Shaddowdog Posted November 11, 2011 Posted November 11, 2011 Problem with activating engine throttle levers in the cold start mission. Keyboard Page up and Page down commands have no affect and the mouse cursor does not change to green when positioned over the throttles. Any thoughts on this would be greatly appreciated. Thanks
kylania Posted November 11, 2011 Posted November 11, 2011 They aren't clickable in game. Make sure sure they are mapped properly. Options -> Controls -> Aircraft (Ka-50 Sim) -> Ins Engines start-up control panel and levers Then at the bottom make sure Throttle down (Idle-Medium-Auto-Full) is mapped to PageDown and Throttle up (Idle-Medium-Auto-Full) is mapped to PageUp. [sIGPIC][/sIGPIC] Christmas Cheer - A Landing Practice Mission : Beta Paint Schemes : HOTAS Keyboard Map : Bingo Fuel - A DCS A-10C Movie
lucaguccione Posted November 11, 2011 Posted November 11, 2011 Did you imported your control profile from previous BS1?
Shaddowdog Posted November 11, 2011 Author Posted November 11, 2011 (edited) No, I have a new clean install of BS2 using the HOTAS Warthog profile. Key profile is correct in controls. Edited November 11, 2011 by Shaddowdog
bengo Posted November 11, 2011 Posted November 11, 2011 Might you be mistaken the throttles for the engine cut-off valves, you know the levers opposite the throttles, with the red handles on them ? i7 6700k/GTX1070-8G/MSI-Z170A Gaming Pro Carbon/32GB DDR4 Kingston HyperX PREDATOR DDR4 3000MHZ Vengeance 1600/TM Warthog #6106/Samsung SB350_S27B350H/OCZ Agility3 SSD 128GB / Win10-64/TIR5
Shaddowdog Posted November 11, 2011 Author Posted November 11, 2011 No mistaking the throttles for the engine cut-off valves which do work fine in the sim. But still having problems with no throttle control. Changed to another keyboard with no effect. Everything else seems to work as it should so far.
Ninjaofdoom Posted November 11, 2011 Posted November 11, 2011 Did you imported your control profile from previous BS1? Is there a step by step on this? I had this exact same problem, and all the axis for my X52 and pedals are borked on BS2. I searched for the lua (i think it was?) and couldnt find anything. I'd love to copy over a file and have it work again, as i've been unable to get it to work since I bought BS2 :( Someday we'll look back on all this and plow into a parked car. i7-930 @ 3.8ghz, 6GB Corsair Dominator 1600, EVGA GTX470, OCZ 60GB SSD, TrackIR 5 Pro, Win7 64 And a 46" LCD at 1920x1080 to enjoy the goodness :joystick: :pilotfly:
Shaddowdog Posted November 14, 2011 Author Posted November 14, 2011 Hey Guys, I was able to successfully link the throttles to my HOTAS Warthog throttle slider and they work fine with that. But no response as far as the keyboard.
RedX Posted November 14, 2011 Posted November 14, 2011 I don't know if this is related, but I'll mention it here anyways... I had problems when I tried to reassign the throttle keys. After assigning them, the keyfile had wrong numbers in the up= .. and down=.. lines for throttle control. Replaced the numbers with those from the original keyboard file using Notepad++ and it worked (sorry I don't have the correct numbers here right now). So if you've made changes in the key assignments it is maybe worth checking the nyumbers for throttle control in the key file in My Games folder (Win 7). Also make sure that no other software or drivers is interrupting your keypresses. Intel Core i7 9700K@4.6GHz|ASUS Strix Z390-H|G.Skill DDR4 32GB@3200MHz|MSI GeForce RTX 2080 Ti|2xSSD 500GB Samsung 970 EVO M.2 RAID0|SSD Samsung 850 EVO|Corsair HX 750W|Fractal Design Define R6 Blackout|UWQHD 34"|Valve Index|Logitech G9|MS Natural Ergonomic Keyboard 4000|VPC WarBRD Base+MongoosT-50CM2 Grip|VPC MongoosT-50 Throttle|VKB T-Rudder|Beyerdynamic DT770|Boom mic|Windows 10 Home
tobyeez Posted December 5, 2011 Posted December 5, 2011 Hi I have the G940 and also cannot get throttle levers to work in BS2 upgrade. I know they used to work. Help.
CptTangerine Posted February 22, 2012 Posted February 22, 2012 I have the same problem. I have just upgraded. I tried BS1 up and they work fine in that but in BS2 whatever I do, nothing. I have tried mapping the controls to different keys and also to buttons on my joystick and neither one is working. It's very frustrating. CPU: Intel Core i5 4590 3.3GHz, RAM: 32GB HyperX Fury 1600MHz DDR3, GFX: EVGA GTX 1080, OS: Windows 7 Home Premium SP1, Joy: TM Warthog, Peds: CH Pro Pedals, TrackIR3, VR: Vive
AlphaOneSix Posted February 22, 2012 Posted February 22, 2012 Hi I have the G940 and also cannot get throttle levers to work in BS2 upgrade. I know they used to work. Help. If Page Up and Page Down don't work, check your keyboard mapping.
CptTangerine Posted February 23, 2012 Posted February 23, 2012 I have also just found that the trim key / joystick button doesn't work either. CPU: Intel Core i5 4590 3.3GHz, RAM: 32GB HyperX Fury 1600MHz DDR3, GFX: EVGA GTX 1080, OS: Windows 7 Home Premium SP1, Joy: TM Warthog, Peds: CH Pro Pedals, TrackIR3, VR: Vive
Spetz Posted February 23, 2012 Posted February 23, 2012 I remapped all my engine level / throttle levers to my numpad on the kboard. Works great,,maybe give that a try. As for inporting your old BS1 profiles to BS2..don't...They will not work. I had to reinstall the sim to sort it all out the first time I did it.
Recommended Posts