Capt Zeen

That fps drop is not usual. Even with the M2000, the export.lua dont export any data, so, thats weird. Send me your export.lua and i can take a look.

Updated post#3 with UH1H formulas ready to use !

:thumbup:

Send me the export you are actually using.

I made a profile for each of the planes and chopers i got. Av8 still not in my account.

Looking at your profiles, i dont see nothing wrong. Run DCS, start a mision with the A10C, and then, exit from the mision. Then go to DCS/logs/dcs.log and check if there is a error related to the export.lua If you want, send it to me and i can take a look.

probably you are installing the CapLoz profile for the A10C. Or an old profile. ED made changes on some code time a go, and all the old export.lua dont work anymore. Just go to my website: www.captzeen.com and download the latest export.lua from the download section. With that one, everything works again.

Formulas ready to use: Mi-8 Barometric Altitud: truncate((VD_10K_L_100/65536)*10000) QFE: truncate ((VD_10K_L_PRESS/508)+661) IAS: Ifless( IAS_L 63634 ( Ifless( IAS_L 56557 ( Ifless( IAS_L 49282 ( Ifless( IAS_L 41942 ( Ifless( IAS_L 34734 ( Ifless( IAS_L 27394 ( Ifless( IAS_L 20054 ( Ifless( IAS_L 13041 ( Ifless( IAS_L 4587 ( Ifless( IAS_L 2228 ( IAS_L*0,00449 ) ((0,0212*(IAS_L-2228))+0))) ((0,00591*(IAS_L-4587))+50))) ((0,00713*(IAS_L-13041))+100))) ((0,00681*(IAS_L-20054))+150))) ((0,00681*(IAS_L-27394))+200))) ((0,00694*(IAS_L-34734))+250))) ((0,00681*(IAS_L-41942))+300))) ((0,00687*(IAS_L-49282))+350))) ((0,00707*(IAS_L-56557))+400))) ((0,00789*(IAS_L-63634))+450)) Variometer: Ifless( VARIOMETER_L 56032 ( Ifless( VARIOMETER_L 46858 ( Ifless( VARIOMETER_L 40304 ( Ifless( VARIOMETER_L 35717 ( Ifless( VARIOMETER_L 34406 ( Ifless( VARIOMETER_L 32768 ( Ifless( VARIOMETER_L 31129 ( Ifless( VARIOMETER_L 29818 ( Ifless( VARIOMETER_L 25231 ( Ifless( VARIOMETER_L 18677 ( Ifless( VARIOMETER_L 9503 ( (VARIOMETER_L*0,00105)+-30) ((0,00109*(VARIOMETER_L-9503))+-20))) ((0,00076*(VARIOMETER_L-18677))+-10))) ((0,00065*(VARIOMETER_L-25231))+-5))) ((0,00076*(VARIOMETER_L-29818))+-2))) ((0,00061*(VARIOMETER_L-31129))+-1))) ((0,00061*(VARIOMETER_L-32768))+0))) ((0,00076*(VARIOMETER_L-34406))+1))) ((0,00065*(VARIOMETER_L-35717))+2))) ((0,00076*(VARIOMETER_L-40304))+5))) ((0,00109*(VARIOMETER_L-46858))+10))) ((0,00105*(VARIOMETER_L-56032))+20)) Radar Altimeter: Ifless ( A_036_RALT 40960 (Ifless ( A_036_RALT 29950 (A_036_RALT/299,5) ((0,0181*(A_036_RALT-29950))+100)) ) ((0,02034*(A_036_RALT-40960))+300)) Heading: ((UGR_4K_HEADING_L*0,00009587)+0) * 57,282 Course: ifmore ( (((UGR_4K_COMMANDED_COURSE_L/65536)*360) + ((UGR_4K_HEADING_L/65536)*360)) 359 (((UGR_4K_COMMANDED_COURSE_L/65536)*360) + ((UGR_4K_HEADING_L/65536)*360)-360) (((UGR_4K_COMMANDED_COURSE_L/65536)*360) + ((UGR_4K_HEADING_L/65536)*360)) ) KA50 Variometer: ((VARIO_SPEED/65536)*60)-30 Radar altimeter: Ifless ( RALT_ALT 61138 (Ifless ( RALT_ALT 54591 ( Ifless ( RALT_ALT 49420 ( Ifless ( RALT_ALT 30350 ( Ifless ( RALT_ALT 12045 (RALT_ALT/602,25) ((0,00163*(RALT_ALT-12045))+20)) ) ((0,00524*(RALT_ALT-30350))+50)) ) ((0,00967*(RALT_ALT-49420))+150)) ) ((0,01527*(RALT_ALT-54591))+200)) ) 300 ) IAS: truncate((AIRSPEED*350)/65536) Heading: (HSI_HDG/65536)*360 Barimetric Altitude: truncate((ALT_1000M/65536)*10000) QFE press: truncate(((ALT_QFE_PRESS/65536)*200)+600) Course: (HSI_DES_COURSE/65536)*360 UH-1H Barometric Altitude (PALT_10000/65535)*100000 QFE (last digit is decimal) ((PALT_PRESS*0,00004425)+28,1)*10 Radar Altimeter Ifless( RALT_NEEDLE 48916 ( Ifless( RALT_NEEDLE 42533 ( Ifless( RALT_NEEDLE 35822 ( Ifless( RALT_NEEDLE 31848 ( Ifless( RALT_NEEDLE 16118 ( (RALT_NEEDLE*0,006204)+0) ((0,006279*(RALT_NEEDLE-16118))+100))) ((0,07549*(RALT_NEEDLE-31848))+200))) ((0,07554*(RALT_NEEDLE-35822))+500))) ((0,07722*(RALT_NEEDLE-42441))+1000))) ((0*(RALT_NEEDLE-48916))+1500)) Vertical Velocity Ifless( VVI_P 59309 ( Ifless( VVI_P 50462 ( Ifless( VVI_P 44564 ( Ifless( VVI_P 20971 ( Ifless( VVI_P 15073 ( Ifless( VVI_P 6226 ( (VVI_P*0,16062)+-4000) ((0,16955*(VVI_P-6226))+-3000))) ((0,08477*(VVI_P-15073))+-1500))) ((0,08477*(VVI_P-20971))+-1000))) ((0,08477*(VVI_P-44564))+1000))) ((0,16955*(VVI_P-50462))+1500))) ((0,16062*(VVI_P-59309))+3000)) IAS Ifless( IAS_NOSE 54066 ( Ifless( IAS_NOSE 36044 ( Ifless( IAS_NOSE 28835 ( Ifless( IAS_NOSE 25886 ( Ifless( IAS_NOSE 20971 ( Ifless( IAS_NOSE 12452 ( Ifless( IAS_NOSE 4915 ( (IAS_NOSE*0,00407)+0) ((0,00133*(IAS_NOSE-4915))+20))) ((0,00117*(IAS_NOSE-12452))+30))) ((0,00203*(IAS_NOSE-20971))+40))) ((0,00339*(IAS_NOSE-25886))+50))) ((0,00277*(IAS_NOSE-28835))+60))) ((0,00222*(IAS_NOSE-36044))+80))) ((0,00262*(IAS_NOSE-54066))+120)) Heading (GMC_HDG/65535)*360 Course Mark ifmore ( ((360-((GMC_HDG_MARKER/65535)*360))+((GMC_HDG/65535)*360)) 359 (((360-((GMC_HDG_MARKER/65535)*360))+((GMC_HDG/65535)*360))-360) ((360-((GMC_HDG_MARKER/65535)*360))+((GMC_HDG/65535)*360)) ) ..

