Jump to content

Vinny002

Members
  • Posts

    581
  • Joined

  • Last visited

Everything posted by Vinny002

  1. Hi, guys! I got a feature request for the DCS world: is more countries like Hungary, Poland, Germany, ect. added into the DCS world as well as Georgia and Russia to fly to more places. Thanks! Cheers, Vincent
  2. Hi, guys! Question for you, when then the DCS world finished loading, I flew from Anapa-Vityazevo airbase to Vaziani airbase what I landed at, shut the engines down, I tuned to the tower frequency of 140.00, I requested the ground crew for more fuel (kerosene), the ground crew won't respond. Any solutions for this problem? Thanks! Cheers, Vincent
  3. Hi, guys! I rolled from graphics drivers from 340.52 to 337.88 and now the A-10C works like a charm!!! Cheers, Vincent
  4. Hi guys! Question for you, how do I figure out how many RPM (Revolutions Per Minute) the engine is turning like how many RPM in 50% RPM and 80% RPM, ect.? Thanks! Cheers, Vincent
  5. Hi, stonehouse! Yes, the engine is running, but I don't where the 34% RPM is on the engine RPM gauge, and the hydraulic pressure is around 3,000 PSI on the hydraulic pressure gauge. Cheers, Vincent
  6. Hi, guys! When I hit the LCTRL/LSHFT to close/open the airbrake, the airbrake won't move. Any ideas? Thanks! Cheers, Vincent
  7. Hi, Flagrum! Okay, got it! Thanks! Cheers, Vincent
  8. Hi, guys! I only see the F-86 Sabre forum in Russian, I don't speak any Russian, but I just bought the F-86 Sabre today, and I got a question for you, is there a DCS F-86 Sabre flight manual? Thanks! Cheers, Vincent
  9. Hi, AtaliaA1 & Bitmaster! I've been running 2 programs at the same for a long time now and I don't have any problems with it yet. @Bitmaster: the space program what I'm running while playing DCS world is the space simulator called space engine. please check out en.spaceengine.org. You'll find it interesting! Thanks! Cheers, Vincent
  10. Hi, T_A! Thanks! I'll give a try! Update: it worked! I got a question for you, how do I open the window so the ALT+TAB combination will work? Thanks! Cheers, Vincent
  11. Hi, guys! I'm not 100% sure, I'm running both the DCS world and the space simulator called space engine at the same time. I hit the windows key, it doesn't work, I hit the ALT+CTRL+DEL combination to open the task manager screen, I click on task manager to open the task bar on the bottom of the screen, I click on the running space engine icon to open the running space engine on the task bar, but if I hit the windows key while I'm running the space engine, the task bar on the bottom of the screen opens up, I click on the running DCS world icon to open the running DCS world. A several minutes later, when I hit the ALT+CTRL+DEL combination to open the task manager screen, I click on task manager, it won't open the task bar on the bottom of the screen. Any ideas? Thanks! Cheers, Vincent
  12. Hi, Sceptre! Okay, got it! Thanks! Cheers, Vincent
  13. Hi, NeilWillis! I couldn't get a track because the keyboard/mouse stopped responding when the DCS A-10C froze or the screen went blank were the keyboard/mouse stopped responding, sorry. Here is my computer specs: OS: Windows 7 Home premium 64 bit CPU: i5 quad core 3.2 GHZ RAM: 8 GB Hard drive: 1 TB Graphics card: GTX 550ti 2GB of video RAM
  14. Hi, guys! I got the feature request for the P-51: is the fire truck, or the tow truck to get the P-51 upright in case the P-51 nose over and flip upside down if landing goes wrong. Please see attached to see the p-51 flipped over when landing went wrong. Thanks! Cheers, Vincent
  15. Hi, guys! I ran the A-10C this afternoon, after dinner when I was powering up the A-10C, the screen went blank for about a second, a few minutes later the screen went blank again when I was taxiing to the runway. I took off, flew the A-10C a little bit, landed the A-10C. Everything went well while I was flying, landing and taxiing the A-10C after once I get back on the ground. Then about a couple of hours later, when I came back, the screen didn't go blank but the program froze with no response from the keyboard and mouse, I had to restart the computer by holding the power button down for a few seconds until the computer shut down, I wait for 10 seconds, and then I turn the computer back on. Any solutions to this problem? Thanks! Cheers, Vincent
  16. Hi, Sceptre! No, I wasn't in the startup tutorial. The left of the starter is oil dilute switch. Thanks! I'll try the oil dilute switch to the left of the starter switch for a few seconds after I prime the engine and let see what happens! Cheers, Vincent
  17. Hi, guys! Here is the track about the P-51 engine won't start. Please see attached. I don't know how to attach the .trk file attachment onto this forum. When I try to upload the .trk file I got a upload error message saying invalid file. What now? Thanks! Cheers, Vincent
  18. Hi, Tango! I can't wait until I try out your module regarding complete system simulation! I really enjoy flipping switches and punching buttons!!! How is it coming along? Thanks! Cheers, Vincent
  19. Hi, guys! I don't know if I post this in the right place or not but I got a problem with DCS A-10C. I bought the DCS A-10C the other day. The DCS A-10C runs great until yesterday late afternoon, the screen went blank but the sound is in the background. I did the windows update, update the Nvidia graphics, I ran the DCS A-10C again, about 1 hour later still the same problem, right now I'm running the DCS P-51 for 10 hours now the DCS P-51 still runs great with no blank screen. Any ideas? Thanks! Cheers, Vincent
  20. Hi, guys! I bought the A-10C yesterday. I looked at the keyboard command list but I cannot seem to find the keys commands for the aileron, rudder, and elevator trims. Any help would be greatly appreciated! Thanks! Cheers, Vincent
  21. Hi, guys! I'm not 100% sure, is there a way to get the aileron, rudder, and elevator trims to work when I'm using the game flight checked in the gameplay tab of the options on the right hand side of the screen in the DCS startup screen? The aileron, elevator, and the rudder trim wheels work even with the game flight checked. Thanks! Cheers, Vincent
  22. Hi, VincentLaw! That makes sense! Thanks for the explanation! Cheers, Vincent
  23. Hi, guys! Question for you, is it normal for the P-51 to bounce when the P-51 touchdown & what is a three point landing? Thanks! Cheers, Vincent
  24. Hi, guys! Question for you, is the P-51 mustang engine startup bug is fixed in DCS 1.29? Thanks! Cheers, Vincent
  25. Hi, guys! I really like the mig-29!
×
×
  • Create New...