Jump to content

Recommended Posts

Posted

Still cant get it to turn on. Wh:helpsmilie:at am I missing. I found the intensity knob and turned it both ways, nothing. Is there a power switch that I am forgetting?

Posted (edited)

All pertinent commands/functions:

 

Just for reference, here are the new commands for the pilot sight.

 

HueyPilotSightControls_zps395c1829.jpg

 

It should be noted that the keyboard command for On/Off in v1.2.5 is now the command for Armed/Docked in v1.2.6

Edited by cichlidfan

ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:

Posted

Yes there is a separate power on/off switch too....... behind the sight. You can activate it with the mouse without being able to see it once you know where it is located

Posted

Nope. I've still got nothing that looks like a reticle. I can pull the sight down via mouse click and change elevation and spin the intensity knob but a reticle never appears. Tried RCTRL+m, tried RSHFT+M, tried RCTRL+RSHFT+0, tried RCTRL+RSHFT+0(zero). Nothing brings up a pilot reticle.

Posted

Ok, here's the deal. Whatever is screwed up with the key bindings, there is a little dammed switch ON THE REAR of the pilots sight that is the switch for the reticle itself. Turn it on prior to pulling the sight down or from the gunners seat and it works. You can also see the switch tool tip from the pilot seat if you look at the lower left corner of the range/elevation reference card,(mouse turns green). Problem solved, thank you everyone. And yes LiveBait, Inverter was on.

Posted
All pertinent commands/functions:

 

 

 

It should be noted that the keyboard command for On/Off in v1.2.5 is now the command for Armed/Docked in v1.2.6

 

What's the interest to get those new commands?

I still have old ones because i didn't delete my input profile for Huey before updating, but i don't see why changing...old commands are working fine!

[sIGPIC][/sIGPIC]

Posted
What's the interest to get those new commands?

I still have old ones because i didn't delete my input profile for Huey before updating, but i don't see why changing...old commands are working fine!

The point is that there are also new keyboard commands and the changes were necessary to make the whole setup more, erm, logical (or so :o)

Posted
Ok, here's the deal. Whatever is screwed up with the key bindings, there is a little dammed switch ON THE REAR of the pilots sight that is the switch for the reticle itself. Turn it on prior to pulling the sight down or from the gunners seat and it works. You can also see the switch tool tip from the pilot seat if you look at the lower left corner of the range/elevation reference card,(mouse turns green). Problem solved, thank you everyone. And yes LiveBait, Inverter was on.

 

There is nothing screwed up with the key bindings like it says in the change log you will need to delete your previous input files from your saved games directory otherwise you will not be able to use the new key bindings.

Eagles may soar high but weasel's don't get sucked into jet engines.

 

 

System Spec.

Monitors: Samsung 570DX & Rift CV1

Mobo: MSI Godlike gaming X-99A

CPU: Intel i7 5930K @ 3.50Ghz

RAM: 32gb

GPU: EVGA Nvidia GTX 980Ti VR Ready

Cooling: Predator 360

Power Supply: OCZ ZX Series 80 Plus Gold

Drives: Samsung SSD's 1tb, 500g plus others with OS Win10 64 bit

 

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...