CoBlue Posted December 27, 2014 Posted December 27, 2014 (edited) In the controls option set up for, Npp course set + & -. The default or assigned key binding doesn't work. Edited March 12, 2015 by Cobra847 i7 8700k@4.7, 1080ti, DDR4 32GB, 2x SSD , HD 2TB, W10, ASUS 27", TrackIr5, TMWH, X-56, GProR.
Dolphin887 Posted January 20, 2015 Posted January 20, 2015 Noted, thank you. Power through superb knowledge, training and teamwork. [sIGPIC][/sIGPIC]
Reksi-Erkki Posted January 20, 2015 Posted January 20, 2015 There's an axis assignment for the NPP course as well, I wonder if that blocks the keys/buttons? However, it's... weird. The course needle rotates in a somewhat erratic fashion, and always in one direction only, no matter how the axis is adjusted - and suddenly the direction is just reversed. It's almost impossible to set the course. I'd rather use one of my encoder switches if it was possible. The altimeter can be adjusted with the analog axis just fine! Dear Shilka. I hate you so very very much. Love, Rex
zaelu Posted January 20, 2015 Posted January 20, 2015 The npp course needle axis seems programed for ministick axis.... Or at least with ministick axes works ok...ish but still quite imprecise. A proper axis for it should be good. [sIGPIC][/sIGPIC] I5 4670k, 32GB, GTX 1070, Thrustmaster TFRP, G940 Throttle extremely modded with Bodnar 0836X and Bu0836A, Warthog Joystick with F-18 grip, Oculus Rift S - Almost all is made from gifts from friends, the most expensive parts at least
Reksi-Erkki Posted January 20, 2015 Posted January 20, 2015 A proper axis would be fine, and it works really nice with the altimeter - however, with the NPP, the endpoints would have to overlap a bit, i.e. you can have a 0 degree course at both ends of the axis, with some excess range left. The total range could be 340...0...180...0...20 or something like that. Just in case the axis is not accurately calibrated. A rotary encoder would (IMHO) be more realistic (no endpoints), but using an axis to set an absolute course would be OK, and probably more accurate too. Assuming that the pots are good. Dear Shilka. I hate you so very very much. Love, Rex
kn5 Posted March 22, 2015 Posted March 22, 2015 I still can not allocate NPP course set +/-the keys (i use encoder) - is is shown as a gray box, assign to the axis (pot) is possible, but it acts weird as above.
Recommended Posts