chandawg1 Posted June 29, 2023 Posted June 29, 2023 (edited) This happens on all single-player missions, if I create one, load it into the day flight/instant action or any instant action mission, or any of the training missions. In MP I just can't select the F-15E slot. The error I get in SP is below as well as in the log the attached log. The game doesn't crash so there are no crash logs. 2023-06-24 03:23:17.343 INFO APP (Main): MissionSpawn:spawnLocalPlayer 1,F-15ESE 2023-06-24 03:23:17.383 ERROR EDCORE (Main): Failed to load E:/DCS World OpenBeta/Mods/aircraft/F-15E/bin/F15E_CPT.dll: (1920) The file cannot be accessed by the system. 2023-06-24 03:23:17.434 ERROR WORLDGENERAL (Main): Error: Unit [F-15ESE]: No cell for property records WHEEL_C WHEEL_L WHEEL_R PYLON1 PYLON2. 2023-06-24 03:23:17.434 ERROR APP (Main): Error: Unit [F-15ESE]: Corrupt damage model. I have installed and uninstalled the mod 4 times, I did a fresh install on my SSD, then another fresh install on my other HD as well, same result. Windows 11/AMD Ryzen 7 3700X 8-Core/64 GB 3200MHz DDR4/RTX 3070 8GB dcs.log Edited June 29, 2023 by chandawg1 typos
TomCruise Posted June 29, 2023 Posted June 29, 2023 Did you say it should be controlled by client? Otherwise the game spawns a ki in the plane.
chandawg1 Posted June 29, 2023 Author Posted June 29, 2023 I load the mission (free flight) and then the F10 map comes up and I am unable to control the airplane.
Rainmaker Posted June 30, 2023 Posted June 30, 2023 Sup Chan! you probably already covered this step, but did you wipe the saved games folder too to make sure there were no mods or anything that are conflicting? Outside of that, I’m not much help. Lol.
chandawg1 Posted June 30, 2023 Author Posted June 30, 2023 Hey Rainmaker! Yeah I renamed the saved games folder and let a new one get rebuilt, still had the issue.
Thx1137 Posted June 30, 2023 Posted June 30, 2023 I sometimes have the F10 map come up. But I press F1 and have no trouble controlling the plane. I think it is only when spawning in air so it doesn't happen much, most of the time I spawn cold and dark. Other than that, I've no idea why it happens.
draconus Posted June 30, 2023 Posted June 30, 2023 Check your game shortcut if it runs on admin rights - it shouldn't. Use DCS repair and clean process. Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria
chandawg1 Posted June 30, 2023 Author Posted June 30, 2023 10 hours ago, Thx1137 said: I sometimes have the F10 map come up. But I press F1 and have no trouble controlling the plane. I think it is only when spawning in air so it doesn't happen much, most of the time I spawn cold and dark. Other than that, I've no idea why it happens. That is weird, I have never had the F10 map load, but yeah when I press F1 it doesn't go into the pit 3 hours ago, draconus said: Check your game shortcut if it runs on admin rights - it shouldn't. Use DCS repair and clean process. Thanks for the tip, I would have thought the other way around, I did check though, and have a "fresh" shortcut from the re-install. It has been over a week and I have heard nothing from any RAZBAM or ED developer concerning whether or not this is a bug. Every other module I own runs without issue, so I don't really understand.
draconus Posted June 30, 2023 Posted June 30, 2023 More ideas: RAM checking, scandisk, AV software... There's also support you can contact: https://www.digitalcombatsimulator.com/en/support/ Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria
Thx1137 Posted July 1, 2023 Posted July 1, 2023 11 hours ago, chandawg1 said: That is weird, I have never had the F10 map load, but yeah when I press F1 it doesn't go into the pit Thanks for the tip, I would have thought the other way around, I did check though, and have a "fresh" shortcut from the re-install. It has been over a week and I have heard nothing from any RAZBAM or ED developer concerning whether or not this is a bug. Every other module I own runs without issue, so I don't really understand. I'd check your F1 Pilot View keybind in the F15 settings to make sure it isn't bound to an "always down" button. That is about the only thing I can think off. I don't think Razbam reply here much but if you go to their discord there is always someone there, after all, that is their support location. Whether they can tell you anything is another question. I expect most of them are seriously busy at the moment.
