Jump to content

Recommended Posts

Posted (edited)

HI guys I have come across some indicators these will work for the Following page # (pg) number in the DCS-A-10C_Flight_Manual_EN are listed so you can see what they look like in the air craft .

The lights i have do not have the mounting frames yet I am looking in to double mounts for the Gun arm/Nose wheel, Marker/Canopy, and Vertical 3 light. mounts for the Refueling and AOA sets.

They do not have green lenses or the correct labeling yet. I am looking in to Agua blue or Teal green lenses

 

I have no idea what the mounting frames will cost but as all way their cheaper when more are purchased. Please let me know if any of you are interested and how many lights you would like, and what style of frames you would want thanks

 

Aerial refueling status indicator 3 lights pg 128

Angle of attack indexer 3 lights pg 129

Gun arm and nose wheel steering lights 2 lights MIP pg 109

Marker and Canopy lights 2 lights MIP pg 123

Landing Gear Position Lights 3 lights

on the landing gear panel

TAKEOFF TRIM light on the SAS panel 1 light pg 148

Disengage AIL and ELEV light 4 lights

on the Emergency Flight Panel pg 151

18 lights total

Pictures of the units with out a frame

top.jpg

 

The front with out a frame

Front-1.jpg

 

In a single frame from the Emergency Flight Panel

Frontwithsingleframe.jpg

Edited by Deadman
clairity

https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824

CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.

Posted

Hi Deadman,

 

I'm interested in the Gun Rdy/NWS engaged, the Marker/Canopy indicator and the 3 Gear Status indicator. I would take them complete with frames and lights and labels if possible.

 

Most of the other indicator are mounted on the canopy frame which I don't plan to replicate.

 

Hope some others want these too so you end up with a reasonable amount of labour :) As you know, time is not pressing on me since I'm not starting with my pit earlier than May this year...so I can wait some months

Posted

Great, thanks for the update Deadman!

 

I guess you'll send PM's around with the final price including the shipping (to Switzerland in my case)...? No hurry, though ;)

 

Zenga

Posted

Hey DM, great find. Any chance you know the price of a set minus the TO Trim and AIL/ELEV lights would be without the frames? I'll build those myself out of wood. The Trim would be good for me too, but, well, I need to keep prices down, lol. If the price is right, I can probably convince the wife (I just spent around $800 on stuff, so not quite sure ;) ).

 

Another quick question, if you can... would these be connected to a Leo board, or a Phidgets Board?

A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C

i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog

[sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC]

Posted (edited)

Aerial refueling status indicator 3 units

Angle of attack indexer 3 units

Gun arm and nose wheel steering lights 2 units

Marker and Canopy lights MIP 2units

Landing Gear Position Lights 3units

 

That wound be 13 units by my count with or with out correcting the labels?

 

The lens holder all so holds two t1 3/4 those bulbs can be 5 v or 28V but can easily be changed to LDEs so i am sure they can be connected to what ever IO board you going to use.

As soon as I have the final price on the frames and have the material to change the filters from what they are to an NVIS color I will be able to give interested parties the cost of each type of set. Thanks

 

 

Hey DM, great find. Any chance you know the price of a set minus the TO Trim and AIL/ELEV lights would be without the frames? I'll build those myself out of wood. The Trim would be good for me too, but, well, I need to keep prices down, lol. If the price is right, I can probably convince the wife (I just spent around $800 on stuff, so not quite sure ;) ).

 

Another quick question, if you can... would these be connected to a Leo board, or a Phidgets Board?

Edited by Deadman

https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824

CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.

Posted

Damn, I oversaw the T.O.Trim indicator for the SAS panel. Could you add one unit for me too? Including frame, light and label?

 

Thx! By the way: Your covers look outstanding on my Warthog. I really hesitate to fly now...since that would force me removing them:lol:

Posted
HI guys I have not planned on offering these with out the frame is made to hold the light face and body together. this frame has very tight tolerance.

 

Ah ok. I was thinking I could just build it out of wood. Curious to know how much each one is though, or did I miss something and the more interested, the cheaper the price? (if so, everyone buy! Hehe)

A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C

i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog

[sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC]

Posted (edited)

Yes Hog you missed the part about I am waiting for the cost to have the frames cut min amount the guy will do and when he can fit it in to his scheduled you obviously have spent some cash so quit wining about a price i have not set please

Edited by Deadman

https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824

CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.

Posted (edited)

wasn't wining about the price so don't go getting annoyed. It was a statement for all of us. The more that can buy into these things to drop the prices for all of us, the better. right? That being said, I will definitely buy a full set, so don't worry.

Edited by hog_driver111th

A-10C - FC3 - CA - L-39 - UH1 - P-51 - Hawk - BS2 - F-86 - Gazelle - F-5E - AV8B - F/A-18C

i5-4590 - GTX 1060 - Oculus CV1 - TM:Warthog

[sIGPIC]http://forums.eagle.ru/signaturepics/sigpic9979_1.gif[/sIGPIC]

Posted
wasn't wining about the price so don't go getting annoyed. It was a statement for all of us. The more that can buy into these things to drop the prices for all of us, the better. right? That being said, I will definitely buy a full set, so don't worry.

 

You would think that would be the case or have two prices with and without the trim.....just a thought.

i7-4820k @ 3.7, Windows 7 64-bit, 16GB 1866mhz EVGA GTX 970 2GB, 256GB SSD, 500GB WD, TM Warthog, TM Cougar MFD's, Saitek Combat Pedals, TrackIR 5, G15 keyboard, 55" 4K LED

 

Posted

I may be interested if I can put LEDs in them, so I can drive then from my Phidgets board, and if the price is reasonable. Any chance you can give us a guestimate on the price ?

[sigpic][/sigpic]

 

PDP, VAX and Alpha fanatic ; HP-Compaq is the Satan! ; Let us pray daily while facing Maynard! ; Life starts at 150 km/h

Posted (edited)

You can use LEDs in these you can purchase an LED bulb that will fit or Modify the current bulb using this Led modding tutorial http://www.viperpits.org/smf/index.php?topic=3437.new

 

Led bulbs are available here in pure green http://www.ledtronics.com/Products/ProductsDetails.aspx?WP=1089

Blue and Aqua Green here http://www.ledtronics.com/Products/ProductsDetails.aspx?WP=1088

Edited by Deadman

https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824

CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.

Posted

Okay, consider me interested for a full set pending price and export to Europe.

[sigpic][/sigpic]

 

PDP, VAX and Alpha fanatic ; HP-Compaq is the Satan! ; Let us pray daily while facing Maynard! ; Life starts at 150 km/h

Posted

Are you willing to mention your minimum price? Also will be bidding in the blind by sending you a PM, or will we be doing it auction like and bid here in the open in this topic? I prefer doing it all in the open because otherwise I really have no idea how much to offer.

[sigpic][/sigpic]

 

PDP, VAX and Alpha fanatic ; HP-Compaq is the Satan! ; Let us pray daily while facing Maynard! ; Life starts at 150 km/h

Posted

PM sent with teh limit amount of units i am look for serious intrested parts only so communication cam be through pm

Are you willing to mention your minimum price? Also will be bidding in the blind by sending you a PM, or will we be doing it auction like and bid here in the open in this topic? I prefer doing it all in the open because otherwise I really have no idea how much to offer.

https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824

CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.

Posted

OK guy here is the news on frames they will cost $15.00 a set to cut on the water jet if you guys that were interested want to cancel i understand totally. lenses are all so being problems the film I have looks great untill it is back lit then it turns from jet black to gray so I may just sell the units for $6.00 each and cut my losses on the supplies let me know if your interested

https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824

CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...