01G8R

See attached. The colors inside the grip for the Mini-Din are Green, Yellow, Orange, Red, Brown. My Mini-Din cable is now wired the same colors (was different in previous pictures) and I have continuity from the end of my wires to the connector inside the grip with no shorts.

Something is wrong here. I have tried two different boards with MMjoy and a board with FreeJoy. None of them work. I wired a completely new Din connector and checked continuity. My next step is to try and test the grip on a Warthog base. Unfortunately I don't have one. I bought the stand alone grip for this project so I don't have any way to test it right now. Possibly I bricked the grip working on it.

Thanks for checking it over. I have saved the settings in MMJoy. I pulled the Mini Din connector apart and re-wired so my colors match the stock TM. I have verified continuity from the end of my connector to the plug inside the TM grip. Still not getting anything with a button press. I'm sure I am missing something. Thanks for the help.

Thanks. I have verified that I am using MMJoy ver [v20160818upd1] and it is loaded on the Arduino properly.

Please note my wire colors do not match up to the stock colors, but attached is how they are connected. Do I need to identify the SPI-SCK in MMJoy?

Yes, thank you. I switched that per my previous post and still no joy.

Figured out one thing. The Input Number printed on the Leonardo doesn't appear to be correct for MMJoy. Changed it to what is listed in the DL package pictures folder and now they are not all lit up. Still don't get any action from pressing the buttons, but this might be progress

The pinout in the Reddit link is different than what Terry posted above. I have tried both without success.

I was able to DL and install the FW for MMJoy on an Arduino Leonardo. Using the pinout from https://www.reddit.com/r/hoggit/comments/45j5pk/tm_warthog_stick_circuitry/. I tried with the 2015 and newest 2016-11 Firmware. I get what appears to be the correct number of buttons in MMJoy, but they are all lit up. When I physically press them nothing happens. Any advice would be appreciated. On the Leonardo A0 is Data, A1 is CS and SCK is SCK.

Thank you. I appreciate the information and will keep the forum updated on my progress.

Thanks. I saw Debolestis' Thread and was working my way through it. I think the MMjoy2 or FreeJoy option is the way to go.

I would like to use a TM grip for a cyclic project without the base. I have some experience with wiring Bodnar boards, but don't know where to start with wiring up the grip using the shift registers. Any help or direction would be appreciated.

That looks great. Just what I am looking to do as well. I think these are the other switch panels. http://derekspearedesigns.com/p1p2.html http://derekspearedesigns.com/dsd-race-king.html

Has anyone gotten the Quest, Virtual Desktop, and DCS setup working wireless? I'm waiting for a link cable to arrive, but used the Quest in 2d and it is much better than the CV1 I had been using.