Jump to content

DCS Crashes at "Waiting for pooled tasks - 1" Every time, reguardless of Aircraft/Map/Mission


Recommended Posts

Posted

Good Afternoon,

Like the title says, my game crashes at this step regardless of what aircraft, mission, server, etc I'm using. I'm able to get into the game and use the mission editor, but trying to actually start anything results in this outcome. Attached is my crash log.

This is on a brand-new (clean formatted) and fully updated windows 11 install with a brand new DCS install. The only module I have currently enabled outside of the default free ones, is the hornet. 

I have ran memtest and verified that my RAM is fully functional. I'm on the Latest BIOS drivers and NVIDIA drivers. Page file is system manged. Both the Saved Games, and the main DCS folders are exceptions in windows defender. This computer with the same hardware, used to work flawlessly a few months back. 

 

Please let me know if you need more information. 

dcs.log-20251016-205211.zip

Posted

Looks like an authorization issue, check that your computer date, time and time zone are correct, and that you are using the correct dcs account password.

 

For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra

For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar

Mobile: iPad Pro 12.9" of 256 GB

Posted
50 minutes ago, sabreman said:

I've done that, and have the same result. Attached is the new crash log.


not the same result, the authorization error is gone and there is a new error:

 

EDCORE (15212): # C0000005 ACCESS_VIOLATION at 00007ff837d8eff3 00:00000000

 

your windows has a very small swapfile, try your increase it to at least 32 GB, here is a guide if needed:

 

https://www.windows-tweaks.info/en/guide/set-swap-file-in-windows-10-11/

 

 

 

 

For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra

For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar

Mobile: iPad Pro 12.9" of 256 GB

Posted (edited)

Error is the same as the one in the first log you provided:

2025-10-16 21:59:45.510 INFO    EDCORE (15212): DCS/2.9.20.15384 (x86_64; MT; Windows NT 10.0.26200)
2025-10-16 21:59:45.511 INFO    EDCORE (15212): C:\Games\DCS World\bin\edterrain4.dll
2025-10-16 21:59:45.512 INFO    EDCORE (15212): # C0000005 ACCESS_VIOLATION at 00007ff837d8eff3 00:00000000
2025-10-16 21:59:45.513 INFO    EDCORE (15212): SymInit: Symbol-SearchPath: 'C:\Games\DCS World\bin;', symOptions: 532, UserName: 'YOOB'
2025-10-16 21:59:45.516 INFO    EDCORE (15212): OS-Version: 10.0.26200 () 0x100-0x1
2025-10-16 21:59:45.517 INFO    EDCORE (15212): 0x00000000002deff3 (edterrain4): assets::lLinked::save + 0xEE53
2025-10-16 21:59:45.518 INFO    EDCORE (15212): 0x00000000002d564b (edterrain4): assets::lLinked::save + 0x54AB
2025-10-16 21:59:45.519 INFO    EDCORE (15212): 0x0000000000276e86 (edterrain4): landscape5::Surface5File::verticalIntersection + 0x6DD6
2025-10-16 21:59:45.519 INFO    EDCORE (15212): 0x0000000000274844 (edterrain4): landscape5::Surface5File::verticalIntersection + 0x4794
2025-10-16 21:59:45.519 INFO    EDCORE (15212): 0x000000000027106a (edterrain4): landscape5::Surface5File::verticalIntersection + 0xFBA
2025-10-16 21:59:45.520 INFO    EDCORE (15212): 0x00000000002710a1 (edterrain4): landscape5::Surface5File::verticalIntersection + 0xFF1
2025-10-16 21:59:45.521 WARNING LOG (15180): 6 duplicate message(s) skipped.
2025-10-16 21:59:45.521 INFO    EDCORE (15212): 0x0000000000275b07 (edterrain4): landscape5::Surface5File::verticalIntersection + 0x5A57
2025-10-16 21:59:45.521 INFO    EDCORE (15212): 0x00000000002729c3 (edterrain4): landscape5::Surface5File::verticalIntersection + 0x2913
2025-10-16 21:59:45.522 INFO    EDCORE (15212): 0x0000000000277f9f (edterrain4): landscape5::Surface5File::querySceneObjectsTris + 0x87F
2025-10-16 21:59:45.522 INFO    EDCORE (15212): 0x00000000002716c9 (edterrain4): landscape5::Surface5File::verticalIntersection + 0x1619
2025-10-16 21:59:45.522 INFO    EDCORE (15212): 0x000000000027758d (edterrain4): landscape5::Surface5File::queryRuntimeSceneObjects + 0x10D
2025-10-16 21:59:45.523 INFO    EDCORE (15212): 0x00000000000e4f18 (edterrainGraphics41): createInstancerRenderable + 0x353A8
2025-10-16 21:59:45.523 INFO    EDCORE (15212): 0x00000000000e4291 (edterrainGraphics41): createInstancerRenderable + 0x34721
2025-10-16 21:59:45.523 INFO    EDCORE (15212): 0x0000000000034959 (edCore): ed::SyncTaskQueue::push_task + 0x489
2025-10-16 21:59:45.524 INFO    EDCORE (15212): 0x00000000000493d6 (edCore): ed::SyncTaskQueue::push_task + 0x14F06
2025-10-16 21:59:45.524 INFO    EDCORE (15212): 0x00000000000331e1 (edCore): ed::thread::_get_current_thread_id + 0x71
2025-10-16 21:59:45.525 INFO    EDCORE (15212): 0x00000000000037b0 (ucrtbase): wcsrchr + 0x150
2025-10-16 21:59:45.527 INFO    EDCORE (15212): 0x000000000002e8d7 (KERNEL32): BaseThreadInitThunk + 0x17
2025-10-16 21:59:45.769 INFO    EDCORE (15212): Minidump created.

