DarthTater Posted January 5 Posted January 5 7 minutes ago, slughead said: Can you show me the contents of: Saved Games\DCS\Scripts\dcs2target Saved Games\DCS\Scripts\Hooks Saved Games\DCS\Scripts
slughead Posted January 5 Author Posted January 5 You have installed the source code zip files rather than the dcs2target.zip and TMHotasLEDSync.zip. You must remove the "-main" folders as they are not part of the toolset. You only need to install the files contained within dcs2target.zip and TMHotasLEDSync.zip per the instructions on the GitHub pages for each file: https://github.com/iknowkungfutoo/DCS2Target?tab=readme-ov-file#installation https://github.com/iknowkungfutoo/TMHotasLEDSync#installation Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
DarthTater Posted January 5 Posted January 5 1 hour ago, slughead said: You have installed the source code zip files rather than the dcs2target.zip and TMHotasLEDSync.zip. You must remove the "-main" folders as they are not part of the toolset. You only need to install the files contained within dcs2target.zip and TMHotasLEDSync.zip per the instructions on the GitHub pages for each file: https://github.com/iknowkungfutoo/DCS2Target?tab=readme-ov-file#installation https://github.com/iknowkungfutoo/TMHotasLEDSync#installation How does this look @slughead
slughead Posted January 5 Author Posted January 5 Almost. You have all the .tmh and .tmc files left over in the hooks folder from your previous installation. They can stay there although it isn't an appropriate place for them. You should place those in a folder of their own that isn't part of DCS, e.g. C:\Users\Darren\TargetScripts\THHotasLEDSync\ dcs2target.lua must remain in the Hooks folder. All the best, Slughead Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
DarthTater Posted January 5 Posted January 5 10 minutes ago, slughead said: Almost. You have all the .tmh and .tmc files left over in the hooks folder from your previous installation. They can stay there although it isn't an appropriate place for them. You should place those in a folder of their own that isn't part of DCS, e.g. C:\Users\Darren\TargetScripts\THHotasLEDSync\ dcs2target.lua must remain in the Hooks folder. All the best, Slughead Thanks @slughead I'll make some further tweaks to file location. Just did another test flight and all worked great with one small issue - the airbrake indicator - only the left-hand bank of LEDs illuminated. Airbrake.MOV
slughead Posted January 5 Author Posted January 5 (edited) Excellent. We got there in the end. 2 minutes ago, DarthTater said: only the left-hand bank of LEDs illuminated That's intentional. The other column has been left spare for future development. Edited January 5 by slughead Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
DarthTater Posted January 5 Posted January 5 5 minutes ago, slughead said: Excellent. We got there in the end. That's intentional. The other column has been left spare for future development. Perfect one other tinnnnnyyyy thing…. The Threat Warning Aux button (top right) isn’t illuminating:
slughead Posted January 5 Author Posted January 5 2 minutes ago, DarthTater said: Perfect one other tinnnnnyyyy thing…. The Threat Warning Aux button (top right) isn’t illuminating: I draw your attention to the third paragraph of the first post of this thread Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
DarthTater Posted January 5 Posted January 5 10 minutes ago, slughead said: I draw your attention to the third paragraph of the first post of this thread Ah. Thanks for pointing me to that mate. Can I just say a massive thank you to you for not only creating the scripts and instructions to support this on the Viper TQS but also for being super responsive in this thread. Truly appreciated - absolute credit to the community!!
slughead Posted January 5 Author Posted January 5 Just now, DarthTater said: Ah. Thanks for pointing me to that mate. Can I just say a massive thank you to you for not only creating the scripts and instructions to support this on the Viper TQS but also for being super responsive in this thread. Truly appreciated - absolute credit to the community!! Thanks, and you're very welcome. Enjoy! 1 Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
Magic Man Posted January 9 Posted January 9 Do you know of any way to control the LEDs from SPAD.neXt?
