Requesting consistent keybinds, left/right mouse clicks etc. mouse wheel, mouse drag

[Fresh]

Hi there,

please have a look at the keybindings, at the moment it is very inconsistent: some switches toggle irrespective if I click left or right mouse button. Even some three way switches toggle through the three states with any mouse click. Also some dials I can mouse drag them (e.g. when setting the altimeter) and that works fine in 2D and in VR (I have mouse disabled in VR, and use my head movements as a mouse controller), however other dials, like the lighting don't work with click and drag in VR when using head movement. To summarise my wish:

1. All switches that go down, should be left click

2. All switches that go up, should be right click.

3. Rotary switches, like the fuel tank selector: left-click should turn it anti-clockwise, right-click should turn it clockwise.

4. All dials, like altimeter setting and lighting should be able to click and drag in VR with mouse disabled

5. All dials as in point 4 should also work using mouse scroll wheel

6. Include keybinds for all switches, please include a bind for each state, and a bind for toggling a state. E.g. there is no keybind to show/hide the pilot body. Please also make gear and hook as toggle buttons as well. I think something like the master arm only has one possible state at the moment. Many hardware users need ON/ELSE or OFF/ELSE type key binds as well. (Look at the Hornet for example, the "special" cases).

Thanks in advance!

Fresh

[ChuckyChuck]

+1

[Kreutzberg]

I agree completely! We have a similar topic over in "bugs" as well:

 

[gulredrel]

+1

[PL_Harpoon]

Also, all dials should be also manipulated by the mouse wheel.

[ssn]

+1

Also, sorry for hijacking, but I feel this'll get some attention -- I'd add two small requests:

• gear handle binding: next (cycles: down -> up -> dive brake) & prev (cycles: dive brake -> up -> down); also absolute: up, down, dive brake
• canopy: next (cycles: closed -> 1st notch -> 2nd notch -> open) & prev (cycles: closed -> 2nd notch -> 1st notch -> closed)

[Slippa]

Yep, clicking left or right was confusing me until I sussed they’ll work whatever.

toggles, sliders, rotaries, all o that. 

[MAXsenna]

This should be mandatory in EVERY module. Can't believe ED doesn't enforce this on new modules.

Sent from my SM-A536B using Tapatalk

[Madman1]

I want to rebind the camera zoom (default is mouse wheel) to my VKB STECS thumb wheel axis but the option is greyed out in the "General" category and it DOES NOT EXIST AT ALL in the SU-25T category. I don't want to have to take my hands off the throttle and stick every dam time I want to change my view. This is very frustrating.

I would have started a new post on this but apparently this forum is programed to give a big middle finger to new members.

[MAXsenna]

I want to rebind the camera zoom (default is mouse wheel) to my VKB STECS thumb wheel axis but the option is greyed out in the "General" category and it DOES NOT EXIST AT ALL in the SU-25T category. I don't want to have to take my hands off the throttle and stick every dam time I want to change my view. This is very frustrating.
I would have started a new post on this but apparently this forum is programed to give a big middle finger to new members.

That's strange! I have no issues with zooming with my Warthog, so I'm not sure why you can't find it in the axis settings.

Cheers!

Sent from my SM-A536B using Tapatalk

[Madman1]

Yes you can do it with the Warthog but not the SU-25. Sorry if that wasn't clear.

[MAXsenna]

Yes you can do it with the Warthog but not the SU-25. Sorry if that wasn't clear.

Apologies! Didn't pay attention. You should make a report in the Su-25 thread.

Sent from my SM-A536B using Tapatalk

[Fresh]

It would be great if someone from Magnitude would write a comment here if they plan to make changes or not.. hint hint..

[-Rudel-]

Hi, we'll look into this 🛠