Is my video card performance not satisfactory?

[SayusiAndo]

Hi Guys,

 

I have a Lenovo Y510P machine with GT755M video card and I run DCS A10C on it. Sometimes I experience that the screen starts to shake back an forth, as if I press the headview buttons back and forth very fast. It is annoying and degrades the whole gaming experience.

 

Does the same happens with those who has much better box than I have?

 

My settings are set to medium, and I play only one screen with HD resolution. I fear it will be worse with TRackIr5.

 

It is sign of that the video card is not enough?

[RagingBunny]

Did you bind your zoom to a slider on your HOTAS? I used to have the Saitek X-52 HOTAS, and I had set zoom to a slider on the throttle. Turned out the slider wasn't of the best quality and before I knew it, my screen started shaking back and forth very rapidly because slider was twitchy.

[NineLine]

Yes, I see similar with my x55 putting the zoom on a radius, seems occasionally I have to touch it to stop it from jumping...

 

That said, for 1.5 and 2.0, your card is going to be the bare minimum.

[Gladman]

I second SithSpawn. The pots in the dials can cause a non-centered condition that makes the screen shake back and forth. A little touch either way to the zoom dial and it'll fix itself. Small problem once you understand it.

[SayusiAndo]

Thanks for the answers!

 

@RagingBunny: does not matter whether it is bound to the throttle slider (HOTAS WARTHOG and the slider moves the same direction as the throttle) it happens when I use the slider either keyboard.

 

@Gladman: I understand the problem but that I touch it a little or I press a button on the keyboard did not help in 95% of the cases. It became worse.

 

It happens when I move the view (as the pilot moves his/her head), it happens when I zoom in and zoom out, and, it happens more frequently if TGP is enabled. Sometimes I just fly and I do not touch anything and it starts shaking for a few seconds and it stops shaking.

[tintifaxl]

Could be a key assignment conflict. Maybe you have more than one axis bound to zoom?

[Gladman]

Post a video SayusiAndo. I might help us understand better what you are dealing with.

[Duckling]

..but that I touch it a little or I press a button on the keyboard did not help in 95% of the cases. It became worse

 

Might be off here but reading the above sounds you have both an axis and keys assigned ? Try unbind the axis control if so