Thanks to the brillant work of ArturDCS we can use the Saitek/logitek flightPanels in DCSWorld DCSFlight Panels Trying to setup the different values to show in the PZ70 panel , like the variometer, IAS, etc, i found dificulty when those values are scaled values in DCS. To solve the problem i created this formula calculator so the task is now very easy to do. How to use it: - First of all you need to know the name of the DCS-BIOS variable you want to show. You can use the DCSFP software to get it. - Insert the DCS-BIOS variable name and the max value on the form. - Now you need to know the values of the scales inside DCS. To get those values usually you need to look at mainpanel_init.lua and search for the variable. - Copy the input values between the {} and paste into the form - Do the same with the output values. Remember do not copy the {} only the values inside - Only numeric values are allowed for the input and output - Click on create formula and if everything is ok, you get your formula ready to paste in DCSflightpanels Example for the MI8 variometer: DCS-BIOS value Name: VARIOMETER_L DCS-BIOS Max value: 65535 DCS Input values: -30, -20, -10, -5, -2, -1, 0, 1, 2, 5, 10, 20, 30 DCS Output values: -1.0, -0.71, -0.43, -0.23, -0.09, -0.05, 0, 0.05, 0.09, 0.23, 0.43, 0.71, 1.0 Formula generated for this example: Ifless( VARIOMETER_L 56032 ( Ifless( VARIOMETER_L 46858 ( Ifless( VARIOMETER_L 40304 ( Ifless( VARIOMETER_L 35717 ( Ifless( VARIOMETER_L 34406 ( Ifless( VARIOMETER_L 32768 ( Ifless( VARIOMETER_L 31129 ( Ifless( VARIOMETER_L 29818 ( Ifless( VARIOMETER_L 25231 ( Ifless( VARIOMETER_L 18677 ( Ifless( VARIOMETER_L 9503 ( (VARIOMETER_L*0,00105)+-30) ((0,00109*(VARIOMETER_L-9503))+-20))) ((0,00076*(VARIOMETER_L-18677))+-10))) ((0,00065*(VARIOMETER_L-25231))+-5))) ((0,00076*(VARIOMETER_L-29818))+-2))) ((0,00061*(VARIOMETER_L-31129))+-1))) ((0,00061*(VARIOMETER_L-32768))+0))) ((0,00076*(VARIOMETER_L-34406))+1))) ((0,00065*(VARIOMETER_L-35717))+2))) ((0,00076*(VARIOMETER_L-40304))+5))) ((0,00109*(VARIOMETER_L-46858))+10))) ((0,00105*(VARIOMETER_L-56032))+20)) NOTE: This is the first version so some isues can happen if you dont fill the form correctly. Let me know how it goes!. DCSFP formula generator hope you like it! ..

Fixed a problem with some values. Now it works I created a new post for the coments: https://forums.eagle.ru/showthread.php?t=206171 and mantain this one more clear. ..

I am using DCS output/input values because is the name you can find in the mainpanel_init.lua and there is where you get the values. That way you can't fail, hehe !

:thumbup:

Well, trying to get the formulas for different scaled values and different airplanes can be a pain! So i created a formula generator for that. You can find it at : http://www.captzeen.com/helios/create_formula.asp This is the first version so some isues can happen if you dont fill the form correctly. Let me know how it goes! Hope you like it !

Some time ago i made a fix for the TACAN, for the CapLoz profile, but dont know if a bornad card can take benefits of it.

I started 2 years ago a new SU25T profile, using the code os the su27, but other projects interfere with the development of it. I got it advanced more or less at 75%, but need to find some time to finish it.

OK, at last, radar altimeter fixed with the correct ramp formula: Ifless ( RALT_ALT 61138 (Ifless ( RALT_ALT 54591 ( Ifless ( RALT_ALT 49420 ( Ifless ( RALT_ALT 30350 ( Ifless ( RALT_ALT 12045 (RALT_ALT/602,25) ((0,00163*(RALT_ALT-12045))+20)) ) ((0,00524*(RALT_ALT-30350))+50)) ) ((0,00967*(RALT_ALT-49420))+150)) ) ((0,01527*(RALT_ALT-54591))+200)) ) 300 ) I update my last post with the correct code and attachment, so download it again if you get it yesterday. bye !

