pognhek

Hi all, We tried with a friend to play in multicrew on MP server, and each times my friend enters as cdb into a hot h/c, the engine start to decrease as if we start the shutdown procedure (but everything is visually ok in the aicraft) Is that an issue or a bug? We can see in different post that it seems there is a specific procedure to play in multicrew(enter in cold, press geo/utm and then enter), Is there a document somewhere to describe the procedure? is it possible to enter in an hot aircraft ? Thanks for your help.

Hi Stone sky, You're right, it's a matter of feeling and we all have different expectations and everybody should find what is looking for to have a great campaign. First, in your campaign, we feel that a plenty of work have been done around the scene under our feet, because there is a lot of good and innovative idea. Personnaly, what is missing is diversity and mainly for all the thing i discussed before, because everybody has to find his way. A hard work has been made on scenario, but too heavy on the radio comms and linearity from my point of view. I love the gazelle because of its light way of flight, its agilty, i love to make the dragonfly through the building/trees/terrain topology and always 3 m above the ground. So i love to play with its strengthness with ambush, scout and versatilty. Because of the low/medium range of its weapons, you need to go into the lethal range of targets, that leads to intense approach and careful progression, so i'm quite disapointed when every mission looks like a school bus tour. From my opinion, what is a great campaign (i mainly have all missions aroung m2K, gazelle, F18), you need : -Feeling to progress into action, but also into your way to control your aircraft : so it's a great feeling of achievement to begin a mission with stuffs that you're not sure to achieve, and finally you quit and can say : "i did it!" Not to hard, but not to easy -Unexpected : it's always great to have unexpected actions... you begin a mission with a mindmap of what to do, and suddenly something happen and you have to reorganize your mind how to deals with those new elements/objectives : great feeling of achievement also -time increase intensity : mission that last, increase the feeling that you have to do the things well -Technicity : finding a way to get further than the common use that you can find into the manual or on youtube tutos of your aircraft and functionnaly I don't say that every mission should match with every listed topics, but if each mission have one pinch of this items, it's just the flavour of pepper that you end a mission with a lot of sweat of satisfaction I hope you didn't take my words as aggressive comments, it's my point of view about my love for DCS. Nevertheless, thanks for your work and the way you want to share with us the way YOU love DCS! Don't hesitate if you want more feedback to your future creations! A.

accepted as assumed ou agreed? Nevertheless, same comment for mission 7 and 8... nothing to do, even helos formation was a good idea, but ended in accelerated time....

Hi Stone Sky, just a quick feedback on the almost done MAD campaign on the Gazelle. I'm a very big fan of the Gazelle, and when the MAD Campaign has been available i didn't waste a second to think before dowloading a new campaign taking my favourite Helo as main protagonist. I just finished the 6 first Missions and i'm quite disapointed because, i do not deny that there is a scenario, it must have taken a lot of work to build those missions, but there is nothing to do! On the first 6 missions, the only skills you need to have is taking off, hearing the radio comms(optional), following the nadir, and land! The only task is carrying guys from point A to point B, even when a lot of actions is taking place on ground, your just have to hear radio as if you're just spectators of the action. So when you spent hours to improve your skills with an aircraft and come to those missions, you feel like playing MSFS! I would have hoped more technicity, action and fun! I hope that the 4 last missions will be more exciting and orgasmic so i will not regret the 11 bucks (very expensive comparing to many campaign i bought and that procure much hours and much funs for less) I'll keep you informed.

