solved Hp Reverb G2 Rev.1 jerking and extreme image distortion when looking out to the sides in low flight

[Uruber]

Hello everyone,

Since the MT update, I have had the problem that when I look to the sides on the ground or in low-level flight, the picture is jerky and extremely distorted.

I've really tried a lot but nothing helped except that I have to set the resolution to 50% in OXR to be able to play it very smoothly.

But that's not a solution either, because otherwise I can hardly read anything and it worked before at 100% resolution.

In addition, I upgraded my computer because of this problem and the problem still exists.

I'm at the end of my Latin and don't know what to do anymore. Maybe one of you has a solution.

My system:

Intel I9 13900K
64 GB RAM 6000mhz
GIGABYTE RTX 4090 GAMING OC
M2 SSD Samsung 980 Pro 1TB Windows
M2 SSD Samsung 980 Pro 1TB DCS
M2 SSD Samsung 980 Pro 2 TB Games
M2 SSD Samsung 970 EVO 512 GB Sonstiges

ROG STRIX Z790-F Gaming WiFi Mainboard

DxDiag2.txt dcs.log

[The_Nephilim]

it showed in the log file your shortcut:

 

"G:\DCS World OpenBeta\bin-mt\DCS.exe" --force_enable_VR

 

Are you using OpenXR? it should also state this:

 

--force_OpenXR

 

 

Also what mods do you use? have you tried cleaning your FXO, Metashaders folder?

Edited September 3, 2023 by The_Nephilim

[Nedum]

Hi,

 

couldn't find your DCS system settings. Those settings are the most important ones.

If you are not able to reach 90 FPS every ms, or your time frames are always beneath 10 ms, you will always see stutter if you move your VR-Head.

You have to use Multi Reporjection (MR). You can enable it within the OpenXR Tools. Bewegungsreproduktion auf 1/2 setzen. Das wird schon Sascha.

 

Schöne Grüße

 

 

[Uruber]

vor 6 Stunden schrieb The_Nephilim:

it showed in the log file your shortcut:

 

"G:\DCS World OpenBeta\bin-mt\DCS.exe" --force_enable_VR

 

Are you using OpenXR? it should also state this:

 

--force_OpenXR

 

 

Also what mods do you use? have you tried cleaning your FXO, Metashaders folder?

 

Hello,

yes openxr is active, no idea why it wasn't in there

I deleted all the mods but no change.

I have already cleaned the FXO and Metashader folders, unfortunately no change either.

vor 5 Stunden schrieb Nedum:

Hi,

 

couldn't find your DCS system settings. Those settings are the most important ones.

If you are not able to reach 90 FPS every ms, or your time frames are always beneath 10 ms, you will always see stutter if you move your VR-Head.

You have to use Multi Reporjection (MR). You can enable it within the OpenXR Tools. Bewegungsreproduktion auf 1/2 setzen. Das wird schon Sascha.

 

Schöne Grüße

 

 

Yes, I see now that I forgot them   thanks for that

my FPS is always between 55 and 90 so I don't understand the problem.

Multi Reporjection? is it the same as motion reproduction right?

when I turn on motion reproduction, I always get strange artifacts, e.g. with the F-18 in the right MFD, as if the image is moving.

I always find that very annoying but if I can't solve the problem in any other way, unfortunately that's the only option I have.

in settings msaa on 2x or completely bring what brings but only very minimal. Unfortunately, shade off doesn't do anything either

But when I go to the default Vr it runs buttery smooth. no wonder, everything is on almost minimal

 

[Nedum]

Hi,

 

I meant Motion Reprojection. It was too early in the morning.

Thank you for the screens. With those settings, I would be happily surprised if you wouldn't run into VR-problems, especially without MR.

I show you my settings. Motion Reprojection is disabled in the OpenXR Tools, but I am using the OpenXR Toolkit and set MR there (on and 45 FPS), but you can set it in the OpenXR Tools, if you want. I use it too for the sharpening (FSR = 100%).

Your settings are a way too high. Water is an FPS and frame time killer. The same for 4 times MSAA, especially in VR. If one want to use shadows, only one shadow setting should be higher than "flat". If both settings are higher than flat, it will give you a big FPS hit.

Clouds set to Ultra is a No-No for VR too.

Your F18 Screen issue is strange. Never happened to me. Do you use any kind of Mod?

 

What you never should do:

Do not use the same feature settings in different tools at the same time.

 

What you should always do if you run into issues:

 

 1. disable !!all Mods!!

2. do a slow repair

3. delete the fxo and metashaders2 folder

nullnull

null

 

 

 

 

Edited September 3, 2023 by Nedum

[Glide]

Visibility Range is a big factor.  Try your settings with Visib Range Low.  Here are my very smooth settings.

Headset Best Visual Quality, Maximum Resolution, 60hz.

Edited September 3, 2023 by Glide

[Uruber]

Thank you for your help. I'll test it tomorrow.

[Uruber]

Thank you for your help,

with a mix of both attitudes, it's gotten a lot better now. 

[MIghtymoo]

On 9/3/2023 at 11:03 AM, Uruber said:

Hello,

yes openxr is active, no idea why it wasn't in there

I deleted all the mods but no change.

I have already cleaned the FXO and Metashader folders, unfortunately no change either.

Yes, I see now that I forgot them   thanks for that

my FPS is always between 55 and 90 so I don't understand the problem.

Multi Reporjection? is it the same as motion reproduction right?

when I turn on motion reproduction, I always get strange artifacts, e.g. with the F-18 in the right MFD, as if the image is moving.

I always find that very annoying but if I can't solve the problem in any other way, unfortunately that's the only option I have.

in settings msaa on 2x or completely bring what brings but only very minimal. Unfortunately, shade off doesn't do anything either

But when I go to the default Vr it runs buttery smooth. no wonder, everything is on almost minimal

 

You need a CERN quantum computer CPU coupled with an exotic alien tech GPU to run those DCS settings on 90 fps.

You may try this fresh guide on Youtube: 

 

Edited September 9, 2023 by MIghtymoo