Your page file is fine, you have 64Gb RAM.

Based on the DCS log analyzer, and yes I realise this is a new install but things can get corrupted, it has the following advice:

  • Run a slow repair, including the option to remove files
  • Delete Saved Games\DCS\fxo and metashaders2 and try again.
  • Next, delete %LOCALAPPDATA%\TEMP\DCS and try again.
  • Next, try renaming Saved Games\DCS to DCS.old and try again. Make sure to rename and not delete so you can get your bindings back from the Config\Input folder

The DxDiag report also shows some issues:

Windows Error Reporting (WER)

Application Errors

DCS.exe: c0000005 (edterrain4.dll)

Memory Timing Issues

Remove any overclocking (XMP) from your RAM.

Try the above and then provide another log file.

 

EDIT:

I see you're on Windows 25H2. Was your previous install on this as well? Haven't seen any reports of issues with this as yet (there's a forum thread here with people stating theirs is fine so far), but something to be mindful if folk see similar issues / stack traces.

Edited by sleighzy
  • Like 1

AMD 7800x3D, 4080Super, 64Gb DDR5 RAM, 4Tb NVMe M.2, Quest 2

Posted (edited)

Any ideas? I've been unable to play DCS for a few weeks now because of this issue. 

 

Edit: Out of desperation I've un-installed the hornet and reset all my settings to the lowest possible, and the game loaded! I got like 4 frames of gameplay before it crashed again. Note, this was the first frogfoot instant action mission, which I've tried before. 

However, this is definitely progress and the new crash log is attached. Seems to be the same terrain engine error as before. I'll keep editing this post as i keep troubleshooting. 

dcs.log-20251018-174927.zip

Edited by sabreman
Posted

Have you tried RENAMING your DCS Saved Games folder (re-install won't have touched it).  You've got some weird errors showing up in it (even in the latest log) that could be causing issues.

Posted

I've reinstalled my whole OS friend, which included a full drive wipe, and yes I have ALSO tried renaming the folder. 

As a follow up to my last post, it seems that the crash is now somewhat random. The same mission now crashes on lodaing world assets or whatever. Seems like a race-condition of some kind. 

Posted
On 10/16/2025 at 10:59 AM, sabreman said:

I'm on the Latest BIOS drivers

This computer with the same hardware, used to work flawlessly a few months back. 

Please let me know if you need more information

Did you update BIOS before these issues started?

Posted

No. These issues started on my previous install with outdated BIOS drivers. I hadn't fired up DCS for like, 2-3 months and when I tried this whole shtick kicked off. I thought a complete wipe would solve it, but here we are.  Quite the problem.

Posted

Just as a troubleshooting idea, and because I have literally no idea what else to try, I made a brand new DCS account and tried the game with it (and everything but the base free modules removed). Same outcome, no dice. 

Posted (edited)

Latest log contains the following during startup. You had a similar one around vc_options.lua in the first log. I'm looking through the others.

2025-10-18 17:48:00.843 ERROR   EDCORE (Main): [C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua] CreateFile(REWRITE): The system cannot find the path specified.
2025-10-18 17:48:00.843 ERROR   EDCORE (Main): Can't open file 'C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua' from real path fs.
2025-10-18 17:48:00.843 ERROR   LuaGUI (Main): Cannot save disabled devices into file[C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua]! Error can't open "C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua" for 'w'
2025-10-18 17:48:32.516 ERROR   EDCORE (Main): [C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua] CreateFile(REWRITE): The system cannot find the path specified.
2025-10-18 17:48:32.516 ERROR   EDCORE (Main): Can't open file 'C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua' from real path fs.
2025-10-18 17:48:32.516 ERROR   LuaGUI (Main): Cannot save disabled devices into file[C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua]! Error can't open "C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua" for 'w'
2025-10-18 17:49:02.539 ERROR   EDCORE (Main): [C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua] CreateFile(REWRITE): The system cannot find the path specified.
2025-10-18 17:49:02.539 ERROR   EDCORE (Main): Can't open file 'C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua' from real path fs.
2025-10-18 17:49:02.539 ERROR   LuaGUI (Main): Cannot save disabled devices into file[C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua]! Error can't open "C:\Users\YOOB\Saved Games\DCS\Config/Input/disabled.lua" for 'w'

Can you check if that file actually exists. It does for me so don't know if it's a permissions problem. You don't run DCS, and have never run DCS, as an administrator right? Never even ticked the box "Run as administrator" under the Compatibility tab of your properties on the shortcut or exe file in the bin folder?

Edited by sleighzy
  • Like 1

AMD 7800x3D, 4080Super, 64Gb DDR5 RAM, 4Tb NVMe M.2, Quest 2

  • Recently Browsing   1 member

×
×
  • Create New...