial (the right of the two radio dials on the left panel) should be set to the same number as the last two digits of the airfield; e.g. Kobuleti is 9013, so set Base to 13. The frequencies for ATC at Kobuleti are also listed, and you can select them using the A, B, C1, C2, D preset buttons. If you want to set mission-specific radio channels you should use the Special 1,2,3 and the Group channels (the left selector dial) with the 0 through 9 preset buttons. 3 1 "Subsonic is below Mach 1, supersonic is up to Mach 5. Above Mach 5 is hypersonic. And reentry from space, well, that's like Mach a lot." Link to comment Share on other sites More sharing options...
Leviathan667 Posted August 7, 2022 Author Share Posted August 7, 2022 Thanks Machalot. 1 Wishlist: Tornado ADV/IDS, Blackburn Buccaneer, Super Mystère B2, Saab J 35 Draken, Link to comment Share on other sites More sharing options...
Recommended Posts