LynxDK

Again a Little Picture of what we are currently working on. This is the first engraved prototype, and we know that the + , - and STEER in the left need to go more left. Also the arrows above and under PG isnt high enough. The buttons and aluminum casing are also on the way, hopefully i can show you the essembled model very soon.

Looking nice :) Keep up the good work

We are in the Progress of making panels. you can see my thread about it here: http://forums.eagle.ru/showthread.php?t=137484 We are atm working on a UFC, but when that is done, we start design on the Side panels. We can also make you custom panels if you like, we dont charge Money for the design of new panels. Best Regards.

Would there be any interest in this type: Let me know, because if there is, we can make a production of that.

Another Little update. Here is a couple of Pictures of the first prototype of the Ext. Store Jettison panel housing. Here its in blue because its a prototype, it will eventually be printed in Black and painted Black also. With a Backlit panel inside the housing with the Switch guard and switch.

JK03: Switch Tops Hand turned aluminum switch tops, made so they can easily be glued on top of normal on/off and on/off/on switches. Made with 6mm holes for normal switches. These are replicas of the Cutler Hammer/Eaton. Note that since they are hand turned, there can be tiny variations in the shape of the head. When mounted its not noticable, but it can be when you have them lying side by side. However, if you order fx. 10, i will sort them so you get 10 pcs. who all look alike. You can buy them from my webshop, here: http://lynx.dk/product/cutler-hammereaton-replica/ INFO On Number Of JK03 Switches For Specific Planes: A-10C: 5 Pcs. F-16 Block 52: 1 Pc.

JK02: Switch Tops Hand turned aluminum switch tops, made so they can easily be glued on top of normal on/off and on/off/on switches. Made with 6mm holes for normal switches. These are replicas of the Honeywell 2TL1. Note that since they are hand turned, there can be tiny variations in the shape of the head. When mounted its not noticable, but it can be when you have them lying side by side. However, if you order fx. 10, i will sort them so you get 10 pcs. who all look alike. You can buy them from my webshop, here: http://lynx.dk/product/honeywell-2tl1-switch-top-replica/ INFO On Number Of JK02 Switches For Specific Planes: A-10C: 16 Pcs. F-16 Block 52: 23 Pcs.

Except, they dont look like the real deal :) Anyway, we are making them for our Cockpits, so if anyone would be interested, we can easily make more :) So more pics of that will come when we get the real screws, and bolts.

Agreed :) Aint saying its better, but its cheaper and you dont have to paint.

Yea, you are right... But the reasonable priced at still pretty high... I belive i can make them cheaper... something like 0,30 US Dollers. with screws... and u dont need to paint. I might be wrong tho....

The Lettering has been sorted out, so its the real Font now. Here is a Little pic of the DZUS'es we are working on. They are going to be real cheap. And atm im looking for the right Screws. Im hoping to find both Bolts and Screws, so everyone can use them. Painted Black of course.

Here is a Little headsup on a prototype External Store Jettison switch protection, with or without switch. Its not quite finished, it need to be curved at the buttom at the inside of the protector. it measures 30mm in Width, and 18mm in height. Its designed to bed lowered into the panel it sit upon, by 5-6 mm, im not suite sure if the height is right, let me know what you think, and or if anyone know the real height, would be helpfull. Its turned out of a single piece of Aluminum, and Pictures of the curved buttom will be here soon.

Thats one of the best quality videos i have seen so far. Really cool. Thx for that :) Best Regards

Glad i could help. And the one without paint is accually half price of what i linked you.

Hey Hans. Check this link: https://eshop.silvan.dk/vare/hvid-traefiberplade-2 They Are incredible easy to work with, i rebuilded The entire interior of my caravan with these. Easy to bend and easy to cut.. And you Can get a cheaper version which isnt painted. And If you dont wanna use screws, you Can easily glue Them with "no more nails" they just needs to be kept in place While it dries. If u want pictures i Can send later, cuz atm im at holiday, in that Exact caravan

Thank you :) Im working on the design for the Oxygen Switches.... And i think i have to make them for the small switches, with 3mm top, since the originals are very thin headed, and the 6mm from normal switches are too big. I will post Pictures when i have done some tests.

