Some weird behavior

[Swson]

It’s a pity that such a nice module being fully abandoned….in last DCS update I noticed  always the instability of the pilot left arm and relative throttle, also the altimeter seems sometimes living its own life…the Normandy map is impossible to resize when launched the free flight mission in it….we pay for this module we can expect that either Razbam or DCS being involved in maintening it !!! Or refund the customers.

Edited September 9, 2024 by Swson

[Galinette]

Could you provide some details about the throttle and the altimeter issues?

[Swson]

1- activate the pilot body in the cockpit

2- use your HOTAS throttle control to make slight adjustment to power

3- the vitual pilot arm moves with the virtual throttle like if it had a Parkinson illness then it stabilizes but could as well move alone during the flight with impact on power

4- randomly, the altimeter needle jump from several hundredth of feet up or down then return to the good value Radar altimeter activated or not it’s the same

however this is very random and occurs not too often

5- starting a instant free flight from Normandy map I was unable to zoom in/out on the map which was possible with on other module or on another map with the 2000

[Galinette]

3> This definitely looks like a controller problem. Maybe hardware (which throttle do you have?) or related to some detent settings.
4> This looks like the trans-sonic effect modeled on the altimeter. Try passing mach 1 looking at the altimeter and tell us if this is what you have seen before. If yes that's a feature
5> This absolutely looks like a core DCS problem, even if occurring only with one aircraft type. Ask main DCS bugs forum for this.

Edited September 11, 2024 by Kercheiz

[Swson]

thanks for answer

3 - all controllers are working fine with all mods except M2000 throttle which  is warthog but I’ll check a possible conflict dedicated to this mod I have added a wwPO2 and a Virpil Apache collective lately, I don’t remember if the problem occurred after or before….anyway it’s true DCS creates often axis garbages when a new control is added….

4- I will check but I made hundredth  of M2000 flights and never noticed this behaviour before…

5- yes I think so I need to investigate on that and make a ticket

for now I’m in .lua developments to limit the aircraft crashes on missile hit, ground sea or CVN effects on my 6DOF platform so I’ll come back later on these M2000 problems…

By the way did you noticed same behaviour on this mod with your setup?

[Gladius]

3 - I also had this problem. Even without a pilot's body.
It works without any problems with all other modules

[MAXsenna]

On 9/16/2024 at 10:38 AM, Swson said:

3 - all controllers are working fine with all mods except M2000 throttle which  is warthog

Double check you've set the throttle as a sliderin axis tuning. 

Edited October 24, 2024 by MAXsenna

[Gladius]

Am 24.10.2024 um 17:32 schrieb MAXsenna:

Double check you've set the throttle as a sliderin axis tuning. 

You're right. I have the Warthog Throttle, and somehow both axes of the throttle are suddenly configured and they interfere with each other.
I was able to reproject the error and fix it that way.
It's working fine for me now.