laldren1983

Thanks pal~~~

Today is January 5, 2025, so far, after testing, this mod is working normally (DCS version 2.9.11.4686, but must be installed using OvGME), but here are some known issues, hopefully will be fixed soon: 1.AAR does not transmit fuel after successful contact (no "contact" sound is heard on the radio) 2. The anti-radiation missile (identified as LD-10) will automatically explode three seconds after launch 3. There are two types of rockets, one of which will stay in the air for a long time like a missile, or even level off

I'm more accustomed to seeing speed displayed in "km/h"(not "knot") and altitude in "m"(not "ft") on the HUD. Is there any way to achieve this？ For instance, on aircraft like the F18、F16 or JF-17

I enjoy playing DCS with my friends online, and I need to communicate with them via radio. If I want to set up my own SRS server, what should I do? I did it this way, I established a DCS server through an internal network penetration method (because I didn't have a public IP address and couldn't establish a server directly), and my friend joined my server through the IP address. Then I ran SRS first, and filled in the server IP in the connection server as "127.0.0.1". At this time, I could see that SRS was working normally, and the first three connection plug-ins had turned green. Then, I ran "DCS-SRS Server.exe", and let my friend connect to my SRS using the IP address of the server I had established, but it didn't work, and he couldn't connect. The SRS list always only had me. Did I do something wrong? How can I establish my own SRS server without a public IP address?

NEED HELP why no keyword confidence level displaying when I am in training mode ? No matter how much I say the key words out loud

Not the correct forum for this, but you should install simconnect client (google it as I cannot find a link now). Could you tell me the name of this “client” software? What keywords should I search for?

Doesn't HF8 support MSFS? Why does an X appear in the status bar

yes , it works!!Thanks pal thanks !!

I just received the HF8 I bought online My HF8 does not vibrate in DCS, when I open SSA software, the following window pops up.... and when I open UWVeditor , the following window pops up..... By the way, my HF8 works in PC mode, and the red LED light is always on (not flashing) What I can confirm is that my HF8 is not broken, because if I turn it to sound capture mode, it will vibrate normally，But this mode is not what I would expect in DCS and I noticed that my seat status was unknown，If that's why my seat doesn't vibrate properly？ WHY ？？？What system software do I need to update？？ I need help What system software do I need to update

It works!!!Thanks pal!

It looks like the A10CII radio got a new station a few months ago, after this new station was updated, I sent the SRS didn't work, I could hear other people's radio calls normally, but I couldn't send them (whether I set the ARC-210 radio to TR or TR/G), after I pressed the PTT button, The "TR" symbol does not appear in the SRS floating window, All of my SRS Settings are correct because, with any other aircraft, I can use SRS to make calls. but it won't work only on the A10CII. What's going on here?

It works !!Thanks

I did what you asked, and nothing happened。。。。when i click "finish"button , I still only copy very few keywords , wait , you mean ,i should "insert" the keywords in the Keyword section , or "replace" the keywords in the keyword section ?

Thank you very much for your reply，English is not my native language，So I can't read the manual very well，Could you tell me where this "final steps" is in the manual？Or can you just tell me what to do？thanks very much

First time using this plugin as you see , the number of my keyword is 0 ,why ? I have installed vaicom correctly and imported the VA file “vaicom pro for dcs world“ In this case, my vaicom didn't work at all

I had the same problem as you. the Keyword command phrase list only has about 30 commands. Did you solve yours? How was it resolved?

It's time to give up SteamVR, install OpenXr, and you'll see a 30% increase in frame rate and a faster boot time, so none of the above issues will be a problem

IT WORKS !!!!!!!!! I just upgraded my motherboard's BIOS to the latest version ，And then it worked, and the problem didn't recur !!! Your prompt gave me the most accurate answer， Thanks a lot dear brother!!!

First of all, English is not my first language, so please forgive my grammar and spelling mistakes. Fellow pilots, I sincerely seek your help and advice.My HP REVERB G2 had the same problem that most people have, and it seemed more severe.I took a number of steps to find out why,Unfortunately, I'm almost certain that this is ED's problem, the DCS itself.I don't know if we have a way to solve it ourselves 1. The fault phenomenon When entering the online game（ note that it is an online game, not an offline stand-alone game）,Every time I press F2 to switch to another plane view, Or when my plane enters a more complex low-altitude scene,Or just every three to five minutes,my G2 first enters a brief blue screen（about a second or two）,Then the camera lost track,The picture in G2 starts to drift and rotate（If you check one of the options in Settings, the screen will grey out）,It soon returned to normal,The whole process lasts about 5 seconds.And then the pattern repeats itself 2. Some basic facts My hp reverb g2:new ,V2 cable. Why am I almost certain it's not G2's problem?Because I had this problem with my last G2, and I thought it was broken, so I bought a new one,but problem still exits. My PC: amd 5800X / MSI rtx3090 / kingston 32g / B550 /windows11 The latest version setting:No matter how you set the picture quality, the problem still occurs 3. The steps I've taken so far I see a lot of pilots talking about this in the forums,Some solutions are also given，I put these ideas to the test one by one,But unfortunately,problem still exits.These methods are： （1）restart my computer or（2）Clearing mixed reality Environment Data or（3）Purchase a PCIE USB adapter with independent power supply,and Plug the data cable of G2 into the USB3.0 interface of the card by the way ,I had great hopes for this approach，But unfortunately it didn't work,The aforementioned blue screen and lost track phenomena,This parameter is displayed when the data cable of G2 is inserted into the USB3.0 port on the PCIE card. BUT , If I plug the data cable of G2 directly into the USB3.0 interface of the PC motherboard，Every once in a while（about 8minutes），G2 automatically restarts or enters hibernation and cannot be woken up（At this point the PC display shows DCS is still running normally）,This situation is even worse，It's like DCS just kicked out my G2..... or（4）Uninstall mixed reality completely，Remove all cables from G2，Then download and install again or （5）Run DCS in either OpenXR or SteamVR,problem still exits 4. My preliminary analysis First of all, many pilots in the forum think that The location loss of G2 is affected by ambient lighting in the room,but i don't think so,Because it can't explain why these problems only occur in online games, while everything works in offline standalone mission.The most important thing is,My G2 didn't have any problems running other games,The problem only appears in the DCS online game, and the server more plane, the more serious the problem.So, after excluding power supply, environment, hardware, operation and other reasons,I think it's probably the DCS themselves. Sincerely hope that you pilots can provide some solutions other than the above，I'll test them one by one and report the results in the comments Finally, we are still grateful to ED for allowing us to experience the life we aspire to as a real pilot，I also hope ED can see my problem and try to solve it.

How do I know which two cores are the fastest ?

When I followed the instructions to install openxr, It does dramatically improve the frame count of VR，but there is a new problem:When I went into the main interface of DCS world , Everything seems normal，but When I started playing the game,In the left eye of my hp reverb g2,There is a large black triangle in the picture. So , What’s going on here?How do I solve the Black Zone problem？ (I replaced the following three files in the \DCS World OpenBeta\bin 1.D3DCompiler_47.dll 2. opencomposite.ini 3. openvr_api.dll ) OCXR_WMR_ACC.rar