Pilot sight reticle

[peter]

Still cant get it to turn on. Wh:helpsmilie:at am I missing. I found the intensity knob and turned it both ways, nothing. Is there a power switch that I am forgetting?

[cichlidfan]

All pertinent commands/functions:

 

Just for reference, here are the new commands for the pilot sight.

 

 

It should be noted that the keyboard command for On/Off in v1.2.5 is now the command for Armed/Docked in v1.2.6

Edited October 23, 2013 by cichlidfan

[lorenzoj]

Yes there is a separate power on/off switch too....... behind the sight. You can activate it with the mouse without being able to see it once you know where it is located

[Lizzard]

http://forums.eagle.ru/showthread.php?t=114651

 

Problems 1 and 3

[peter]

Nope. I've still got nothing that looks like a reticle. I can pull the sight down via mouse click and change elevation and spin the intensity knob but a reticle never appears. Tried RCTRL+m, tried RSHFT+M, tried RCTRL+RSHFT+0, tried RCTRL+RSHFT+0(zero). Nothing brings up a pilot reticle.

[LiveBait]

Do you have your inverter on?

[peter]

Ok, here's the deal. Whatever is screwed up with the key bindings, there is a little dammed switch ON THE REAR of the pilots sight that is the switch for the reticle itself. Turn it on prior to pulling the sight down or from the gunners seat and it works. You can also see the switch tool tip from the pilot seat if you look at the lower left corner of the range/elevation reference card,(mouse turns green). Problem solved, thank you everyone. And yes LiveBait, Inverter was on.

[Fifi]

All pertinent commands/functions:

 

 

 

It should be noted that the keyboard command for On/Off in v1.2.5 is now the command for Armed/Docked in v1.2.6

 

What's the interest to get those new commands?

I still have old ones because i didn't delete my input profile for Huey before updating, but i don't see why changing...old commands are working fine!

[Flagrum]

What's the interest to get those new commands?

I still have old ones because i didn't delete my input profile for Huey before updating, but i don't see why changing...old commands are working fine!

The point is that there are also new keyboard commands and the changes were necessary to make the whole setup more, erm, logical (or so :o)

[jay43]

Ok, here's the deal. Whatever is screwed up with the key bindings, there is a little dammed switch ON THE REAR of the pilots sight that is the switch for the reticle itself. Turn it on prior to pulling the sight down or from the gunners seat and it works. You can also see the switch tool tip from the pilot seat if you look at the lower left corner of the range/elevation reference card,(mouse turns green). Problem solved, thank you everyone. And yes LiveBait, Inverter was on.

 

There is nothing screwed up with the key bindings like it says in the change log you will need to delete your previous input files from your saved games directory otherwise you will not be able to use the new key bindings.