iVVChewy9141VVi

NVM For a 8700K and 1070 a 450 is more then enough i put a 1080 which even though thats fine. Trust me been building computers for the last 20 years

There is no need for more the 450 watt. People over estimate i i just built a i7 8700K and 1080ti on 500 watt quality PSU Max power draw based on all the Specs is 330 watts at full usage which gaming does not I know more is better i actually dropped down to a 1070 ti you can use any 8th gen K cpu without OC and a single card setup with 450 watt if you go with a nvidia gpu.

Well finally got my CPU and GPU getting ready for the 20(F)18 build. Build Listed Below Fractal Design Core 500 Intel i7 8700K Asus Z370-I Strix Corsair Vengeance 8GBx2 (Will upgrade down the road to 32 GB) Asus GTX 1070 Strix Samsung 960 Evo M.2 500GB for OS Corsair SF450 Currently i might do my games on a 12 TB HDD by seagate (Barracuda pro) This will help with storage and gaming The Core 500 is a tiny Mini ITX box which has a lot of cooling options. Anyone here not more there user files off there SSD? Also 450 watt is more then enough for a 1080 and 8700K without the OC

With the prices so high and my 980 took a hit for the worst and out of warranty. Would i 1060 be a viable option for 1080P 60hz. Until either 20xx series comes out or prices drop somewhat

Just started wiring the Switches/Buttons and Pot setup. Now my question is i am looking to have a Gear UP Red LED and Gear Down Green LED on the switch. I see they are wired to the 5V and need a resistor. Are there any LED that you could recommend that dont need a resistor that are built into the LED? Also how would you wire that? I see how to wire the toggle on led?

Sorry for late reply Are you able to hook up 2 way toggles to the board? On there website they only show on off are you able to do on off on

Have a few questions

I currently want to get the CH Products setup i head the manager does not work with windows 10 but everything else works fine. Anyone here have the CH Products Fighterstick, Pro Throttle and rudder pedals?

if i build using terminal blocks i would have to use the below psu correct? https://www.amazon.com/Mean-NES-100-.../dp/B00K57NCP8 Also it says is a 5V psu does that mean any LED would work without resister if its rated at 5v

Will that power adapter and power supply cable work with a Terminal Block that is connected to say 15 small 5mm led?

romeokilo Do you use a Mean Well PSU and connect them to terminal blocks to power led?

I cant wait for 2.5 either but also the SOH. I have been big on the Hornet in FSX mostly the VRS f-18e. Can't wait for Legacy Horney

What are you excited about in 2018?

With my last question about the 1070 i ended up getting the 1080 and the i7 8700K now im wondering how is the rift is it worth it will i be happy with these specs

Could i use this for 5v (5mm) LED https://www.amazon.com/dp/B01D8ER6S8/ref=asc_df_B01D8ER6Q05328541/?tag=hyprod-20&creative=395033&creativeASIN=B01D8ER6Q0&linkCode=df0&hvadid=186575759958&hvpos=1o1&hvnetw=g&hvrand=9215811397672171024&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9004518&hvtargid=pla-303273230318&th=1 Was going to use about maybe 10-15 led 20 max Just need help with picking the LED for that.

Anyone have ideas how i would do that. Would i need something like this? https://www.amazon.com/Mean-NES-100-5-Power-Supply-Signs/dp/B00K57NCP8

Thanks . I just want to make sure i dont make one and someone tries to make one to and gives me crap

I am looking into making the Virtual VMFA-115 but i always worry about people claiming it after i already started. How do i stop this. Nobody currently has it and really want to start it up

How will the Gigabyte GTX 1070 Aorus Run games like DCS with the Rift?

Recently purchased the BU0836X with all the LED i need to use for my creation i have to look into using a PSU with a Terminal Block. Has anyone did this? Or have anyplace to help me do this? Are there ways or terminal blocks that can use a wall plug to power the terminal block?

The 5-30% will also effect AMD because when they patch this it a patch across the board even if AMD is not effected. AMD might not be effected via the security problem but they will be effected with the performance hits when the patch comes out because the patch won't say oh this is for intel only. Also on OCN they have some test that show 8700K only seeing 5% hit. Also https://www.phoronix.com/scan.php?page=news_item&px=x86-PTI-Initial-Gaming-Tests Did some tests even though its only on linux

Part broke in my car :( I am waiting to get the 8700K now i have to put it on hold till the end of the month :(

Does Joy2Key allow me to have more say 3 (32 button) Button boxes

Thanks Jocko that helped alot i didnt know Xpadder can do toggle off commands Guess that was a older version that didnt have a press button on release?

Hello Community, I currently have been looking into creating a Button Box setup for DCS. I have recently looked online and found that SVMapper would be the best for my setup but i have one concern. I have read online that there is a device limit of how many i can connect as a game device. Currently i have 4 things that i use for DCS World. Track IR 5 CH Products Fighterstick CH Products Pro Throttle CH Products Rudder Pedals Does this mean SVMapper will not work for me when i create my button boxes? I am sorry for all the post im on the Excited / worried side of creating proper buttons and toggles. I really dont want to get into the LUA files. But i heard SVMapper is go to have when using a On-Off toggle to create a action on toggle and action on toggle off.