Iku_CC

I just can't understand why this bird drops down left wing so easy at takeoff......it feels so wrong behavior. Even if my stick is almost full right it drops wing to left...I'm confused...

I finally manage to end AAT10 with Q- and got end text for AAT campaign but campaing stayed in active state. Was that error in campaign or should I end AAT10 better than Q-? I know I can edit logbook.lua to end this campaign but just wanted to know am I wrong or right...better sayed can I edit lua file without feeling I'm cheating on this..:blush:

Ok..hope you will get settled this...

yep...something is wrong...you said it was second hand..did you mean it is used stick..if so I hope you have deal to return it as NeilWillis said...or if you got it so cheap that you want to fix it by your self (if it can fixed). New Warthog stick can be purchased separately...so that could be other way..

Because stick is twisting it's feels that you haven't installed stick like it's need to be. Yellow arrow at stick and text on big plate should point at you. Check is stick attached to bottom of that oval counterpart and have you tighten gray "tensioner"...there should not be any twisting (well small one but not 20deg).

Archer7..do you check/change QFE when you get that information from ATC when you ask takeoff or landing? In some missions it's different than default so you need to change that. With these wonderfull missions I have got habit to always check QFE when that information have send when "talked" to ATC..:).

I agree gear_monkey..I read somewhere that this mod is not needed anymore..so I tried without it and A10C was as bad as it was before I aplied this mod. So I think that newer DCS planes have reworked views (at Dora and F86 views work ok)..but older ones not...this is just my five cents....and yes...I have PeterP reworked A10 cockpit mod working..:).

1. User CP->Edit Signature 2. Download badge (Option 2 - Upload Image From Your Computer and Browse folder where you have badge) 3. Click "Insert Signature Picture" to get [sIGPIC][/sIGPIC] text in to signature 4. Preview Signature 5. If all ok....Save signature

Seems that in default there is no DirectX button for Engine start... As you can see I use DirectX buttons DX29=IDLELON=Engine Stop Left and DX30=IDLERON=Engine Stop Right. Which you can see at DCS A10C definition MapKey(&Throttle,IDLELON,DX29); MapKey(&Throttle,IDLELOFF,PULSE+ Left_engine_start); MapKey(&Throttle,IDLERON,DX30); MapKey(&Throttle,IDLEROFF,PULSE+ Right_engine_start); At ttm file I have these lines.. // ============================= // Engines & APU // ============================= define Left_engine_start R_ALT+HOME define Right_engine_start R_CTL+HOME You can add for IDLELOFF and IDLERON DirectX buttons too but then you need use TARGET (script or GUI). I hope this helped..:)...and there are many other ways to do that but I did like this...and it's working..

TARGET Script is just must if you want more action per button than you can with "plug n pray"...I think..it's maybe hard to learn but worth of it. Script is better because you can edit with notepad..:). You can do those keyboard data files (.ttm) by exporting plane keyboard commands to html..import them to excel..do few things there..copy paste few time...find replace command several ten times....it's just so easy....:D...ok..it's not easy but I like to do that way. When I get back home I check how I did that throttle idle on my system (I have throttle with DX input so it could be almost same as "plug n pray")..

New to DCS Dora...tested yesterday and without any assistant..it was very challenging...manage to roll plane to start of runway :joystick: Two takeoff tests...two crashes....:D. Prolly I need more training... I also had mistake on my Warthog setup so that was making things difficult. With this Dora it's time to change my Ch Pro Pedals right break potentiometer (I have new one waiting)..it could be easier to brake if both brake pedals are working with same curve.

Seems that this black page over the map is coming for single missions which use Crimean Peninsula area. I looked several missions..many of them are Threshor's Missions..but also found it some other which was also made over the Crimea. In this attached picture are mission kneeboard maps from Ammo depot.miz..

I've been using custom kneeboards and now I have weird and unwanted picture at A10C mission kneeboard pictures. Can someone tell where I can try to find and fix this. It's look like it's place where from mission kneeboards are maded and only at A10C..all other planes are ok.

