Jump to content

Aluminum Donkey

Members
  • Posts

    1135
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Aluminum Donkey

  1. Have you ever tried using Nvidia Profile Inspector to try enabling DLSS without DLAA being applied? NVPI has a whole metic buttload of different options for configuring the graphics driver, much more than what you can get from NVCP. AD
  2. This happens with DLSS for me but not when I only use DLAA. To make it go away, force DLAA Preset K. It eats a little bit of performance but looks REALLY good! AD
  3. You're probably right, DLSS is awesome for everything but DCS. I find that with DLAA only it's much better than MSAA though, which is pretty crappy in DCS. I don't like DLSS with it though, only DLAA by itself. With the DLSS preset K though, DLSS is still pretty impressive and takes a load off the graphics card. I just prefer it with DLAA only because it gives less artifacting. AD
  4. Yeah, my stuttering seems to have mostly gone away. Maybe it was a monitor sync problem, I have an old monitor that is not listed as G-Sync Compatible (but it works) and is 8 years old. It's working well now, also I seem to have better luck overall with ReBAR turned off in BIOS. I still can't get my low-altitude FPS up as high as I used to with a fresh graphics driver install, though. No idea why. First time I run the sim it's awesome, next time I have problems with low FPS sometimes, but it's only when flying low near the Eiffel Tower in Normandy 2.0. AD
  5. Ok, in my case I always have to have some kind of vertical sync enabled or I always get screen tearing even if I set my game FPS to the monitor's refresh rate (75 Hz for me.) Normal Vsync seems to cause a lot of stuttering in DCS. It could be the sim itself, or it could be a problem with the Nvidia driver causing monitor sync issues. I don't know. I just recently figured out though that if I use Fast Sync instead of Vsync and limit the FPS in-game to the monitor's max refresh (75 FPS) then I get much smoother motion without stutter and Fast Sync eliminates screen tearing, which I will always get without any kind of vertical sync enabled. Maybe I'll try limiting FPS in the NVCP instead of in DCS itself just to see what happens, but it already works well with the framerate set in DCS. AD
  6. If I enable G-Sync compatible with no vertical sync, I get tearing. I have to use some kind of vertical sync. Fast Sync seems to work best for me, Vsync causes stuttering and BS but Fast Sync works well if I set the framerate in the Settings menu with the slider.
  7. Yes, I can run G-Sync Compatible mode with my Omen 32" monitor. I'm now using Fast Sync instead of Vsync though, and set the framerate in the Settings menu with the slider. It just about eliminates stuttering for me. Fast Sync is needed to eliminate screen tearing, it works well. AD I'm finding that too, except I use variable refresh (Freesync enabled in monitor, G-Sync ON in NVCP.) Using normal Vsync causes stuttering for me. AD
  8. Are you using Vsync, either in-sim or in the driver? Turn it off and use Fast Sync in the graphics driver (NVCP) instead, it eliminates screen tearing. Then set the framerate you want in-sim using the slider in the Settings menu. Greatly reduced (just about eliminated) stutters for me. DCS doesn't seem to like Vsync very much. AD
  9. Ok, I set my pagefile to 32768 MB as per recommendations. I also found that DCS runs much smoother if I don't use Vsync either in the sim or in NVCP. Instead, I turn Vsync off in the sim and use Fast Sync in NVCP, then set the framerate I want (75 Hz for my HP Omen 32" monitor) in the sim using the slider. Runs MUCH smoother now. For whatever reason, DCS doesn't seem to like Vsync very much. Fast Sync is much better. AD