Just in case some one else want to use my KA50 profile, here you got it. UPDATE: Radar altimeter fixed ! ! !! PZ70 - CRS Position: display with Desired Course, LCD knob with HSI_COURSE_ROT +/- , Auto Throtle switch with HSI_DH_DTA auto/manual - HDG position: display with Heading - IAS position: display with IAS - VS position: display with radar altimeter and VVI - ALT position: display Baro-Altimeter and QFE pressure, LCD knob with QFE Knob inc/dec PZ55 -GEARLEDS 100% operatives like in the cockpit -GEAR LEVER activate gear lever -Weel rotator with radio selector for VHF2, VHF1, SW, and Ground Crew. Last option (start) empty -Master BAT activates batt 1 cover and switch -Master ALT activates batt 2 cover and switch -Avionics Master activates Inu power, K-041 power and Nav system power -Fuel pump activates FWD and AFT fuel pumps -DE-ICE activates rotor anti ice and engine anti ice -PITOT HEAT activates the two pitots heats - COWL (empty) -Lights PANEL activate cockpit light panel -BEACON activae beacon light -NAV activate navigation lights at 100% -STROBE activate pit lights -TAXI activate formation lights at 100% -LANDING activates landing lights In case you got problems with the profile, copy the lines from the file between "BeginPanel" and "EndPanel" of each one, and paste it on your profile file. hope you like it !! #This file can be manually edited using any ASCII editor. #File created on 07/04/2018 0:00:00 07/04/2018 14:21:17 # ***Do not change the location nor content of the line below*** Airframe=Ka50 PanelType=PZ55SwitchPanel PanelInstanceID=\\?\hid#vid_06a3&pid_0d67#7&3897939a&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} PanelSettingsVersion=0X BeginPanel SwitchPanelDCSBIOSControl{1KNOB_ENGINE_OFF|radio selector VHF2}\o/\o/DCSBIOSInput{RADIO_SELECTOR|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1KNOB_ENGINE_RIGHT|radio seelctor VHF1}\o/\o/DCSBIOSInput{RADIO_SELECTOR|SET_STATE|1|0} SwitchPanelDCSBIOSControl{1KNOB_ENGINE_LEFT|radio selector SW}\o/\o/DCSBIOSInput{RADIO_SELECTOR|SET_STATE|2|0} SwitchPanelDCSBIOSControl{1KNOB_ENGINE_BOTH|radio selector gr cr}\o/\o/DCSBIOSInput{RADIO_SELECTOR|SET_STATE|3|0} SwitchPanelDCSBIOSControl{1LEVER_GEAR_DOWN|gear down}\o/\o/DCSBIOSInput{GEAR_LEVER|SET_STATE|1|0} SwitchPanelDCSBIOSControl{1LEVER_GEAR_UP|gear up}\o/\o/DCSBIOSInput{GEAR_LEVER|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_MASTER_BAT|batt 1 ON}\o/\o/DCSBIOSInput{ELEC_BATTERY_1_COVER|SET_STATE|1|0}\o/DCSBIOSInput{ELEC_BATTERY_1|SET_STATE|1|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_MASTER_BAT|batt 1 