Thx1137 Posted July 1, 2023 Posted July 1, 2023 Heh, I took my own advice and I found I had a key I forgot about that toggles between the map and the pilot view. So that was my issue.
Solution chandawg1 Posted July 1, 2023 Author Solution Posted July 1, 2023 I created a local administrator profile on my Windows install and now am able to fly the F-15E module. I will likely delete my existing profile and re-install it. 1
Rainmaker Posted July 1, 2023 Posted July 1, 2023 Damn that Bill Gates….. Glad you found some kind of way around that.
PotentiallyDodgy Posted September 12, 2023 Posted September 12, 2023 I'm getting the same issue, 2023-06-24 03:23:17.383 ERROR EDCORE (Main): Failed to load E:/DCS World OpenBeta/Mods/aircraft/F-15E/bin/F15E_CPT.dll: (1920) The file cannot be accessed by the system., tried local administrator profile, folder security settings, antivirus, etc, no luck, any help is appreciated. non-steam log.log
draconus Posted September 12, 2023 Posted September 12, 2023 22 minutes ago, PotentiallyDodgy said: I'm getting the same issue, 2023-06-24 03:23:17.383 ERROR EDCORE (Main): Failed to load E:/DCS World OpenBeta/Mods/aircraft/F-15E/bin/F15E_CPT.dll: (1920) The file cannot be accessed by the system., tried local administrator profile, folder security settings, antivirus, etc, no luck, any help is appreciated. Use DCS repair (full/slow) and clean process first. What did you try with AV? Disabling or excluding DCS folders from scanning? Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria
PotentiallyDodgy Posted September 12, 2023 Posted September 12, 2023 (edited) I've already tried verifying files on steam multiple times, switched to the non steam version and transferred licenses and repaired that too, issue persisted, what i did to antivirus was just adding exclusions on dcs folders and at one point disabling windows defender/malwarebytes, ive tried local administrator and game reinstall/dlc reinstall as well and nothing worked. the game DLL is definitely there i checked the folder, what do you mean by clean process? Edited September 12, 2023 by PotentiallyDodgy
draconus Posted September 12, 2023 Posted September 12, 2023 18 minutes ago, PotentiallyDodgy said: what do you mean by clean process? In standalone: .\DCS_updater.exe cleanup https://www.digitalcombatsimulator.com/en/support/faq/repair/#2463807 Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria
PotentiallyDodgy Posted September 12, 2023 Posted September 12, 2023 Did a cleanup and slow repair and still no change sadly
draconus Posted September 12, 2023 Posted September 12, 2023 12 minutes ago, PotentiallyDodgy said: Did a cleanup and slow repair and still no change sadly Try to contact support then: https://www.digitalcombatsimulator.com/en/support/ Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria
PotentiallyDodgy Posted September 12, 2023 Posted September 12, 2023 I already contacted support and they couldn't identify the problem either lol, absolutely no idea what could be causing it its so confusing.
draconus Posted September 12, 2023 Posted September 12, 2023 I'd suggest full disk and memory scan if it isn't file access rights problem. Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria
PotentiallyDodgy Posted September 13, 2023 Posted September 13, 2023 Did both scans and no errors were found, I may try re-buying the module in case its a license issue or something, all i can think of atm.
draconus Posted September 13, 2023 Posted September 13, 2023 (edited) 2 minutes ago, PotentiallyDodgy said: I may try re-buying the module in case its a license issue That does not make sense. If it installs it has the license. You can remove and install it again (the module). As a last resort I'd reinstall Windows. Edited September 13, 2023 by draconus Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 F-14A/B F-15E CA SC NTTR PG Syria
PotentiallyDodgy Posted September 13, 2023 Posted September 13, 2023 Ok, i'll try that then assuming another reinstall doesnt work, ill also go back through the stuff i tried before.
Recommended Posts