tacannav Posted July 19, 2013 Posted July 19, 2013 My communication menu only works when I land the chopper, once I take off it does not work, I tried reprograming the joystick with a different letter to no avail, anyone familiar with a problem like this?
tacannav Posted July 19, 2013 Author Posted July 19, 2013 the chopper in the above thread is DCS BlackShark2
TimeKilla Posted July 19, 2013 Posted July 19, 2013 Get this to have to use ctrl and the key in air and it resets your place in the menu. :joystick: YouTube :pilotfly: TimeKilla on Flight Sims over at YouTube.
-MadCat- Posted July 19, 2013 Posted July 19, 2013 You actually have to use the Radio in the helicopter instead of the little "cheat" comms menu on the ground. Bind the "SPU-9 PTT" command in the options to your joystick and work the helicopter's radio properly. Enable power to the radios you want to use (Intercom, VHF-2) on the forward lower wall panel, set correct frequency for VHF-2 on the left panel, and set the radio distribution selector to the correct channel on the left panel. All should work as it should. Greetings MadCat Link -> Stateful button commands for many DCS modules
tacannav Posted July 19, 2013 Author Posted July 19, 2013 know what radio frequency for comm menu is?
Davis0079 Posted July 19, 2013 Posted July 19, 2013 try the search function....this has been discussed since 1.23.....the comms button has changed....ralt\ is the new command....you can change it back to just \, so you dont have to use a modifier key every time you wish to make a call search function for the win It only takes two things to fly, Airspeed and Money.
-MadCat- Posted July 19, 2013 Posted July 19, 2013 Whoever you want to talk to :D Check Flight Manual page 520 "Airdrome data" for reference on frequencies. Link -> Stateful button commands for many DCS modules
tacannav Posted July 19, 2013 Author Posted July 19, 2013 The RALT\ took care of the problem, just upgraded from BS to BS2, still learning the commands, thanks.
Recommended Posts