OFF}\o/\o/DCSBIOSInput{ELEC_BATTERY_1|SET_STATE|0|0}\o/DCSBIOSInput{ELEC_BATTERY_1_COVER|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_MASTER_ALT|batt 2 ON}\o/\o/DCSBIOSInput{ELEC_BATTERY_2_COVER|SET_STATE|1|0}\o/DCSBIOSInput{ELEC_BATTERY_2|SET_STATE|1|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_MASTER_ALT|batt 2 OFF}\o/\o/DCSBIOSInput{ELEC_BATTERY_2|SET_STATE|0|0}\o/DCSBIOSInput{ELEC_BATTERY_2_COVER|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_LIGHTS_PANEL|cockpit panel light}\o/\o/DCSBIOSInput{LIGHT_COCKPIT|SET_STATE|1|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_LIGHTS_PANEL|cockpit panel light}\o/\o/DCSBIOSInput{LIGHT_COCKPIT|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_LIGHTS_BEACON|beacon on}\o/\o/DCSBIOSInput{LIGHT_BEACON|SET_STATE|1|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_LIGHTS_BEACON|beacon off}\o/\o/DCSBIOSInput{LIGHT_BEACON|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_LIGHTS_NAV|nav lights on}\o/\o/DCSBIOSInput{OP_NAV_LIGHTS|SET_STATE|3|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_LIGHTS_NAV|nav lights off}\o/\o/DCSBIOSInput{OP_NAV_LIGHTS|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_LIGHTS_STROBE|tip light on}\o/\o/DCSBIOSInput{LIGHT_ROTOR_TIP|SET_STATE|1|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_LIGHTS_STROBE|tip lights off}\o/\o/DCSBIOSInput{LIGHT_ROTOR_TIP|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_LIGHTS_LANDING|landing light on}\o/\o/DCSBIOSInput{LIGHT_LANDING_ON_RETR_OFF|SET_STATE|2|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_LIGHTS_LANDING|landing light off}\o/\o/DCSBIOSInput{LIGHT_LANDING_ON_RETR_OFF|SET_STATE|1|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_LIGHTS_TAXI|form light on}\o/\o/DCSBIOSInput{LIGHT_FORMATION|SET_STATE|3|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_LIGHTS_TAXI|form light 0ff}\o/\o/DCSBIOSInput{LIGHT_FORMATION|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_DE_ICE|de icing systems on}\o/\o/DCSBIOSInput{OP_ROTOR_DEICE|SET_STATE|1|0}\o/DCSBIOSInput{OP_ENG_DEICE|SET_STATE|2|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_DE_ICE|deicing systems off}\o/\o/DCSBIOSInput{OP_ROTOR_DEICE|SET_STATE|0|0}\o/DCSBIOSInput{OP_ENG_DEICE|SET_STATE|1|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_PITOT_HEAT|pitots heat on}\o/\o/DCSBIOSInput{OP_PITOT_PORT_HEAT|SET_STATE|1|0}\o/DCSBIOSInput{OP_PITOT_RAM_HEAT|SET_STATE|1|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_PITOT_HEAT|pitots heat off}\o/\o/DCSBIOSInput{OP_PITOT_PORT_HEAT|SET_STATE|0|0}\o/DCSBIOSInput{OP_PITOT_RAM_HEAT|SET_STATE|0|0} SwitchPanelDCSBIOSControl{1SWITCHKEY_FUEL_PUMP|fuel pumps