Jump to content

humptydumpty

Members
  • Posts

    636
  • Joined

  • Last visited

Everything posted by humptydumpty

  1. I do have a similar issue that the system randomly restarts or get a BSOD , the PSU is brand , it was purchased the same day that I purchased the 3050 , it's a CM 650w Bronze. But I do think that the system could have also have a memory issue. Gonna run memtest later. The random restart is only during game play. So either RAM / GPU / PSU , I did a Furmark test and it ran perfectly well. Memtest is next
  2. @Hector45 How are you monitoring this memory usage during the F2 process ?
  3. @LucShep Set it to 65 I am seeing fps at 50-64 on the Caucasus map on Multiplayer. The terrain load time is a little too high but I guess that's ok. It was the same even before setting up the autoexec and the pagefile. Just wanted to know , does everyone get stutters also when changing views using F2 ? or is it just me ?
  4. @LucShep Thanks , I am not sure if Vsync is ON , but I will check. Yeah need a bigger SSD now.
  5. @LucShep I followed your advice and 60 fps in the autoexec. now in DCS i am seeing only max of 35-40 fps ? is that fine ? Also about the pagefile , realized my C drive is a 120GB SSD and the space left is only 24 GB , do have a 2TB HDD where all the sims are installed. So what I did was set 32GB on the D drive , for now there is not exit of DCS but there is heavy stuttering , especially when using F2 to watch some aircraft
  6. @LucShep Hi, The PSU is a Cooler Master 650w 80+ Bronze , purchased it together with the GPU. Will try out your suggestion. Let you know.. Thanks.
  7. I think I am seeing 90 fps in Caucasus in multiplayer with around 10 users. But DCS just quits. Also installed the Simplex Shader Mod.
  8. @LucShep Thanks , yeah its so much better
  9. @Buschwick Purchased the RTX 3050 8GB today , It's a Galax make , started DCS and joined Caucasus aerobatics online (kept everything to MAX , don't understand the SSLR / SSAO and the other SSxx something so not sure what to use ) also no DOF and Motion Blur , now when I entered the lobby selected the Mig 21 and clicked on "Fly" Dcs just quit on me , so then I went reloaded and went back to Caucasus aerobatics online and selected the L-39 , managed to get in the pit but after a few seconds DCS quit again , then reloaded DCS and went back to Aerobatics online Nevada , took the Mig21 and no crash , it was super smooth . I couldn't read the fps as I am using a 32 inch TV hence the text wasn't clear , it's probably somewhere between 60-80 fps but can't say. I use X-plane a lot but since many months had not done any simming because I was tired of the low fps due to the AMD RX 550 2GB GPU. But now XP is giving 50-60 fps maxed out. I could have opted for the 3060 12GB but the price difference is almost 45% higher than it should be. But overall I am happy. I can do some tests later if you want and tell you exactly the performance that I am getting. Maybe once the gpu prices drop to normal I will think of something higher. BTW the resolution I am using is 1920 x 1080
  10. Hi @LucShep Thanks for the info, have been searching for used Nvidia / Amd cards , but even the used one's have ridiculous pricing,. So thought that it's better to get a brand new card and the 3050 kinda fits right in the budget. I was considering the GTX 1650 but the 3050 looks way more attractive. Can do with some settings not set. Thanks.
  11. Hi , Getting back in to DCS after a long time and considering a new GPU - RTX 3050 8GB (this is within my budget ) will also be using it with X-plane, due to the weird pricing the 3060 is not within reach as 3060 was the one i wanted , but the price on the Nvidia Site (India) and the dealers is a 40% difference , so just wondering anyone here does have a similar GPU and can give me some pointers to the performance that I would get. Plan on purchasing this today if I have some feedback from anyone here using this GPU. My current rig : Ryzen 5 1600x 16GB DDR4 RX 550 2GB. Regards.
  12. The Allegro 3144 jumps around even without a magnet , but i will try what you said. Thanks again.
  13. U r a genius :) thanks, it worked. :thumbup: Have a beer or two :) The MH 481 sensor seems stable , the Allegro 3144 keeps jumping. Now i just need to figure out how to connect it to the pedals :) all home made. Think i will use a ball bearing and stick it and put the sensor in the center so only the outer portion of the bearing will move where the magnets will be connected. M trying to make an anti torque pedals for the helis. Could be good also for the fixed wings. Would love to do a similar thing for the cyclic , for the cyclic i am using an arduino R3 with the MPU 6050 , though for the helis its perfect but it needs to be calibrated all the time. Will do the same for the collective , the collective is using a Mega with a pot though its very stable but i can then use the R3 and the Mega for something else.
  14. Hi, I have already done "Save settings to device" and did it again but the LED does not blink. It's the same on both the Pro Micros. Also unplugged and plugged it in. This what i see in Devices and Printers https://ibb.co/rxPNk1m That Axis just doesn't move, gave VCC / GND / Data to the right pins on the pots and also on the sensor , the Data pin i used on the Micro is A3
  15. @Sokol1_br Here https://ibb.co/ZxrBT5G I have flashed using the latest MMJoy2 from sites.google.com in Devices it will show the device but the axis won't move. I have A3 for the sensor and also the pots Only have assigned one axis right now for testing.
  16. AH thanks, i could get the joystick under windows devices , but the sensor does nothing if i use the magnet , the same sensors work on the logitech connector but it's spiking. Think i burnt the MH 481 sensors on the Pro Micro :cry: The MH 481 has VCC Data GND The Allegro 3144 has VCC GND Data Yes these are not the standard sensors used by many. The MH 481 had worked when i tried it long back but then i had no time and with this lock down thought retrying it. Gonna tinker some more. Connected a Pot but even with it there is no axis movement and i have setup the axis for it , the same pot works on the mega , i have two pro micros and the result is the same , so hall sensor and even with the pot its not working. The LED on the Pro Micro remains GREEN even after rebooting / unplugging it doesn't change. Also tried a toggle switch but even that is not working.
  17. Hi, I am trying to setup the pedals using hall sensors and a Pro Micro, flashed the Micro with the MMJoy setup and shows up as a MMJ-Reset device , but on double clicking the device in Devices and Printers (joystick) it says its disconnected , The hall sensors that i have are the MH 481 and the Allegro 3144. Any help appreciated.
  18. There is some MP connection timer in todays update, for me connecting to MP still no luck , guess 16GB don't cut it anymore. Board doesn't support more than 16GB. damn. Or maybe my 2GB VRAM is now of no use even at low resolution for textures.
  19. agree it seems to be a management issue , either vram or ram .
  20. Why not give it try ? it may work or maynot , had this issue during low RAM and by managing it manually it worked, but that was before the last update.
  21. I don't have the F-14 , but there is a thread about users probably needing 32GB for it. Single player for me is not an issue but MP is just can't connect anymore. Think this is the thread : https://forums.eagle.ru/showthread.php?t=234964&page=8
×
×
  • Create New...