slughead Posted January 13 Author Posted January 13 On 1/9/2025 at 11:23 PM, Magic Man said: Do you know of any way to control the LEDs from SPAD.neXt? I’ve never heard of that. Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
cptmrcalm Posted January 18 Posted January 18 (edited) Done a step by step tutorial to get the LEDs working. I've credited you and tigershark. Should help promote your work! Really great stuff. Do you have any further plans for the 2nd column? (for the F16) https://youtu.be/9nKPVTAYC7U?si=uZDqA7VGpX78xalB Edited January 18 by cptmrcalm https://www.youtube.com/@cptmrcalm | https://www.instagram.com/cptmrcalm/ | https://twitter.com/cptmrcalm | https://www.tiktok.com/@cptmrcalm
slughead Posted January 18 Author Posted January 18 9 hours ago, cptmrcalm said: Done a step by step tutorial to get the LEDs working. I've credited you and tigershark. Should help promote your work! Really great stuff. Do you have any further plans for the 2nd column? (for the F16) https://youtu.be/9nKPVTAYC7U?si=uZDqA7VGpX78xalB Nice! Thanks. Some of us are natural presenters… some not (me). Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
slughead Posted January 18 Author Posted January 18 9 hours ago, cptmrcalm said: Done a step by step tutorial to get the LEDs working. I've credited you and tigershark. Should help promote your work! Really great stuff. Do you have any further plans for the 2nd column? (for the F16) https://youtu.be/9nKPVTAYC7U?si=uZDqA7VGpX78xalB In your video you mentioned trying the other files such as A10. You should not try this and if you do, it won’t work anyway. These files are used automatically by the main script depending on which aircraft you decide to fly in DCS. Please stick to the instructions. Please consider updating your video accordingly or you’re likely to cause me to engage in unnecessary support requests using up the little spare time that I have. Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
cptmrcalm Posted January 20 Posted January 20 (edited) rgr. I'll update the description and post a comment. Done reddit and youtube comments and descriptions. "Hi all. The author of the mod has informed me that for now - ONLY USE the file I use in the video: "TMHotasLEDSync.tmc." for the F-16C. The MOD is a WIP. So stay tuned for updates. Keep an eye out for them on the GitHub pages." Edited January 20 by cptmrcalm 1 https://www.youtube.com/@cptmrcalm | https://www.instagram.com/cptmrcalm/ | https://twitter.com/cptmrcalm | https://www.tiktok.com/@cptmrcalm
cptmrcalm Posted January 20 Posted January 20 Also, I recommend you do the same to your original post. Especially the section: Supported Aircraft: The following aircraft are currently supported: A little note under it. *NOTE. Might help you. https://www.youtube.com/@cptmrcalm | https://www.instagram.com/cptmrcalm/ | https://twitter.com/cptmrcalm | https://www.tiktok.com/@cptmrcalm
GarrettJMorgan Posted January 31 Posted January 31 Followed the directions but still having issues with getting the lights to show up anybody have any advice?
slughead Posted January 31 Author Posted January 31 (edited) 43 minutes ago, GarrettJMorgan said: Followed the directions but still having issues with getting the lights to show up anybody have any advice? Can’t offer any advice without information as per the Need Help section of the first post in this thread. Edited January 31 by slughead Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
GarrettJMorgan Posted January 31 Posted January 31 2 hours ago, slughead said: Can’t offer any advice without information as per the Need Help section of the first post in this thread. Sorry I missed that I'm currently running the Target Software Version 3.0.24.618 and I think it's failing even before the DCS Launch when I try to run the script the log is getting this for the script editor. The lights on the pack will be on prior to the start of the script but once I hit run it turns off and this happens. Running script: F:\Program FIles\Eagle Dynamics\Thrustmaster Scripts\TMHotasLEDSync.tmc Mapped plugin module "C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll" Compile Succeeded. TMHotasLEDSync v1.0.4 Physical USB HID devices managed by script! Currently plugged USB HID devices[2]: 1: "Joystick - HOTAS Warthog" - "USB\VID_044F&PID_0402&REV_0100" 2: "Viper TQS" - "USB\VID_044F&PID_0412&REV_0200" USB HID device with hardware id "VID_044F&PID_0404" cannot be found Installing filter driver to VID_044F&PID_0412. Please Wait...Script stopped! Done! Error:(internal) cannot associate a filter with the selected USB HID device "VID_044F&PID_0412" Runtime Error: STOP request received while running main on line 63 in "F:\Program FIles\Eagle Dynamics\Thrustmaster Scripts\TMHotasLEDSync.tmc" Error:Script run timed out!