ON}\o/\o/DCSBIOSInput{FUEL_FORWARD_PUMP_POWER|SET_STATE|1|0}\o/DCSBIOSInput{FUEL_AFT_PUMP_POWER|SET_STATE|1|200} SwitchPanelDCSBIOSControl{0SWITCHKEY_FUEL_PUMP|fuel pumps OFF}\o/\o/DCSBIOSInput{FUEL_AFT_PUMP_POWER|SET_STATE|0|0}\o/DCSBIOSInput{FUEL_FORWARD_PUMP_POWER|SET_STATE|0|200} SwitchPanelDCSBIOSControl{1SWITCHKEY_AVIONICS_MASTER|nav systems on}\o/\o/DCSBIOSInput{PPK800_INU_POWER|SET_STATE|1|0}\o/DCSBIOSInput{K041_POWER|SET_STATE|1|200}\o/DCSBIOSInput{NAV_POWER|SET_STATE|1|500} SwitchPanelDCSBIOSControl{0SWITCHKEY_AVIONICS_MASTER|DCS-BIOS}\o/\o/DCSBIOSInput{PPK800_INU_POWER|SET_STATE|0|0}\o/DCSBIOSInput{K041_POWER|SET_STATE|0|200}\o/DCSBIOSInput{NAV_POWER|SET_STATE|0|500} SwitchPanelLedUp{DARK|DCSBiosOutput{GEAR_NOSE_DOWN|Equals|0}} SwitchPanelLedUp{RED|DCSBiosOutput{GEAR_NOSE__UP|Equals|1}} SwitchPanelLedUp{DARK|DCSBiosOutput{GEAR_NOSE__UP|Equals|0}} SwitchPanelLedUp{GREEN|DCSBiosOutput{GEAR_NOSE_DOWN|Equals|1}} SwitchPanelLedLeft{DARK|DCSBiosOutput{GEAR_L_MAIN_DOWN|Equals|0}} SwitchPanelLedLeft{RED|DCSBiosOutput{GEAR_L_MAIN_UP|Equals|1}} SwitchPanelLedLeft{DARK|DCSBiosOutput{GEAR_L_MAIN_UP|Equals|0}} SwitchPanelLedLeft{GREEN|DCSBiosOutput{GEAR_L_MAIN_DOWN|Equals|1}} SwitchPanelLedRight{DARK|DCSBiosOutput{GEAR_R_MAIN_DOWN|Equals|0}} SwitchPanelLedRight{RED|DCSBiosOutput{GEAR_R_MAIN_UP|Equals|1}} SwitchPanelLedRight{DARK|DCSBiosOutput{GEAR_R_MAIN_UP|Equals|0}} SwitchPanelLedRight{GREEN|DCSBiosOutput{GEAR_R_MAIN_DOWN|Equals|1}} ManualLandingGearLEDs{False} EndPanel PanelType=PZ70MultiPanel PanelInstanceID=\\?\hid#vid_06a3&pid_0d06#7&33eb559b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} PanelSettingsVersion=2X BeginPanel MultiPanelDCSBIOSControl{IAS}\o/{1HDG_BUTTON|DCS-BIOS}\o/\o/DCSBIOSInput{AP_BANK_HOLD_BTN|SET_STATE|1|10} MultiPanelDCSBIOSControl{IAS}\o/{0HDG_BUTTON|DCS-BIOS}\o/\o/DCSBIOSInput{AP_BANK_HOLD_BTN|SET_STATE|1|10} MultiPanelDCSBIOSControl{ALT}\o/{1LCD_WHEEL_DEC|ALT QFE Knob dec}\o/\o/DCSBIOSInput{ALT_QFE_KNOB|VARIABLE_STEP|-200|0} MultiPanelDCSBIOSControl{ALT}\o/{1LCD_WHEEL_INC|ALT QFE Knob inc}\o/\o/DCSBIOSInput{ALT_QFE_KNOB|VARIABLE_STEP|200|0} MultiPanelDCSBIOSControl{CRS}\o/{1LCD_WHEEL_DEC|HSI_COURSE_ROT dec}\o/\o/DCSBIOSInput{HSI_COURSE_ROT|VARIABLE_STEP|-1000|0} MultiPanelDCSBIOSControl{CRS}\o/{1LCD_WHEEL_INC|HSI_COURSE_ROT inc}\o/\o/DCSBIOSInput{HSI_COURSE_ROT|VARIABLE_STEP|1000|0} MultiPanelDCSBIOSControl{CRS}\o/{0AUTO_THROTTLE|HSI_DH_DTA auto}\o/\o/DCSBIOSInput{HSI_DH_DTA_MANUAL_AUTO|SET_STATE|0|0} MultiPanelDCSBIOSControl{CRS}\o/{1AUTO_THROTTLE|HSI_DH_DTA manual}\o/\o/DCSBIOSInput{HSI_DH_DTA_MANUAL_AUTO|SET_STATE|1|0} MultiPanelDCSBIOSControlLCD{VS}\o/{LowerLCD}\o/DCSBiosOutputFormula{((VARIO_SPEED/65536)*60)-30} MultiPanelDCSBIOSControlLCD{VS}\o/{UpperLCD}\o/DCSBiosOutputFormula{Ifless ( RALT_ALT 61138 (Ifless ( RALT_ALT 54591 ( Ifless ( RALT_ALT 49420 ( Ifless ( RALT_ALT 30350 ( Ifless ( RALT_ALT 12045 (RALT_ALT/602,25) ((0,00163*(RALT_ALT-12045))+20)) ) ((0,00524*(RALT_ALT-30350))+50)) ) ((0,00967*(RALT_ALT-49420))+150)) ) ((0,01527*(RALT_ALT-54591))+200)) ) 300 ) } MultiPanelDCSBIOSControlLCD{IAS}\o/{UpperLCD}\o/DCSBiosOutputFormula{truncate((AIRSPEED*350)/65536)} MultiPanelDCSBIOSControlLCD{HDG}\o/{UpperLCD}\o/DCSBiosOutputFormula{(HSI_HDG/65536)*360} MultiPanelDCSBIOSControlLCD{ALT}\o/{UpperLCD}\o/DCSBiosOutputFormula{truncate((ALT_1000M/65536)*10000)} MultiPanelDCSBIOSControlLCD{ALT}\o/{LowerLCD}\o/DCSBiosOutputFormula{truncate(((ALT_QFE_PRESS/65536)*200)+600)} MultiPanelDCSBIOSControlLCD{CRS}\o/{UpperLCD}\o/DCSBiosOutputFormula{(HSI_DES_COURSE/65536)*360} EndPanel #-------------------------------------------------------------------- #Below are all the Virtual Keycodes in use listed. You can manually edit this file using these codes. # LBUTTON # RBUTTON # CANCEL # MBUTTON # XBUTTON1 # XBUTTON2 # BACK # TAB # CLEAR # RETURN # SHIFT # CONTROL # MENU # PAUSE # CAPITAL # KANA # HANGEUL # HANGUL # JUNJA # FINAL # HANJA # KANJI # ESCAPE # CONVERT # NONCONVERT # ACCEPT # MODECHANGE # SPACE # PRIOR # NEXT # END # HOME # LEFT # UP # RIGHT # DOWN # SELECT # PRINT # EXECUTE # SNAPSHOT # INSERT # DELETE # HELP # VK_0 # VK_1 # VK_2 # VK_3 # VK_4 # VK_5 # VK_6 # VK_7 # VK_8 # VK_9 # VK_A # VK_B # VK_C # VK_D # VK_E # VK_F # VK_G # VK_H # VK_I # VK_J # VK_K # VK_L # VK_M # VK_N # VK_O # VK_P # VK_Q # VK_R # VK_S # VK_T # VK_U # VK_V # VK_W # VK_X # VK_Y # VK_Z # LWIN # RWIN # APPS # SLEEP # NUMPAD0 # NUMPAD1 # NUMPAD2 # NUMPAD3 # NUMPAD4 # NUMPAD5 # NUMPAD6 # NUMPAD7 # NUMPAD8 # NUMPAD9 # MULTIPLY # ADD # SEPARATOR # SUBTRACT # DECIMAL # DIVIDE # F1 # F2 # F3 # F4 # F5 # F6 # F7 # F8 # F9 # F10 # F11 # F12 # F13 # F14 # F15 # F16 # F17 # F18 # F19 # F20 # F21 # F22 # F23 # F24 # NUMLOCK # SCROLL # LSHIFT # RSHIFT # LCONTROL # RCONTROL # LMENU # RMENU # BROWSER_BACK # BROWSER_FORWARD # BROWSER_REFRESH # BROWSER_STOP # BROWSER_SEARCH # BROWSER_FAVORITES # BROWSER_HOME # VOLUME_MUTE # VOLUME_DOWN # VOLUME_UP # MEDIA_NEXT_TRACK # MEDIA_PREV_TRACK # MEDIA_STOP # MEDIA_PLAY_PAUSE # LAUNCH_MAIL # LAUNCH_MEDIA_SELECT # LAUNCH_APP1 # LAUNCH_APP2 # OEM_1 # OEM_PLUS # OEM_COMMA # OEM_MINUS # OEM_PERIOD # OEM_2 # OEM_3 # OEM_4 # OEM_5 # OEM_6 # OEM_7 # OEM_8 # OEM_102 # PROCESSKEY # PACKET # ATTN # CRSEL # EXSEL # EREOF # PLAY # ZOOM # NONAME # PA1 # OEM_CLEAR Saitek_DCS_Profile.rar

