Jump to content

Harpoon R/BOL mode issue


Go to solution Solved by Sylosis,

Recommended Posts

Posted

First time I try the R/BOL mode and I must be doing something wrong. I set everything in the stores page (FLT, TERM, SEEK). Used the surface radar in SEA mode to lock a submarine. Maybe my lock was not directly spot on (difficult to get a perfect lock as the radar refreshes), but it was still almost on it.

Mission I was flying needed me to report visual before attacking. So I had to get close, reported it and then flew away to around 10 nm. Turned around, made sure my radar lock was OK and shot.

The Harpoon didn't fly at all towards my target. It seemed to be flying towards the waypoint I had active at the time.

What did I do wrong?

Windows 10-64bits, i7-8700k, GTX 1080Ti, 32 Gb RAM, MSI Monitor 32in 165Hz.

 

Mirage 2000C, F5-E, Mig21bis, A10-C, FC3, F-18, AV-8B N/A, F-14, F-16, SuperCarrier

  • Solution
Posted
2 hours ago, Tholozor said:

Are you talking about R/BL or BOL? Those are two completely different modes.

Sorry, R/BL, not BOL.

3 hours ago, rob10 said:

Post a track or we're mostly guessing what you did wrong.

Didn't save correctly (like it almost always does), hence why I tried to describe every step of what I did

 

I think I wasn't doing a full lock with the A/G Radar. I wasn't pressing SSS towards the radar a second time to make a full lock.

Windows 10-64bits, i7-8700k, GTX 1080Ti, 32 Gb RAM, MSI Monitor 32in 165Hz.

 

Mirage 2000C, F5-E, Mig21bis, A10-C, FC3, F-18, AV-8B N/A, F-14, F-16, SuperCarrier

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...