slughead Posted January 31 Author Posted January 31 5 hours ago, GarrettJMorgan said: Sorry I missed that I'm currently running the Target Software Version 3.0.24.618 and I think it's failing even before the DCS Launch when I try to run the script the log is getting this for the script editor. The lights on the pack will be on prior to the start of the script but once I hit run it turns off and this happens. Running script: F:\Program FIles\Eagle Dynamics\Thrustmaster Scripts\TMHotasLEDSync.tmc Mapped plugin module "C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll" Compile Succeeded. TMHotasLEDSync v1.0.4 Physical USB HID devices managed by script! Currently plugged USB HID devices[2]: 1: "Joystick - HOTAS Warthog" - "USB\VID_044F&PID_0402&REV_0100" 2: "Viper TQS" - "USB\VID_044F&PID_0412&REV_0200" USB HID device with hardware id "VID_044F&PID_0404" cannot be found Installing filter driver to VID_044F&PID_0412. Please Wait...Script stopped! Done! Error:(internal) cannot associate a filter with the selected USB HID device "VID_044F&PID_0412" Runtime Error: STOP request received while running main on line 63 in "F:\Program FIles\Eagle Dynamics\Thrustmaster Scripts\TMHotasLEDSync.tmc" Error:Script run timed out! Here is the solution: Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
GarrettJMorgan Posted January 31 Posted January 31 4 hours ago, slughead said: Here is the solution: Followed the steps in the reddit thread but still having the same repeat issues the only one I didn't see from the thread though was VID_044F&PID_B679. Unless I'm getting the instructions wrong. Anymore advice will be helpful if not at least all the buttons work I'll just be missing the LEDs.XD
slughead Posted January 31 Author Posted January 31 1 hour ago, GarrettJMorgan said: Followed the steps in the reddit thread but still having the same repeat issues the only one I didn't see from the thread though was VID_044F&PID_B679. Unless I'm getting the instructions wrong. Anymore advice will be helpful if not at least all the buttons work I'll just be missing the LEDs.XD It's worked for others on this thread. Maybe you missed something. Either way, this is a Thrustmaster/Windows problem. You will need to raise this with Thrustmaster for further support. You'll probably have the same problem with a Thrustmaster-supplied script. Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
GarrettJMorgan Posted February 1 Posted February 1 5 hours ago, slughead said: It's worked for others on this thread. Maybe you missed something. Either way, this is a Thrustmaster/Windows problem. You will need to raise this with Thrustmaster for further support. You'll probably have the same problem with a Thrustmaster-supplied script. I pretty much removed and retried everything and tried doing one of the things of leaving everything unplugged and then starting the script and that seems to at least get the script running and I see it actuating when I use the speed brakes or the handle but the lights don't actuate not sure if this is still thrustmaster windows but just figured I'd try and at least put this here incase someone has my same issue. Running script: F:\Program FIles\Eagle Dynamics\Thrustmaster Scripts\TMHotasLEDSync.tmc *** Allocated ProcInstances found from the previous run: use FreeProcInstance() *** Compile Succeeded. Mapped plugin module "C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll" TMHotasLEDSync v1.0.4 Physical USB HID devices managed by script! Currently plugged USB HID devices[0]: No USB HID devices - device "VID_044F&PID_0404" cannot be found No USB HID devices - device "VID_044F&PID_0412" cannot be found No USB HID devices - device "VID_044F&PID_0413" cannot be found No USB HID devices - device "VID_044F&PID_0416" cannot be found No USB HID devices - device "VID_044F&PID_0417" cannot be found No USB HID devices - device "VID_044F&PID_0415" cannot be found No USB HID devices - device "VID_044F&PID_0414" cannot be found Virtual HID devices managed by script! Connecting virtual joystick...Done Device name set to Thrustmaster Combined Connecting virtual keyboard...Done Connecting virtual mouse (absolute axes)...Done Server socket listening on TCP port 2323 main returned 0 vDCS2TARGET v1.0.7 : 18 bytes received DCS2TARGET v1.0.7 mF-16C_50 : 9 bytes received F-16C_50 u11100000000 : 12 bytes received u11100000001 : 12 bytes received u11100000002 : 12 bytes received u11100000003 : 12 bytes received u11100000004 : 12 bytes received u11100000005 : 12 bytes received u11100000004 : 12 bytes received u11100000003 : 12 bytes received u11100000002 : 12 bytes received u11100010112 : 12 bytes received u11100010111 : 12 bytes received u11100010110 : 12 bytes received q : 1 bytes received dcs.log
slughead Posted February 1 Author Posted February 1 (edited) Right. You’ve fixed the first problem. It now looks like you’re using an old version of the scripts as you shouldn’t be seeing the lines with 12 bytes received. Please check you are using the files from my github pages. Edited February 1 by slughead Slugmouse: a finger-mounted mouse button emulator for hand-tracked VR cockpit clicking. Available now! Slugmouse Demonstration Video
Recommended Posts