Fishbed-21

Great to know, i've asked to know, if i'm on A/A with my centerline tank and i pull 7G i will lose it or not

That was i want to know

Yeah but with "Charges" fbw modality the plane will limit the G and max AoA. If i bring with me 6 Mk82, switch to A/A isnt the best thing. For example in the leatherneck's MiG-21 if you pull up over 5G with bombs/tank you will lose them.

This is how should it work

Adding in sequence two waypoint has caused this "bug" This isn't a waypoint overlap, the numbers are not the L/G coordinates of the previous waypoint

Then i can switch to A/A Mode on FBW Config also with the empty centerline tank attached?

Hi pilots, i was trying a simple navigation flight with the Mirage 2000C just for get more practiced on the INS wpt's management. My payload was a 2x R.550 Magic 2, 2x Super 530D and a centerline fuel tank. When i was in mid air my master caution goes yellow and on my Warning Advisory Panel the CONF light turns on. Just like how it happens after the drop of external fuel tank. But in this case the fuel tank was still attached. (On the picture see the fuel indicator DETOT and the Warning Advisory Panel)

No kind of A-G radar designation for cannon. Cannons in A-G mode are working with the RS (Radio Sonde) on the PCA not with the TAS (Telemetrie Air-Sol)

I confirm it. Same thing. I press Refly and it crash

Glad i helped you!

Agree! I'm getting crazy to make it works correctly. Some time it responds, sometimes no, sometimes it lase sometimes no.

+1

Ok I'm not complaining about this. My question is: It is possible to allow the wingman attacking a JTAC's designated target? (after the talk between wingleader and JTAC)

You can't lock a ground target with the "radar lock button"(Enter). You need to use the command "Magic Slave/AG Designate/INS Update" for start a CCRP run. (Remeber to put the radar on TAS)

Yes we was in the same group. This is the trick? I've simply thought how a single JTAC can handle 2 aircrafts asking for targets at the same time. Then how the JTAC will provide priority to a client instead of another? That's working? I mean 2 clients in 2 differents groups?

Hello pilots, I was training a bit with a friend in an online mission: 2x Mirage 2000C Enfield 1-1,1-2 1x Ai JTAC (HMMW TOW) Whiplash 1-1 (140.00MHz) And enemy BTR-80. Now I will explain what happens, only the wingleader (Enfield 1-1) can communicate successfully with the JTAC, the other doesn't have any answer by him. We checked the radio frequency, if the radio was in Manual mode and so on. Everything was ok. Then we changed role (I was 1-1). Same as before, only the leader can communicate with JTAC. My answer is: this is normal? This is related to the datalink switch in the JTAC's Enroute task? This is a bug? Thanks for any help provided!

Ok thanks for the clarification!

Ok then the frequencies range for the V/UHF is 118.00 to 143.90 & 146.00 to 400.00 right? Great job on this file! Really useful!

According to chuck's guide of the Mirage 2000C: - V/UHF COM1 radio is used for communications between 118 and 400 MHz. - UHF COM2 radio is used for communications between 225 and 400 Hz. Then the "true" radio coverage is 118.00 to 143.90 for V/UHF (main) and 225.00 - 399.90 for the UHF (aux)?

Hi pilots, Today I was trying some JTAC/buddy lasing with the M2K-C. In the mission editor I've assigned to the JTAC the frequency 145.00MHz in AM. Once in the cockpit and in flight I've tried to enter this frequency in the UVHF radio. (Using the Manual mode, not preset) but the problem is that the all frequencies between 145.00 and 144.00 are "showed" as 225.00 in the led indicator (and they doesn't work I.e. Cannot communicate) Now my question is, does those frequencies are "reserved" or something like that ? Or is a bug? Thanks in advance for any help provided! And for devs: continue your great job with this module!

Id i remember correctly is LeftCtrl+3

Ok good, thanks for explaining! Inviato dal mio iPhone utilizzando Tapatalk

My question is: Does TAS or RS affects also cannons for AG? If i remember correctly for use cannons in AG you should select the AG pipper (CCLT or PRED in the HUD controls panel) The CCLT should be like a continuos calculated solution for shooting, meanwhil the PRED should be for AA. Does it is correct?

Nope i'll give a try as soon as possible :thumbup:

The radar altimeter for calculate the distance to ground shouldn't be the RS mode on PCA? The CAS is for use cannons on ground if I'm not wrong.