Leg2ion Posted March 18, 2023 Posted March 18, 2023 (edited) After some assistance/guidance - setting up a triple monitor display. I have 2 x27" (1920x1080) and 1 x 15.6" (1920x1080) monitors. The width of the 15" is (give or take) the same as the height of the 27" screens, so was thinking of rotating the 15" screen and placing it in the middle to give an uncluttered HUD view, to look like this: However, I either get this (grey area the DCs view) - height set at 1080: Or this - height set at 1920 - which cuts off the options top left and bottom of the right hand menu: I have tried playing with the 3 camera lua, but for the life of me cannot fathom how to set up three independent views - is it actually achievable? Would something like Helios or DisplayMagician help? Edited March 18, 2023 by Leg2ion Formatting AMD Ryzen 5 5600X; ASUS ROG Strix X570-F, Corsair Vengeance 64 GB (2x 32GB) 3600MHz; Seagate FireCuda 510 500GB M.2-2280 (OS); Samsung 860 EVO 2TB M.2-2280 (DCS); MSI GeForce RTX 3090 SUPRIM X 24GB OC GPU. TM Warthog Hotas; T.Flight Pedals; DelanClip/Trackhat.
Scott-S6 Posted March 18, 2023 Posted March 18, 2023 (edited) I'm not sure you can create three separate viewports which is what you'd need to make that work. I'll let someone else comment on that. Assuming you can't, the problem you have is that the center display has a very different pixel density to the other displays and you need to correct that (so change the vertical resolution of the center screen to as close as possible to 1080). Then it will work fine. Edited April 7, 2023 by Scott-S6
Recommended Posts