Bobstar Posted June 6, 2023 Posted June 6, 2023 Hi All, Any ideas why none of my LGB's will come off the rack? Everything is set correctly but, no release. Is this a bug or am I doing something wrong? Thanks in advance.
Ramsay Posted June 6, 2023 Posted June 6, 2023 (edited) 20 hours ago, Bobstar said: Any ideas why none of my LGB's will come off the rack? We really need a short track or video of what you are doing - have you checked out Chuck's AV-8B Guide to see if you've missed anything obvious ? https://chucksguides.com/aircraft/dcs/av-8b/ 20 hours ago, Bobstar said: Is this a bug or am I doing something wrong? You are likely doing something wrong as lasing and dropping GBU-12's was trouble free. Tested using GBU-12's in DCS Open Beta Multi-thread 2.8.5.40170 Edited June 7, 2023 by Ramsay Confirm GBU-12's are working as expected. i9 9900K @4.8GHz, 64GB DDR4, RTX4070 12GB, 1+2TB NVMe, 6+4TB HD, 4+1TB SSD, Winwing Orion 2 F-15EX Throttle + F-16EX Stick, TPR Pedals, TIR5, Win 11 Pro x64, Odyssey G93SC 5120X1440
Spiretail Posted June 7, 2023 Posted June 7, 2023 (edited) On 6/6/2023 at 2:36 PM, Bobstar said: Hi All, Any ideas why none of my LGB's will come off the rack? Everything is set correctly but, no release. Is this a bug or am I doing something wrong? Thanks in advance. My personal checklist for this in no particular order, some of these may not be required but it's what I can think of off the top of my head: Flaps set to CRUS or AUTO Make sure your Nozzles are 100% set to 0 degrees Aircraft speed is above 100 KCAS Master Arm On Fusing is set correctly (anything but SAFE), this is often the problem. Find this on the ASCMI under "FUZ" or press WPN on your UFC, and select "FUZE" on the ODU A/G Master mode selected Correct mode is set up, AUT is the most common, which is CCRP And obviously, pickle button to release the bomb, not trigger. Edited June 8, 2023 by Spiretail Typo, changing "ACMI" to "ASCMI", the Armament Stores Management Control Indicator.
Sarge55 Posted June 9, 2023 Posted June 9, 2023 Also hold the pickle button down for a few seconds. A quick push/release will not work. [sIGPIC][/sIGPIC] i7 10700K OC 5.1GHZ / 500GB SSD & 1TB M:2 & 4TB HDD / MSI Gaming MB / GTX 1080 / 32GB RAM / Win 10 / TrackIR 4 Pro / CH Pedals / TM Warthog
Dustbag1969 Posted January 14, 2024 Posted January 14, 2024 Hi, I have recently returned to the Harrier after several months and I am having the same issue that I just cannot get LGBs to release. Everything seems OK and I get the release que. I hold bomb release for several seconds but nothing happens. It used to work OK for me so I wondered if there had been any changes in the procedure in the last 6 months that I am missing? Thanks for any advice
Recommended Posts