Program for export data (uv26, pvi, pui800) for dcs ka50

[Crivi]

Hello. I updated the dll and dcsextract.cs to include a functions to send keystrokes to the simulator, which I use for my android program, if it's any use to someone.

[bnepethomas]

Hello. I updated the dll and dcsextract.cs to include a functions to send keystrokes to the simulator, which I use for my android program, if it's any use to someone.

 

Thank you - you've just saved me a bunch of time.

 

Cheers

 

Peter

[Crivi]

Hi, I updated the dll for 1.2.8 to see the cmsc and cmsp the a10 as pvi, uv and ekran the KA50

[Warhog]

Need a Little Help

 

Well I downloaded the DCSExtractGui and all the files associated with it and placed it in a folder next to DCS. I fired up the .exe file after I had an A10C in the air and the GUI came up with game detected/searching and after a short while it showed some of the info such as ILS, Tacan and UHF but the rest of the data...VHF AM/FM and the CMSP had no data in it, just some strange symbols. I did of course have these turned on and set to various channels, etc to check that they were picking up the correct information.

 

Any idea what I may have done wrong. I am running DCS 1.2.8 and WIN7 64 Pro.

 

Thanks guys.

[bnepethomas]

Well I downloaded the DCSExtractGui and all the files associated with it and placed it in a folder next to DCS. I fired up the .exe file after I had an A10C in the air and the GUI came up with game detected/searching and after a short while it showed some of the info such as ILS, Tacan and UHF but the rest of the data...VHF AM/FM and the CMSP had no data in it, just some strange symbols. I did of course have these turned on and set to various channels, etc to check that they were picking up the correct information.

 

Any idea what I may have done wrong. I am running DCS 1.2.8 and WIN7 64 Pro.

 

Thanks guys.

Hi John

 

Was this in multiplayer mode, I'm running into something funky which I think is due to multiplayer mode, just haven't had time to verify. It had been working fine in single player, which is where I do all my testing.

 

Cheers

Peter

[Warhog]

Hi John

 

Was this in multiplayer mode, I'm running into something funky which I think is due to multiplayer mode, just haven't had time to verify. It had been working fine in single player, which is where I do all my testing.

 

Cheers

Peter

 

Hi Peter

 

It was SP mode. I am doing the same as you...getting everything running in SP mode before I attempt anything in multiplayer.

 

Could it have anything to do with the fact that Helios has a script running. I didn't actually have Helios active at the time but I know it has a script to export from DCS.

[Crivi]

Hi. I have not had time to do it for the latest version of the open beta, which is that I'm working with a few weeks ago. This weekend will put me to it.

 

Are you using release?

[Warhog]

Hi. I have not had time to do it for the latest version of the open beta, which is that I'm working with a few weeks ago. This weekend will put me to it.

 

Are you using release?

 

Sorry. My bad. I had thought that it had been completed. Guess I'm getting a little ahead of myself. I will keep an eye out for the finished product.

 

As to your question...I am running the very latest from DCS 1.2.8 on a WIN 7 64 Pro PC.:)

 

 

 

BTW Crivi, you know that your endeavours here are going to make a huge difference to many of the DCS pilots. Between your work and Peters (bnepethomas) efforts you are going to see many people able to realise their dreams of a more complete and immersive cockpit. Myself included. Thank you both.:thumbup:

 

When all is said and done however, would either or both of you consider preparing a guide in laymen's terms for the new Wiki that Tigershark and Devon Custard have started. Both of your efforts would be an excellent contribution. In case you are unfamiliar with this, please have a read at

 

http://forums.eagle.ru/showthread.php?t=124302

 

This invitation is open to all of you that have developed new techniques, innovative ideas and/or solved various problems in the development of your cockpits.

 

Thanks again.:)

[bnepethomas]

Hi Peter

 

It was SP mode. I am doing the same as you...getting everything running in SP mode before I attempt anything in multiplayer.

 

Could it have anything to do with the fact that Helios has a script running. I didn't actually have Helios active at the time but I know it has a script to export from DCS.

 

I'd be very surprised if Helios is causing problems. One thing I think you may be running into, that I've not verified, is if you finish a mission and then go back in you may need to restart the exporting program. Again I've not verified it.

 

Cheers

 

Peter

[Crivi]

Hello. I have returned to review the code and everything seems to be fine. In my pc in single player and multiplayer I do well. I uploaded the dll back to github if that had been the problem. My versions 1.2.8.27503 and dcs are 1.2.8.27529

 

Very good link to the wiki: D

[Warhog]

I tried it again but this time I use your latest upload. Its was reading everything except the 2 VHF radios. I tried turning the radios on and off, changed the channels, etc but the readings in the display box didn't change what so ever. The Tacan, ILS and CMSP all updated properly whenever I made a change. It works really well.:)

 

I don't know why just the two VHF radios won't work when everything else works perfectly.

 

Any suggestions?

[FSFIan]

I am observing the same behavior as WarHog -- the VHF radio frequencies are missing, everything else is displayed correctly.

 

Also, when I open DCSExtractGui.csproj (using Visual Studio Express 2013 for Windows Desktop) and press F5, I get the following compile errors:

1>D:\data\DCSExtract\Form1.cs(71,26,71,64): error CS1501: No overload for method 'scan_ka50' takes 3 arguments

1>D:\data\DCSExtract\Form1.cs(227,17,227,99): error CS1501: No overload for method 'ScanPVI' takes 6 arguments

1>D:\data\DCSExtract\Form1.cs(250,17,250,60): error CS1501: No overload for method 'ScanR828' takes 2 arguments

1>D:\data\DCSExtract\Form1.cs(288,17,288,74): error CS1501: No overload for method 'ScanR800' takes 3 arguments

 

Is the code for DCSExport64.dll publicly available? I would be interested in how it works, the ability to adapt it to future DCS versions myself and possibly making it export additional information.

Edited May 21, 2014 by [FSF]Ian

[agrasyuk]

I'm in the middle of cleaning up Helios so it's open source. Is expect a minor big fix release in the next few weeks. If the authors don't mind I'll include this feature as a module.

 

Hey there, was wondering how are you doing these days and what became of the project :).

 

Best regards.