VampireOne

I find it difficult with the paint package. The file blows up to 15 GB When I am Working on it in GIMP and impossible to work with. Sent from my iPhone using Tapatalk

V905 No I Will probably start off with your design and develop from there If needed. Sent from my iPhone using Tapatalk

Hello Volker Yes what you told me is what I have been able to “spy” from your videos. ;) Have also found the servos and the bladders online. So no need to go hunting for the specs. Many years ago (1988) I worked briefly at an operational F16 simulator and this sim was equipped with a similar setup as it was a fixed base sim. I am trying to evaluate your setup versus a 3DOF motion cueing system when used with VR. True Gs can not be simulated on our budget (and thank god for that. More than 7 g REALLY is uncomfortable. Believe me. I have had more than 9) But what it will do is to allow us to fly literally by the seat of our pants. And thanks to “Tüftlers“ like you it will me accessible to the masses, like me. Thank you for the hard work..... Sent from my iPhone using Tapatalk

Thx will try that as it is somewhat annoying Sent from my iPhone using Tapatalk

This May have been discussed before but why does the menu pop up at seemingly random times? Sent from my iPhone using Tapatalk

Hello Volker.. Impressive setup. So, if I understand it correctly, you have two sets of bladders: One under the jetseat to lift and lower the player and a set of "container bladders" which are pumped from the start and via the servos pump the air to the corresponding bladders under the seat? Do you then pump up the container bladders with the attached hand pumps first? Would you mind sharing the specs of the servos and also where you got them? I found the bladders.. pretty cool idea... The servos seem to be somewhat noisy, but I guess once you have a headset on it does not matter. I could imagine a combination of building a ACES seat where the bladders, tubing and wiring is hidden and the servos enclosed would make for a very VERY cool setup and also tone down the servo noise somewhat.

Could you provide some more detailed information along with a materials list ?? Sent from my iPhone using Tapatalk

Joey. What kind of FUEL Do you normally take off with? At air shows the fuel is normally kept at a minimum Sent from my iPhone using Tapatalk

Outstanding Sent from my iPhone using Tapatalk

Yes. Most definately interested in plans, materielle lists etc. And the video of course Sent from my iPhone using Tapatalk

Not published yet.. Sent from my iPhone using Tapatalk

@Vibora: I May come across somewhat critical but let me tell you that I am very happy with this module. It grows on you the more you fly it. As mentioned earlier I use it for a virtual Jet Pilot Training program to teach the basics (even to “experienced” dcs pilots) As We includ As many IRL procedures As possible. The aim is to make Good and disciplined virtual pilots who are able to fly and fight with the best and most serious groups out there. The 101 is a wonderful platform for that! Keep up the good work. If you are looking for additional testers send me a PM. I am also a beta tester for another developer. Sent from my iPhone using Tapatalk

Excellent. Thank you. Sent from my iPhone using Tapatalk

Okay. That is good enough. But how do you swap controls ?? Sent from my iPhone using Tapatalk

And When Will it be possible to Do this in multi player mode with shared cockpit? Sent from my iPhone using Tapatalk

Away atm. How does it work? Sent from my iPhone using Tapatalk

Dual control funktionality is High on the wish list for training purposes. The 101 really grows on you. As I mentioned previously I am building a vUPT training program modelled on the training I went through many years ago with the USAF and being able to demo and evaluate real time is invaluable. Sent from my iPhone using Tapatalk

Hi Vibora. I am using the C101 as the basic jet trainer for the vUPT at the vRDAF. To this end, I am also publishing some SOPs and flight procedures for students to look at before flights. I do need some information which I did not come across in the manual, such as entry speeds and G loads for various aerobatic maneuvers. Would you happen to have them? Either here or you can PM me.

Whoa. Cannot wait to See the finished stl files Sent from my iPhone using Tapatalk

Awesome Job John .... i have finally assembled my Prusa printer and am in the process of trying out its capabilities. Sent from my iPhone using Tapatalk

Okay. Thanks Sent from my iPhone using Tapatalk

Mypedals have stopped working...... Windows does not recognise them anymore.... switched usb port. no joy.....

This has probably been asked before but is it possible to move the kneeboard Down to the “knee” position for us VR types? Sent from my iPhone using Tapatalk

I am almost finished assembling my Prusa MK3 and cannot wait to start printing. Sent from my iPhone using Tapatalk

Ahhhh. Finally. I am having the same problems and it is giving me grey hair... thank you. Now I know that it i a bug...