jasonstory44 Posted January 6, 2016 Posted January 6, 2016 Hi Baltic, just trying your campaign for the first time. On very opening mission, The plane is uncontrollable right out of the gate. I'ts almost like flying in a hurricane. Although weather doesn't seem awful in the ME. Is this an installation problem? Thanks Jason Win 10 Pro, Intel i9 9900k overclocked to 5.1 (water cooled), 64 gb Corsair Dominator platinum RAM (3444 MHz) Titan RTX overclocked and water cooled 1.1 TB SSD 2 TB M.2 SSD TM Warthog Stick and throttle MFG Crosswinds Reverb VR Buttkicker LFE, SimShaker, Jetseat. All DCS modules
baltic_dragon Posted January 6, 2016 Posted January 6, 2016 Uncontrollable? Could you give some more details - you mean it is difficult to steer it etc? No, weather is good, no strong cross winds.. and I have never seen it nor heard about this problem before. Please share more information. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Yurgon Posted January 6, 2016 Posted January 6, 2016 Have you checked your controller assignments? Sounds like some axes mapped in the wrong place. ;) When setting up controls from the DCS main screen (not while setting up from the cockpit), be aware that with "Gameplay" -> "Game flight mode" checked, the Controls under "A-10C Game" will be used, and with "Game flight mode" set to off, the Controls from "A-10C Sim" will be used. Sounds like this could be mixed up for you.
jasonstory44 Posted January 6, 2016 Author Posted January 6, 2016 I'll try and provide a track. I suppose it could be the axis' but I was literally flying the maple flags missions in the a-10c right before with no issue. As soon as I hit fly, the plane does a nose dive to the left. I have to pull the stick full right just to compensate. And even at full throttle can't get airspeed above 160. I slowly bleed altitude, can't keep the plane level and have to exit the mission or I'm gonna crash into the sea. I've tried to attach a trk before but I'll give it a shot Win 10 Pro, Intel i9 9900k overclocked to 5.1 (water cooled), 64 gb Corsair Dominator platinum RAM (3444 MHz) Titan RTX overclocked and water cooled 1.1 TB SSD 2 TB M.2 SSD TM Warthog Stick and throttle MFG Crosswinds Reverb VR Buttkicker LFE, SimShaker, Jetseat. All DCS modules
jasonstory44 Posted January 6, 2016 Author Posted January 6, 2016 Last line should read I've never tried to attach a trk Win 10 Pro, Intel i9 9900k overclocked to 5.1 (water cooled), 64 gb Corsair Dominator platinum RAM (3444 MHz) Titan RTX overclocked and water cooled 1.1 TB SSD 2 TB M.2 SSD TM Warthog Stick and throttle MFG Crosswinds Reverb VR Buttkicker LFE, SimShaker, Jetseat. All DCS modules
jasonstory44 Posted January 6, 2016 Author Posted January 6, 2016 attached trk Ok, just tried it again...hope this helpsEnemywithin.trk Win 10 Pro, Intel i9 9900k overclocked to 5.1 (water cooled), 64 gb Corsair Dominator platinum RAM (3444 MHz) Titan RTX overclocked and water cooled 1.1 TB SSD 2 TB M.2 SSD TM Warthog Stick and throttle MFG Crosswinds Reverb VR Buttkicker LFE, SimShaker, Jetseat. All DCS modules
jasonstory44 Posted January 6, 2016 Author Posted January 6, 2016 Ugh...I'm sorry guys...nevermind. I don't know how or why but somehow my XBox controller got reassigned axis'. I cleared them and all is well. Didn't even realize that was possible. Sorry for the inconvenience. Excited to fly the campaign Win 10 Pro, Intel i9 9900k overclocked to 5.1 (water cooled), 64 gb Corsair Dominator platinum RAM (3444 MHz) Titan RTX overclocked and water cooled 1.1 TB SSD 2 TB M.2 SSD TM Warthog Stick and throttle MFG Crosswinds Reverb VR Buttkicker LFE, SimShaker, Jetseat. All DCS modules
Recommended Posts