Jump to content

Recommended Posts

Posted

So I put the second card in. Enabled SLI in the Nvidia software and got 6fps down from 30 average with a triple screen setup.

Now, I didn't spend more than 5 minutes on this but there might be something very small I'm missing. I just want to know if this has been seen before and the fix to get past it.

Last night before I went to bed I was downloading the latest driver and it will be installed tonight but beyond that I dont' know if it'll work.

 

Any thoughts?

 

Dale

i9 9900K @ 5.1Ghz - ASUS Maximus Hero XI - 32GB 4266 DDR4 RAM - ASUS RTX 2080Ti - 1 TB NVME - NZXT Kraken 62 Watercooling System - Thrustmaster Warthog Hotas (Virpil Base) - MFG Crosswind Pedals - Pimax 5K+

VFA-25 Fist Of The Fleet

Posted

Run in fullscreen..

 

run nvidia surround, not three viewports

 

dont run uber high AA settings

I7 4770k @ 4.6, sli 980 evga oc edition, ssdx2, Sony 55 inch edid hack nvidia 3dvision. Volair sim pit, DK2 Oculus Rift.

Posted

Not in fullscreen, nvidia surround is running, aa settings are set reasonable.

 

That isn't the problem. With one card I got 30 fps with my current settings. Its some sort of SLI issue.

 

If it helps. I get 60fps steady in Crysis 3

 

Dale

i9 9900K @ 5.1Ghz - ASUS Maximus Hero XI - 32GB 4266 DDR4 RAM - ASUS RTX 2080Ti - 1 TB NVME - NZXT Kraken 62 Watercooling System - Thrustmaster Warthog Hotas (Virpil Base) - MFG Crosswind Pedals - Pimax 5K+

VFA-25 Fist Of The Fleet

Posted

Have you really connected both cars with the special cable?

 

Have you reinstalled the newest driver for both cards and set it to SLI/ multiple grafic cards.

Posted

Have you read all of the threads that state that SLI is not currently supported by ED?

 

Think this might be related?

"Pride is a poor substitute for intelligence."

RAMBO

Posted (edited)

Run it at full screen so sli works more properly. Also check your sli profile with app nvidia inspector. Sli works fine to a,certain extent with this game. Works very well with nvidia surround as that's how I used to fly the sim.

 

Ya you have the sli bridge connected? If so try to connect it to the other slots on video cards. Does sli work with other games?

 

http://forums.eagle.ru/showthread.php?t=99637

Edited by rcjonessnp175

I7 4770k @ 4.6, sli 980 evga oc edition, ssdx2, Sony 55 inch edid hack nvidia 3dvision. Volair sim pit, DK2 Oculus Rift.

Posted

Actually had to disable fullscreen for it to work. Its doing its thing but no improvement in FPS as of yet. I'll have to tweak some more.

 

I'll give the other thread a solid read.

 

Dale

i9 9900K @ 5.1Ghz - ASUS Maximus Hero XI - 32GB 4266 DDR4 RAM - ASUS RTX 2080Ti - 1 TB NVME - NZXT Kraken 62 Watercooling System - Thrustmaster Warthog Hotas (Virpil Base) - MFG Crosswind Pedals - Pimax 5K+

VFA-25 Fist Of The Fleet

Posted

Disable full screen for what to work? Sli don't work in windowed mode so you be better off just using one card. Theirs got to be something weird going on. As when I was running nvidia surround with sli 770 I was locked at 60 fpS until this bad engine kicked in

I7 4770k @ 4.6, sli 980 evga oc edition, ssdx2, Sony 55 inch edid hack nvidia 3dvision. Volair sim pit, DK2 Oculus Rift.

Posted

I'm running GTX-780's in SLI and get about 30% increase(60+FPS) versus single card(40-45 FPS). You might try experimenting with the settings in NVIDIA Inspector. It's a trial and error process. As has been noted, DCSW does not utilize SLI very well currently. Hopefully with 2.0 EDGE that will change.

Intel i5-4690K Devil's Canyon, GForce TitanX, ASUS Z-97A MB, 16GB GDDR3 GSkill mem, Samsung SSD X3,Track IR, TM Warthog, MFG Crosswind pedals, Acer XB280HK monitor,GAMETRIX KW-908 JETSEAT

Posted

Hmmm, yeah, no real increase. I'll try this inspector software and see what happens

i9 9900K @ 5.1Ghz - ASUS Maximus Hero XI - 32GB 4266 DDR4 RAM - ASUS RTX 2080Ti - 1 TB NVME - NZXT Kraken 62 Watercooling System - Thrustmaster Warthog Hotas (Virpil Base) - MFG Crosswind Pedals - Pimax 5K+

VFA-25 Fist Of The Fleet

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...