dimanizer Posted July 30, 2024 Posted July 30, 2024 Hi, 2 of the 3 SAM go up okay. I'm able to destroy one and W32 gets the second. The third SAM located near the one that gets destroyed by W32 never goes active though, and so can't be targeted with the HARM. I did try with POS PB/EOM mode, but it never makes it there. As a result 20 point lost from score . Cool mission though!
mattj96 Posted July 30, 2024 Posted July 30, 2024 Same issue, mission was able to be completed but the score was dismal.
baltic_dragon Posted July 31, 2024 Posted July 31, 2024 Hey, I checked the triggers and everything is set up as it should - and it used to work. I can't do anything about it on my end, looks like core DCS thing... For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Ostach Posted September 4, 2024 Posted September 4, 2024 I can confirm, third SA-6 never went up. Only two were visible on the HAD. I shacked one, W32 got another one, my second HARM went into the already destroyed one.
baltic_dragon Posted September 6, 2024 Posted September 6, 2024 Thanks. I'll have another look at it and see if I can replicate / fix this issue. Will keep you posted. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
baltic_dragon Posted September 6, 2024 Posted September 6, 2024 @Ostach @mattj96 @dimanizer thank you guys, you were right. There was a wrong trigger set, fixed for next update. Appreciate the report! 3 For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
dimanizer Posted October 3, 2024 Author Posted October 3, 2024 Ran the mission tonight after updating. All SAMs come on as they should, but upon landing and finishing the mission, the briefing does not update and the score doesn't indicate success - 60 even though I hit both SAMs and voices-overs played indicating success. The mission success/end badge did show up after entering the hanger.
AlessandroFuBu Posted October 6, 2024 Posted October 6, 2024 Hello, great campaign. I have finished it and it was awesome. I did mission n. 9 twice and I had a problem with scoring in both times even if I killed all the sam and landed. - first time after I killed all the 3 sa6 I went for refueling (why not during night...) but after disconnected with the tanker the mission was kind of going back at the beginning with all the communications like "I am on station; sa11 active, mig 29, fence in..." and my buddy after refueling went back on "garden". I tryed to land but with no communication and even if I went in the hangar the mission of course wasn't complete and the points were just 50 so I skipped it finished the campaign... - second time killed againg all 3 sa6 NO refueling... all the comm were ok I landend, I got the mission success logo BUT the score was 60 ... what did I do wrong? In both mission all 3 sa6 went active and I killed all of them (I got the 2 south and wingman the north one) I checked with my tgp just to be sure In both missions all the strikes hit all the targets and I got "honey jar" message
baltic_dragon Posted October 8, 2024 Posted October 8, 2024 thanks. Will check For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Solution baltic_dragon Posted October 8, 2024 Solution Posted October 8, 2024 Thanks, I have this issue reported for checking! 1 For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
epolta Posted October 10, 2024 Posted October 10, 2024 Flew this mission tonight and confirmed all 3 SA-6s killed (confirmed in TGP)with three harms fired (wingman fired 2 and I fired 1). So mathematically I must have hit mine, but yet in debrief said I missed my SA-6. Don’t have tacview running to see exactly what happened but it sounds like might be a bug?
baltic_dragon Posted October 28, 2024 Posted October 28, 2024 @dimanizer took me some time but I found the issue - should be fine. 1 For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
baltic_dragon Posted October 28, 2024 Posted October 28, 2024 On 10/10/2024 at 4:12 AM, epolta said: Flew this mission tonight and confirmed all 3 SA-6s killed (confirmed in TGP)with three harms fired (wingman fired 2 and I fired 1). So mathematically I must have hit mine, but yet in debrief said I missed my SA-6. Don’t have tacview running to see exactly what happened but it sounds like might be a bug? Just fixed this. Merging this thread with another one. 1 For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
dimanizer Posted November 2, 2024 Author Posted November 2, 2024 @baltic_dragon was the fix not part of the recent update? I just flew it and same story.
baltic_dragon Posted November 4, 2024 Posted November 4, 2024 Honestly, I am not sure if it made it there or there was another issue with the scoring. I'll have to double check. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
pbt31 Posted January 1 Posted January 1 The problem for me is that Weasel 32 doesn't attack or fire missiles. I did destroy the 2 SA6s with my 2 harms, but that's about it. I'd had all 3 active, though. And now, at the debriefing, it's said that I missed one of my shots...
baltic_dragon Posted January 5 Posted January 5 @pbt31 Weasel 32 not doing their tasks is a bug and it is likely caused by some unofficial mods or other 3rd party stuff that interferes with the AI somehow (don't ask me why). We tested the mission and it worked fine for me and two of my beta-testers who know it inside-out... Please follow the steps below just in case: The No.1 Rule with DCS Campaigns... If you have ANY mod that is NOT purchased from the DCS Store, it will probably cause issues. SRS and OpenKneeboard(Mostly VR users) seem to be ok, as we test these mission using both. Make sure to remove any and all mods before flying campaigns. (Check out OVGME, I use it daily and it works well) If you have no mods, or if removing all mods still does not fix the issue, take the following steps(Test after each step): 1) Delete fxo and metashaders folders in you saved games. Can get gummed up with old files. 2) Rename you DCS Saved Games folder, run DCS and let it create a new one. Close DCS and then just copy the Config folder from the old to the new so you don't lose your bindings at least. (Some mods can write to places like your scripts folder in your saved games location as an example. Also seems to help sometimes even if you never run mods at all) 3) Do a full deep repair of DCS to clear up any unwanted stuff in your main game folder. Some settings to check: 1) If you have easy comms enabled, disable it. 2) Under Gameplay otions, make sure the tick box on the bottom right for "No force from mission, use min" is NOT ticked. 3) Try disabling TacView under special options. It can cause issues, usually performance, but that can lead to bugs if your cores are overloaded/too busy and it misses a trigger point due to that. A side note, some mods can write to places like your scripts folder in your saved games location (as an example). If removing all mods still does not fix the issue, take the following steps: 1)Delete fxo and metashaders folders in you saved games. Can get ummed up with old files. 2) Rename you DCS Saved Games folder, run DCS and let it create a new one. Then just copy the Config folder from the old to the new so you don't lose your bindings at least. 3) Do a full deep repair of DCS to clear up any unwanted stuff in your main game folder. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Recommended Posts