Cannot map 'Thrust' to any axis in some modules

[RogueRunner]

See 

 

 

Noticed this first on the F16, same is happening with my Mirage F1, the F18 works. 

[Slippa]

Since ‘carnage update’ was installed I found lots of bindings for things weren’t working.

The Spitfire throttle was first. When I checked the bindings there was a red exclamation mark in the column. I cleared it and re-assigned it but it persisted. I posted a thread in a panic to fix it. Someone suggested clearing it, restarting DCS then re-assigning it and that worked. At least for that one.

I have loads to go through if I’m gonna fix whatever I find later but I might wait for a fix? I’d lost collective in a chopper too so it seems to be all over the place.

Try clearing it and restarting.

good luck with it.

[RogueRunner]

13 modules of mine was affected

[Slippa]

I feel for ya. Not funny is it. I've still got a few to fix but hopefully I'm through the worst.

a PITA and time consuming doing it the long way round like I did. Back to actually flying something soon.

[LancerVI]

Same problem. Controls borked on several modules with red exclamation. Trying to track down what's wrong is a real nightmare. 

[JimmyWA]

Same problem. I still cannot fly the Kiowa properly since the update. The controls don't react correctly after clearing and reassigning. I even went into the Special controls and tried adjusting the throttle setting there. No difference. I also had to reassign the axis controls for the P51 (I only checked a few of my modules). I will try the clear, restart and then reassign for the Kiowa tonight. What a mess!

[Rainer_B.]

Had the Problem with the Kiowa and the Collective. A IT Crowd Solution  was working (Have you tried turn it off and on again?). I miss the Betas.

[Major Corvus]

I'm Having this same issue

[rob10]

11 hours ago, JimmyWA said:

Same problem. I still cannot fly the Kiowa properly since the update. The controls don't react correctly after clearing and reassigning. I even went into the Special controls and tried adjusting the throttle setting there. No difference. I also had to reassign the axis controls for the P51 (I only checked a few of my modules). I will try the clear, restart and then reassign for the Kiowa tonight. What a mess!

Have you tried RIGHT CLICKING in the appropriate binding box and manually picking what you want to assign it to (rather than moving the control to pick the assignment)?

[MAXsenna]

Same problem. I still cannot fly the Kiowa properly since the update. The controls don't react correctly after clearing and reassigning. I even went into the Special controls and tried adjusting the throttle setting there. No difference. I also had to reassign the axis controls for the P51 (I only checked a few of my modules). I will try the clear, restart and then reassign for the Kiowa tonight. What a mess!

Did FFB turn itself on in the general settings by chance? This update did change quite a lot of my settings.

Sent from my SM-A536B using Tapatalk

[Esac_mirmidon]

Guys just read the post quoted as solution.

Clear any assignment on every box for every column that has the red exclamation.

Restart DCS

Bind again the axis.