  10. Greetings everyone, I recently tried disabling Vsync in the sim and enabled Fast Sync in NVCP. It seems to have largely eliminated my stuttering problem. Using normal Vsync either in-sim or in NVCP doesn't seem to work so well. I have to limit the framerate in-sim using the Max FPS slider (I set it to 75 FPS, which is my monitor's max) and then I use Fast Sync in NVCP. Problem mostly solved! Only thing is, I still get FPS drops when flying under the Eiffel Tower in Normandy 2.0. I had the sim going for a while without it, I could just fly under the tower and it ran a solid 75 FPS. Now it drops down to maybe 62 or so. I wish it wouldn't do that... Anyway, at least I have a handle on it. I wonder if the problem is with my monitor. I have an Nvidia graphics card and a Freesync monitor, but my monitor is about 8 years old and is not G-Sync Compatible--just normal "cheap" Freesync and not Freesync Premium or Premium Pro (my monitor is an HP Omen 32".) That might have something to do with it. I'll keep messing around with settings and see what happens. Mostly, turning off VSync seems to have helped a lot. I just use Fast Sync now because with no sync at all, I get screen tearing even when running the sim at exactly the same framerate as my monitor's refresh rate (75 Hz.) If you're having problems with this, try it yourself--it very well might be a monitor sync issue. AD
  11. I don't have problems with crashes. Can't remember the last time DCS crashed to desktop. As for my 16 GB graphics card, I run a single 2560 x 1440 display and 16 GB seems plenty. I rarely use more than 10-12 GB at max, most games barely use 6 to 8. AD
  12. I've tried all that, and my DCS missions don't use all 32 GB anyway. I also have 16 GB on the graphics card and usually only about 10 GB gets used, sometimes maybe ~12. Besides, I've had it running great on my current system. No idea why I sometimes get it to run perfectly after an update, only to have it start stuttering and giving lower framerates the next time I run the sim. My GAWD what a nuisance. At least they fixed the bug that gave dreadfully long mission loading times. AD
  13. I've never been able to make arses or teakettles of the dcs.log, but here goes: Thanks for any insights! AD dcs.log
  14. Well, I ran the sim again last night and while the loading times are still much better, the stuttering is back again and framerates are starting to drop again. Pardon my French, but <profanity> IT. It's been like this forever. It was running great, and now it's back to a stuttery mess with framerate drops. Oh well, to hell with it. AD
  15. Yeah, I had great results flying the latest version today! I don't have the balls to try it again in case it starts stuttering again and framerates suck. I've had it happen before. Just glad it ran really nicely for the first time in months. AD EDIT: Oh yeah, loading times are a heck of a lot better now too!
  16. Yeah, I also have Realtek sound (ALC1200) and while the sound itself always works perfectly for me, disabling solved my problems with stuttering and low framerates. Problem is, it came back again even with the sound driver disabled! So I just turned it back on. I can't sort out whether it's DCS, Windows, or crappy device drivers somewhere. This really bites. I've lost interest in DCS for the time being, maybe they'll fix it one day. AD
  17. Event Viewer logs? I have never in many years over many different systems ever been able to run a Windows install that doesn't accumulate massive numbers of warnings and errors in the Event Viewer. It doesn't matter if it's a fresh install of Windows using all the latest drivers and known-good hardware. First day of running, Event Viewer is chock-full of errors and warnings upon errors and warnings. Doesn't matter which version of Windows it is, doesn't matter what hardware it's running on. I ignore it now because it's ridiculous. Windows is a broken mess and always has been, when software becomes that overwhelmingly complex it is impossible to get everything running properly. Windows 7 was half decent though. AD
  18. Also, while resetting Windows 11 helped a lot, after flying a few missions I'm starting to get stuttering again. It f@cking sucks, I just wanna play the darn sim! Since I started playing DCS in about 2008 I've spent more time porking around with it for performance reasons instead of really getting into the game and enjoying it. I get really tired of this. AD
  19. I tried reverting to older version of DCS and it made no difference in the sim's framerate and smoothness, the only improvement was in loading times. 2.9.15 does have problems with loading times. The only fix for sim performance for me was reinstalling (Reset) Windows 11. Long loading times are still a bit of an issue, but much better now with a freshly reset OS. Some people have beastly computers and are still having this problem. An OS reset might be the solution. Windows is kinda 'broken' and needs to be reset/reinstalled every now and then, maybe once a year or even more often if you're really picky about performance. My computer isn't God-tier but it's pretty good. Some people have a Ryzen 10900X3D with 128GB of 20 GHz DDR5 and a pair of RTX 5090s and still have crappy performance and long loading times. I think it's a Windows problem and not just DCS, they need a Windows reinstall. Windows has been that way forever. I have no idea why. AD