I finally found out what was going wrong. Something into the "d3dx_user.ini", and previous settings. I made a full repair, and delete the current file, and start with a empty one. And it works. I've tried to reinstall the previous one, and the issue reappeared. Here is my file, if you want to investigate. So thanks for your support. A. d3dx_user.ini

additional info : I made test with a full repair and only your mods (no simplex mods neither open fsr) (and also deleting metashadders2 and fxo directories into saved games) : same issue Do you think it can come from Nvidia settings? (dcs settings are quite common)

Hi lefuneste, Do you really want a track file? I do not really use a mission, i use a self made freeflight mission, do you want this one? But i checked, and it appears on every mission i try. The only mods i have installed : -Open fsr -Simplex v2.31 -Barthek mod terrain causasus and syria Nvidia drivers 512.15 Please find two examples with external and internal sharpen options. A.

hi lefuneste, yes, i know the troubleshooting doc very well yes same issue into external and internal sharpen option. I've tried to play with settings of sharpen when i decrease a lot the value, i can distinguish the game but everything is in exceedance as if i have only 4 colors. No problem, i'll wait the next release, everything is playable without sharpening (and other function works)

HI Lefuneste, I just installed the new version, and i've got an issue with sharpening options. As long as i activated it, i've got a white screen as if everything was overload. I've tried to reinstall from scrash by making a repair, and starting from a brand new d3dx_user.ini, same issue. here is some screenshots, with and without sharpening activated.

i've tried to play with mobile asw... that leads to a permanent transparent white stripe and fps drop... known as a compression issue i returned back to the previous settings and everything returned to normal

yes i do, but in your question i can guess it seems that it's not usual. that's already a part of the answer i'll investigate and find some clues into trackfiles

Hi all, I've got a stupid question. Actually i play a lot on PVE MP serverlike 4YA, that leads to many T/O-Landings- rearm-T/O. and quite often, the stores menu is stuck after rearm. And i'm not able to reconfigure the new weapons or use them (like AGM154/AGM88). I don't know if it's a bug or if it's the consequence of something wrong i could have done. Other question in this state, is there a procedure to reset/reinitialize the weapons configuration? (I've tried to launch tests in the store section of bit menu, but it doesn't solve the problem). Has anyone an idea or suggestions? A.

I made some tests and this afternoon, i was just making carrier training circuit(nothing but sea around carrier), and brutally the fps drops down from 36fps to 6-7, and gpu charge increases from 65 pc to saturate to 100pc. So maybe my issue is coming from an non-understandable increase of gpu charge.

Hi steel jaw. This morning, i made tests as you proposed. And effectively i confirm what you mentioned. Fps measured in dcs is not relevant for evaluating the effects(you can have a laggy state @50fps, and perfect visible fps@24). The only things relevant is when the fps drops down. But i have stable 36 fps when asw is off. And when i put the forced 30fps, i've got a stable 24 fps@ss1.4 But no visible effects on real fps. But ss in dcs seams to be more effective than OTT, but i didn't the have"clear as crystal" state. But when i increase ss into dcs, visible fps drops down dramaticaly. In any configuration tests, the cpu stand around 3-7 percent charge. I'll test on long mission to see if it stay stable and if i observed the fps drops down that i mentionned A.

Hi DeltaMike. I think temps are ok. I tweaked fan speed profiles of CPU/GPU to stay under 70degC. and it works, but fan are always between 90 and 100 % A.

Hi Steel_jaw and thx for your quick reply. I took a look to your previous post and founded the following: is it so simple? just putting the auto settings of Q2 and pushing 30Hz with OTT? did i missed something else(and my w10 is up to date)? I'll test tommorrow and keep you informed. A.

Hi all, I've got an oculus quest2 and a config with RTX 3070, an i7 10700K and 32 Go DDR4, and i think i've reached a quite satisfying settings, but i've three questions : 1) On my config, i can't go up to 36 fps, even when i try to changes settings (SS, MSA, aso) But it's almost always stable. Is there a settings that i missed to explain the incapacity to get higher fps? 2) When i spent some times (around 1h/ 1h30), the fps drops down to 10-16fps during a while. If i try to wait, sometimes it disappear and the fps come back (but sometimes not). I've tried to kill some apps to recover memory, sometimes it works (and sometimes not). It sounds like a buffer saturation, no? 3) When i play DCS, GPU is almost 100%, CPU is almots 3%, RAM is almost around 22-25Go but SWAP memory is around 33Go, Is it normal that the CPU is quite not working whereas the GPU is full charged. For setting up, i've followed mainly this site : https://www.gamersbynight.com/dcs-settings-vr/, i've got 3Dmigoto VR enhancer mod and DCS VR shaders mods for 2.7. My setup is mainly : Oculus tray tool: SS: 1.4 Everything disable ot OFF. Server priority : realtime Quest link : low, 3648,500 DCS: Texture : high Terrain Txt: low Clouds: ultra Water Medium SS: 1 MSAA 2x Everything Off (SSAA, SSLR, SSAO) Antistrophic Filtering : 16X Thanks by advance for your advices. A.

