beynesairforce Posted September 6, 2013 Posted September 6, 2013 (edited) Found a bug last night with 2 other pilot after the update. We are making adjustment on the TACAN to put in place the correct channel (ILS training). Left rotary is working very well with mouse scroll. We found a "bug" with the right rotary: - Mouse Right clic switch form X to Y or Y to X (OK no pb) - Mouse scroll change the unit digit (OK no pb) But if we make a mistake by doing a mouse left clic, the rotary become crazy, and after we are not able to made a mouse scroll (rotary is moving but unit digit are not changing)..... Someone else can confirm ? Edited September 6, 2013 by beynesairforce [sIGPIC][/sIGPIC] Intel I7-960 / 12Gb Corsair DDR3 Ram / Asus GTX980 Ti Strix / Asus PB287Q / TIR 5+Clip Pro Logitech G13/ TM Warthog N°01295 / Saitek Combat Rudder Pedals / Win Seven 64bits/ TM Cougar MFDs (Vers. 1) / 1 Syncmaster 206BW running Helios
Nate--IRL-- Posted September 8, 2013 Posted September 8, 2013 Seems ok in my test version, can't seem to replicate in 1.2.6 either - anybody have a short track? Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
mmairitsch Posted September 8, 2013 Posted September 8, 2013 (edited) Hi Nate! Find the track attached. The problem occures when you left-click and drag the rotary up/down.BUG - Tacan Rotary Knobs fail.trk Edited September 8, 2013 by mmairitsch
Nate--IRL-- Posted September 8, 2013 Posted September 8, 2013 (edited) Thanks I see it now. Happens for Both Knobs too. Nate Edited September 8, 2013 by Nate--IRL-- Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
mmairitsch Posted September 8, 2013 Posted September 8, 2013 Hi Nate! Yes, for both knobs. Sorry, didn't mention it earlier. THX
Sharpe_95 Posted September 9, 2013 Posted September 9, 2013 If it doesn't already apply I would like to report this for 126. In my case the X Y seems ok but no other dials are working at all in any way. I can hear clicking but can't see any input/channel change. Is this still open for 126 or should I make a new thread? -Sharpe
alexbap Posted September 11, 2013 Posted September 11, 2013 Same here. Windows 7 Professional x64, EVGA GTX 1060 6GB, Intel Xeon W5650(i7) @ 4.1ghz, Asus P6TWS motherboard, 24gb DDR3, 500GB SSD. Hybrid joystick(Base: Saitek X55 - Grip:CH Fighterstick), Saitek X55 throttle, Saitek ruder pedals.
Nate--IRL-- Posted September 11, 2013 Posted September 11, 2013 If it doesn't already apply I would like to report this for 126. In my case the X Y seems ok but no other dials are working at all in any way. I can hear clicking but can't see any input/channel change. Is this still open for 126 or should I make a new thread? -Sharpe This a new problem, please try deleting your input settings in the C:\users folder Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
Zapper35 Posted September 11, 2013 Posted September 11, 2013 This a new problem, please try deleting your input settings in the C:\users folder Nate Hi Nate, I am having a similar problem with UHF Front. Just to be sure: C:\Users\..DCS\Config\Input\DCS\A-10C\Keyboard.lua Cheers, Zap
Nate--IRL-- Posted September 11, 2013 Posted September 11, 2013 Ideally rename temporarily C:\Users\Ste x64\Saved Games\DCS\Config\Input\A-10C to C:\Users\Ste x64\Saved Games\DCS\Config\Input\A-10CBAK And see if it still occurs - it may also be a cockpit-wide problem in that Click drag is broken for everything. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
Zapper35 Posted September 11, 2013 Posted September 11, 2013 Ideally rename temporarily C:\Users\Ste x64\Saved Games\DCS\Config\Input\A-10C to C:\Users\Ste x64\Saved Games\DCS\Config\Input\A-10CBAK And see if it still occurs - it may also be a cockpit-wide problem in that Click drag is broken for everything. Nate Hi Nate, Did as you suggest but no joy. Same fault. O I checked the directory specified and it has not created a new C\....\A-10C directory. Should it have? Ta, Zap
Nate--IRL-- Posted September 11, 2013 Posted September 11, 2013 Hi Nate, Did as you suggest but no joy. Same fault. O I checked the directory specified and it has not created a new C\....\A-10C directory. Should it have? Ta, Zap Yes - you must close out of DCS completely then renter it - however, my advice was mainly directed for Sharpe_95's problem not yours. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
Zapper35 Posted September 11, 2013 Posted September 11, 2013 Yes - you must close out of DCS completely then renter it - however, my advice was mainly directed for Sharpe_95's problem not yours. Nate Hmm, will look into it further. I also have Helios on the 4th screen and the problem exists in there as well. Will investigate further and advise. Thanks for your help mate, Zap
Doughboy Posted September 22, 2013 Posted September 22, 2013 I'm having the same issue..... Go Ugly Early! [sIGPIC][/sIGPIC]
towsim Posted September 22, 2013 Posted September 22, 2013 Check the ILS dials. Seems to be the same problem. After an accidental left click, they are not controlable anymore. [sIGPIC][/sIGPIC]
VFA-151_Animal Posted September 24, 2013 Posted September 24, 2013 Same here. Left TACAN knob works, right does not. Neither ILS knobs work.
VFA-151_Animal Posted September 24, 2013 Posted September 24, 2013 Disregard last post. Mine works with mouse wheel. Was using left click. Thanks
_Lion_ Posted September 30, 2013 Posted September 30, 2013 Hi Nate! Me too. The problem occures when I left-click and drag the rotary up/down. I changed User\...\Saved Game\DCS\Config\Input\A10C to A10CBak but doesn't work. What I need to do? [sIGPIC][/sIGPIC] 132virtualwing.org
Nate--IRL-- Posted September 30, 2013 Posted September 30, 2013 You need to wait for a patch that fixes it I'm afraid. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
_Lion_ Posted September 30, 2013 Posted September 30, 2013 Thanks Nate, I will wait! :( [sIGPIC][/sIGPIC] 132virtualwing.org
howie87 Posted October 1, 2013 Posted October 1, 2013 Yeah, I came across the same issue last night. The second digit froze up and would not move (I'm not using Helios). Once this, the track IR screen tear issue and the radios are fixed I'll be happy! It's a shame there were two issues in 1.2.5 (ILS/TACAN Morse code not audible and yaw SAS, EAC incorrect) and 3 game breaking issues in 1.2.6.
SNAFU Posted October 1, 2013 Posted October 1, 2013 I can confrim TACAN dail knob issues too. Sometimes the right one is ok, the left isnt, sometimes other way around. Is that anyhow related to the Radio frequency dial bug? [sIGPIC][/sIGPIC] Unsere Facebook-Seite
Recommended Posts