Help with eyefinity setup and DCS A-10C

[JAG]

Hi guys, today I had the opportunity to test the famous eyefinity with 3 monitors each one with a resolution of 1366x768. All the setup process in the catalyst control panel was fine, but when checked the screen resolution I get 4080x768 and my guess was it should be 4098x768, but it's ok, 18 pixels less is no big deal.

 

In the sim, I configure the resolution to 4080x768 and aspect ratio to 5.3125 and monitors to 1. Run a quick mission and the cockpit looks to close, so I tried to zoom out it, and it just zoom out a little bit and that's all. Then I tried a basic configuration with a resolution of 1366x768, aspect ratio 1.7786 and monitor to 1, and with that config I was able to zoom out a lot.

 

 

 

 

 

Then tried in DCS P-51 and with the resolution of 4080x768 and aspect ratio to 5.3125 and monitors to 1 and it happens the same, the mission starts with the cockpit too close.

 

That's how it works or I'm missing something in the configuration, and by the way the video cards used are two ATI HD 5770 running in crossfire.

 

 

Somebody could help me please, thanks in advance. :helpsmilie:

[PeterP]

The different resolution read out is caused because you must have adjusted/applied bezel compensation.

Please check your CCC again - and you will see that when you have a grouped display - and change the bezel compensation you will also change the overall res. - something you have always to keep in mind when setting up additional exports.

 

To get all other things working like opening the FOV and and many more is explained here:

 

Fix for misplaced/stretched MP and Mission Gui - also for BS

[JAG]

Hallo PeterP

 

Thank you very much for your help, with the info in the link I finally solve the problem with the cockpit zoom and the menus, now everything works fine.

 

Curiously DCS World runs smoother than DCS A-10C, maybe they improved the graphics engine, and if thats the case, then I hope it gets even better with the final release.

 

 

Again Thanks a lot you are very kind :thumbup:

[Mr_Burns]

*****Bump****

 

Has something changed with the snap views, the old file formats in these files dont seem to match the current files?