hi all! i decided to play back the gazelle since the 2.7, and i've restarted the campaign. But when i try navigation through waypoint, i've got a curious issue, nadir needle give a heading but when i fly through the right direction, the needle continue to turn and, at the end makes me make a circle. i never encountered such issue into campaign on previous dcs version. and i think that i perform the right procedure for startup sequence. does anyone have this issue? thanks for your incoming help A.

Sorry, quite new and i discovered the issue was described on the right forum : https://forums.eagle.ru/topic/262748-mission-8-package-stuck-at-wp-2/ waiting for 2.7 ... BR,

Hi everybody, I've got an issue on red flag campaign mission 8. Start of mission seems going well. I go in formation. Reaper ask us to go on chattermark 1 (red4) but the channel is jammed, then we start to orbit in formation around wp2 and it nevers ends until i'm out of petrol(and it last a lot during night).... no comm or sign to break with banshee. I tried many times, same issue... I've tried to break by myself when i ses two f4 on radar to kill them. But all package is still stuck on wp 2. I've tried to edit the mission to understand but i can't see any triggers or event. It's empty. Could you help me to say if i have a bug or if i missed something? Thxs by avdance,

Edit

Hi lefuneste, I've tried ver 10.0 but it didn't work for me(no menu with LSHift+F7) (maybe because i'm not in 2.7 at this point). I've decided to launch a full repair of DCS and reinstall both version (9.4 and 10) from your last depot 9.4 is partially working again because label masking is not working and i've curious things around "SHARPEN/FXAA page" but it can be a misunderstanding from my side. I spent some times to test and i'll try to explain : when i'm on "option cockpit", settings of sharpen/luma seems to be applied only on HUD display not into the cockpit and no enhance feature is applied on cockpit and external environment When i'm on "cockpit and external" sharpen/luma are still applied only on HUD BUT changes on ext sharpen/ext luma is applied on environnement and "inside" the cockpit that leads to a great impression that's working. When i'm on Cockpit+FXSAA, every settings and enhancements around cockpit/external are diseapearing, and i still have only influence on HUD when changing sharpen and LUMA. When i'm on "Nothing" into SHARPEN/FXAA page, every settings are disapearing.... and restoring the poor blur VR environnement. AND i discovered that when i'm not in the settings of your mod, th ALT+F8 toggle from SHARPEN/FXAA page is still working during the game. so i'm asking myself, if i was not making a confusion around all this pages and the way they work, thinking that all the settings from all pages were active and, as i was focused on effect enhancement inside and outside the cockpit, maybe i thought the mods was broken because every enhancement i was looking for, were inactive. And for adding into confusion, i maybe clicked during the game on Alt+F8 giving me the impression that everything was not working.... So the way i use the mod is to toggle into "cockit+external" page during the game to make the mod work (but label masking is still not working). Well, i hope i have been clear !! And if you need more explanations because of my poor english, maybe i can send you a private message in french for more clarity. BR, A.

Hi lefuneste, Sorry to bore you again, but everything was working fine until this week-end. The mods seems not to work anymore; I still have the menu when shift F7, but nothing is changed when i try to change some characteristics. I checked the files into /bin folder, everything seems to be OK. I desinstalled/installed the mods many times with OvGME without success, i even tried manually... no success... A.

HI Lefuneste, i founded the answer by myself! I created a "d3dx_user.ini" in the folder where the dcs.exe is!! and it works !!! I don't understand why this file don't exist in my config, but nevermind! So thanks for your support, and good job for your mods, it works great, that we could translate in french : "ça déchire, mec!" A.

XXXeditXXX My answer was bullshit