And the promised Picture of the Manual Reversion Prototype

More Prototype Pictures, comming soon: Landing Light Replica, 3D printed with Steel Balls, The final version will be Silver colored in stead of Grey: And Pilot Heat Replica, 3D Printed with Stainles Steel Screw: Manual Reversion is also on the way, so is the Oxygen Panel Switches, Pictures comming soon.

We are talking months, since we have real life and Work beside this project :) But i hope to realease some Pictures soon.

Hey Ragtop. As HMA Mentioned, we are currently working on a UFC.. I cant say anything atm, as its in the Development face.

Hello, please see the For sale section: http://forums.eagle.ru/showthread.php?t=138416 Prices will soon be updates, when we get the 2 new switches ready for sale. But the Price will be higher on the new switches, due to longer manufactor times. And yes, i will ship World Wide :)

Here is a Little Update: These will be ready soon: 1TL1 Replica Tops: And Cutler-Hammer Replica Tops:

That looks really good, Keep it up :)

It is true that specially the Gauge Rings have a Little glossy effect at them, but that will just be even worse if i vapor treatet them. Note that since we have taking high resolution Pictures, in outside sun light, and close up Pictures, the lines in the prints are very very easy to see. But when you put them 50-60cm away from you, like when you sit in the cockpit... you practically cant see them, it is only 0,15mm lines. And another thing is, that the lighting in the cockpit when you play, probably isnt direct sunlight :) That of course dosnt change the fact that they are visible when you look at it close, and yes we could do something about it, but Again takes time which Means more Money. I have tryed to do it as cheap as possible, and ended up with this look, since they are hard to see at distance, and the Price for one guage ring as they are now, is 1,30$. Its pretty easy for anyone who wanna purchase them, to do whatever finish they would like. It took me aprox. 1 hour to paint the top of the gauges red, green and yellow. The final product wont be painted either, Again, to save you Guys Money. I will however provide a schematic guide, so that everyone can paint them, to they fit the gauges in Helios, like i did. And the panel is going to be shipped with Loose gauge rings, and light, so the buyer has the choose to install LED's if he want, and can paint the rings, before attaching them to the panel. If people want to pay for it, then of course we can surface treat and paint them. Maybe as another option?. I am working on the Front plate where all the gauges are to be mounted, so as soon thats done i will post Pictures with Helios running behind.

A Little more info: The Gauge Rings and Light are printet in 0,15mm layers, and are also gonna be available seperately, for those who wanna make the panel themself, and just want some accesories. The AHCP Panel are we still working on the background installation, so it looks just right. And that panel will be available as DIY kits, but also as a complete pack. So you can choose to buy the panel alone, with or without Aluminum Backplate. And with the possibility for choosing an allready assembled backlight module, or the DIY backlight KIT, where you get the PCB and the component, that you have to solder yourself. This way people can choose for themself how much they want to spent, and how much "DIY" they want. Right now we are talking about selling them in packs like this, the AHCP as an examble: AHCP Panel: Painted and engraved Acrylic, with screws for Mount. Backlight ready. AHCP Panel Backplate: Painted Aluminum, With Screws for Mounting. AHCP Backlight Pack: Pre Soldered PCB board, with screws for mounting. AHCP Backlight DIY Kit: Precut PCB Board, with all components and screws for mounting. This panel have to be soldered together. AHCP DIY Switch Tops: Switch tops to be glued on top of normal toggle switches, to make them look like original switches. Later on we plan on Selling Switches, with and without Switch Tops. And Arduino DIY Kits, to use with Helios and DCS-BIOS. I know you are still waiting for prices, but as we dont have a complete finished product ready, i cant tell you precise. Alltho, we are doing everything we can to keep prices low, so everyone can affort it. As soon as we have prices i will post it. Tell me what you Guys think.