provide functional short track in caucasus ADI & Hud Display not functioning/responding in MP manual startup

[Jazz]

Hi,

I have this very strange issue on MP only when doing manual start where the 29 for whatever reason will bug out and my ADI and Hud Display wont function correctly and will act as if the ADI is caged and the HUD symbology is static. Unsure if im doing something wrong but I've tried the same procedure on startup in quick mission on SP and worked fine. 

This only seems to be an Issue after the latest patch.

Any help is appreciated, thanks.

Track file attached. 

SPS-Contention-Syria-SARH-20250925-212047.trk

Edited September 25 by Jazz

[BIGNEWY]

Hi, 

please check Wags video are you sure you are not missing a step? 

Timestamped 

 

[Rhayvn]

Jazz, check the options in the mission editor.  Under additional options for the group, ensure you don't have the INS simplified.  If you have that set, you can not align the INS normally on a MP cold start and the HSI will be locked to North.

Edited September 25 by Rhayvn

[Jazz]

1 hour ago, BIGNEWY said:

Hi, 

please check Wags video are you sure you are not missing a step? 

Timestamped 

 

I always do J+9 for 15 seconds so not sure 

26 minutes ago, Rhayvn said:

Jazz, check the options in the mission editor.  Under additional options for the group, ensure you don't have the INS simplified.  If you have that set, you can not align the INS normally on a MP cold start and the HSI will be locked to North.

I will check this thanks

[Jazz]

INS settings look normal 

[Rhayvn]

That's the only scenario I have experienced so far that breaks it.  

[Jazz]

Something I've noticed is the gyro cage button is illuminated in red on manual start even 5mins+ after starting and completing the startup sequence. I pressed it in flight and it did nothing but then a minute later it all came alive... very strange 

[Dača]

On 9/26/2025 at 8:16 AM, Jazz said:

Something I've noticed is the gyro cage button is illuminated in red on manual start even 5mins+ after starting and completing the startup sequence. I pressed it in flight and it did nothing but then a minute later it all came alive... very strange 

Have you been switching main gyro power switch off on electric panel ? To test if stand by gyro holds heading?