  20. Nightstorm, I had the same problem with long loading times and crappy performance. Reverting to older versions of DCS didn't help, neither did trying older graphics drivers, uninstalling the latest Windows 11 updates, or messing around with numerous system settings. The only thing that fixed it for me was to Reset my PC. I reinstalled Win11 and got everything going great again! Nice and smooth running simulator now. No audio problems either. It just seems to me that Windows needs reinstalling every now and then, possibly once a year or maybe even more. I'm running the latest version of DCS (2.9.15.9599) with Nvidia driver 576.15 and all is well so far! AD
  21. Unfortunately I can't play DCS right now! I turned off the HPET to see if it helped, now DCS stubbornly refuses to load and run any missions. It gets hung up on the loading screen. I re-enabled HPET but it didn't fix it. I also reverted to an older version of DCS (2.9.14.8394) and it isn't helping either! I can't load or fly any missions! Oh, bun of a sitch. What a nuisance. AD
  22. I wish I knew how to pick a sound device that doesn't load the CPU too much (or at all.) I don't know what to look for. Sound card? USB external converter? Optical cable instead of USB? Any ideas? AD
  23. I've never had issues with audio crackling or cutting out. Never a problem at all. But the graphics stutter was definitely caused by the audio driver! Replacing the audio driver with the newest one from my motherboard manufacturer (Gigabyte) fixed it 99%. The only 100% cure is to disable Realtek Audio in Device Manager, then the sim is 100% glassy smooth even with all max graphics settings, lots of units in flight, lots of explosions/burning wreckage etc. even in big furballs over Paris in Normandy 2.0! I wonder if a sound card would completely fix it. (Or maybe make it worse!) Dang, I haven't owned a sound card in decades! AD
  24. I hadn't played DCS for a while and had installed all the latest DCS updates, Windows 11 updates, and latest graphics driver (576.15) and the next time I ran DCS it was a stuttery mess and nothing would fix it--rolling back to earlier version of DCS, older graphics drivers, remove Win11 updates etc. Nothing helped. On a whim I tried disabling stuff and the one magic cure was disabling audio. With no sound the sim ran PERFECTLY. Loading times were a lot better too! The whole sim just felt snappier and responsive with ZERO stutter and hesitation (except for sending orders to wingmen, which always causes a very tiny stutter--it's a problem with DCS itself.) So, wiping out the Realtek audio driver and replacing it with the latest one just about fixed it! Loading times rock now, the sim runs nice and smooth too. Only thing that makes it run even better (close to 100% stutter-free) is disabling audio. I'm on the right track and DCS is playable again! AD
  25. Greetings, I have found it impossible to run DCS 2.9.15.9599 smoothly, the sim speed seems to crawl up and down periodically. It's not a "stutter" in the usual sense, the sim speeds up and slows down as I roll or turn the aircraft. The horizon tilts at varying speed. I tried different graphics drivers, remove Windows 11 updates etc. but the only thing that completely stops it and allows the sim to run perfectly smoothly is by disabling my Realtek audio device in Device Manager. It even improves loading times! With no audio, the sim runs perfectly smoothly! Anyone have any ideas how to approach solving this? I tried the latest audio driver, I'm flying now to see if it helps. AD EDIT: Deleting the Realtek audio driver and replacing it with the newest one seems to have greatly improved it! DCS still runs smoother with audio disabled in Device Manager, but it's much better now! I have an ancient PCI sound card kicking around, maybe I could try it. It's an old ass card but it's compatible with my system if I can find a driver for it. It even has a Game Port!
×
×
  • Create New...