That kind of extension I've been looking for..nice one..:). I've attached my stick to old Wheel Stand Pro V1 with my own made plate...but it's not 100% good. That kind of bended extension would make it 100% perfect..:)

FYI...just tested Windows 10 and this same problem exists there too....and same register tweak helped (id's seems to be same). That usb hub power saving tip didn't helped in Win 10....

I just downloaded and installed both TTQ part A and B and part A is still installing to wrong place...or is this newer version somewhere else than in under this link https://www.digitalcombatsimulator.com/en/files/699221/ ? Also I'm wondering why "Copy of TT.jpg" is named like that..should it be TT.jpg?

I checked that version was ok at my first install...but I reinstalled files and after that I saw that tanker...but I missed WP4 from right (TOT was ok) so I need to fly mission again....sorry that I bother you with this. At my first attempt I didn't notice that I need to turn to right when rolling out of parking area so I missed right fly starting position at ramp...I started from later place at airfield...could that make that tanker didn't showed up...well no need to know...now it's working?

Hmmm..I'm sure that I have latest version because in my first mission and both trainings I needed to use ch 251.Also I bought this campaign 09/24 and U have updated it 09/22...but I check when I get home.

Campaigns AFT02...I was trying to fly AFT02 today but there was no tanker in the air. I was flying towards WP4 and tryed to contact tanker...but there was no radio for it..also TACAN was not beeping and compass needel was gone crazy (rolling all over the place). I made another attempt but still no tanker channel or TACAN. I looked miz file and if I looked right (I don't no nothing about mission editor) it will start at air time 0:00:00....but rendevouz should be time 22:23:00. Am I missing something or is there error on file or does latest update broke something? Btw..I finally manage to pass thru first refuel mission..

AFT01 training feelings... Damn that AR is so difficult that I 'm starting to hate that damn man behind boom. I have just manage only once to get fuel and that was only 6 seconds. In my feelings that man behind boom is not doing his job well..:D I have programmed curve change for my Warthog stick but that is not helping me...just can't get in the refuel situtation..:joystick:..been looking those youtube videos where it's look easy as putting your fingers cross..but for me no joy

I use TARGET Script and I have like this..hope this helps some..:) At my DCSA10C.tmc -file // DirectX 22= Flaps Up // DirectX 23 = Flaps Down //When pushing to fwd position send DirextX 22 MapKey(&Throttle,FLAPU,DX22); //When switching to middle position I use release for FLAPU and send DirectX 23 MapKeyR(&Throttle,FLAPU,DX23); //When pushing to aft position send DirextX 23 MapKey(&Throttle,FLAPD,DX23); //When switching back to middle position I use release for FLAPD and send DirectX 22 MapKeyR(&Throttle,FLAPD,DX22); //Checking Flaps switch position at throttle and put switch in same position at game if(Throttle[FLAPU]) ActKey(KEYON+DX22); else if (Throttle[FLAPD]) ActKey(KEYON+DX23); I use those directx button command for most of my throttle swithces.. you can also use key presses for this..(Flaps_down 'f' and Flaps_up L_SHIFT+'f' ) MapKey(&Throttle,FLAPU,PULSE+Flaps_up); MapKeyR(&Throttle,FLAPU,PULSE+Flaps_Down); MapKey(&Throttle,FLAPD,PULSE+Flaps_Down); MapKeyR(&Throttle,FLAPD,PULSE+Flaps_up); -Iku

I tested to drop PeterP neck mod and found that default is wierd...so I went back to PeterP's..:). It just feels better with Track-Ir..:).

Snowtiger..make advanced key press for Shift+Backspace.... Look my profile at here.. http://forums.eagle.ru/showthread.php?t=129807

+1..it's ok to use with triple monitors + fourth for exported views(5760x1200 for flying and 1650x1050 for exported MFD+CDU). I get about 30-40fps with GTX670 4Gb...I think that at gpu you need 3Gb or 4Gb ram. Samsung 105" curved could be awesome with track-ir (or without it)..:D....only 120000$

Howdy, I don't have anymore X52 pro but here is my old X52 Pro A10c and P51 profiles if you want to try. There is lot of commands where name is ending "Advanced"..that is better way to program X52...there is with same name normal commands but they don't work as I wanted them. Hope these helps you or someone..:). Jpgs are screenshots from A10 profile... DCS X52Pro Profiles by Iku.zip