Helios works with 2.5 too You can fin new profiles here: http://www.captzeen.com ..

Hello HiFly62 To get the viewports you need to copy the content of the folder "DCS Monitor Configuration" inside your game folder installation, but before, and this is important, read the next: Several versions ago ED changed some directory names, so you need to fix that, in the olders profiles: Once you extract the files in the "DCS Monitor Configuration" folder, in a temporal place, search for the directory "aircrafts", and rename that directory for "aircraft" removing the "s". Then you can copy the content of "DCS Monitor Configuration" on your game installation folder following the instructions on the package. In case you need to change the position of the viewports and size, edit the ka50_2_monitors.lua file and use your sizes and coordenates.

Ok. looks like i got everything working on the PZ70 for the KA50: - CRS Position: display with Desired Course, LCD knob with HSI_COURSE_ROT +/- , Auto Throtle switch with HSI_DH_DTA auto/manual - HDG position: display with Heading - IAS position: display with IAS - VS position: display with radar altimeter and VVI - ALT position: display Baro-Altimeter and QFE pressure, LCD knob with QFE Knob inc/dec Now a question.... Is possible to use the lights on the buttons of the panel to show the state of lamps on the cockpit? or the lights only works with the button itself? Thanks in advance. ..

Thanks a lot! i tested and work pretty well. Same resoult as: ((VARIO_SPEED/65536)*60)-30

This is my Gazelle monitor configuration for two monitors. As far as i know you can move the rwr everywhere in you viewport, just changing the coordenates. Just be sure you put the correct value in DCS options for the total resolution fo all your screens. _ = function(p) return p; end; name = _('2_monitors_SA342'); Description = 'prepared for the SA342' --TOTAL DEL VIEWPORT Viewports = { Center = { x = 0; y = 0; width = 1920; height = 1080; viewDx = 0; viewDy = 0; aspect = 16/9; } } --NADIR NADIR = { x = 1980; y = 500; width = 285; height = 156; } -- SA342_RWR SA342_RWR = { x = 2341; y = 15; width = 198; height = 198; } --SA342_TV SA342_TV = { x = 1940; y = 6; width = 382; height = 308; } --SA342_WP1 SA342_WP1 = { x = 2035; y = 451; width = 160; height = 27; } --SA342_UHF SA342_UHF = { x = 2060; y = 604; width = 100; height = 24; } --SA342_FM SA342_FM = { x = 2100; y = 387; width = 147; height = 20; } UIMainView = Viewports.Center

Hello Alex. The place for the export.lua is correct: USER NAME\Saved Games\DCS.openalpha\Scripts Dont know from where you get the captzeen export.lua but be sure you are using the latest one. You can get it from mi site: http://www.captzeen.com perhapps you are using the one in Gadrocs site, and that one is not updated to all the changes DCS make those last months. Anyway, if the export.lua fail, you can check it in DCS.log, there you get the reason why export.lua fails in case it does.

Look at DCS/Config/monitorSetup/ There are the .lua for monitors configuration. create a new one and use this code as example. You need to change the numbers for coordenates and size, to fit your resolution. _ = function(p) return p; end; name = _('2_monitors_A10C'); Description = 'Right an left MFCD on the right monitor' --MAIN GAME VIEWPORT TOTAL SIZE AN ASPECT Viewports = { Center = { x = 0; y = 0; width = 1920; height = 1080; viewDx = 0; viewDy = 0; aspect = 16/9; } } LEFT_MFCD = { x = 1921; y = 0; width = 680; height = 680; } RIGHT_MFCD = { x = 3160; y = 0; width = 680; height = 680; } UIMainView = Viewports.Center

ArturDCS, pdmarsh... Thanks a lot for your quick answers. I'll check as soon i get a bit if spare time at home.