[Official] SimShaker for Aviators

[mr_mojo97]

Olaf, as requested the User/Scripts/export file. This is identical to the one in 1.5.8 release (which it doesn't work with either).

 

Thanks

Les

DCS Openbeta Scripts Export.txt

[f4l0]

Olaf, as requested the User/Scripts/export file. This is identical to the one in 1.5.8 release (which it doesn't work with either).

 

Thanks

Les

 

Are you using a 'cockpit' software displaying altimeters, radios etc?

[mr_mojo97]

No, not for a long time, I did use Helios but that was well before vr came along. The only other thing that should be on there will be the Vaicompro entry. I can’t make heads or tails of it tbh.

[f4l0]

Ok, then I'll prepare a new export lua for you and remove all the helios stuff. Could you please backup/rename your current export.lua and create a new one with this content:

 

local SimShakerlfs=require('lfs'); dofile(SimShakerlfs.writedir()..'Scripts/SimShaker.lua')

dofile(lfs.writedir()..[[scripts\SimShaker-export-core\ExportCore.lua]])

-- VAICOM PRO server-side script
-- Export.lua (append)
-- version 2.5.0
-- do not edit next line:
-- B6F32E1C-BF4E-4708-98D9-2AC1C4783068 

local vaicomlfs = require('lfs'); dofile(vaicomlfs.writedir()..[[scripts\VAICOMPRO\VAICOMPRO.export.lua]])

 

If you don't use vaicom you could also remove these lines...

[mr_mojo97]

Funnily enough Vaicom also stopped working around the same time. In vr I don’t really like flying without Vaicom and the jetseat, so I’ll keep that in. So is Helios code still in there?

[f4l0]

In the code I attached to the posting, I just removed the Helios stuff, Vaicom and SSA are still in there

[mr_mojo97]

Mate, your a star. Not only has this fixed simshaker, its fixed Vaicompro as well. A conflict with the Helios code do you think?

 

10,000 Reps inbound. (If I could!)

[geert]

Can you please give me a track file once you see that Gazelle issue again?

 

Did you fix it already with the latest update? In trying to reproduce the problem to get a track I wasn´t even able to reproduce it after only short testing, then came the latest update and all seems fine. In case you already fixed it: many thanks donated :) (since I can´t find any donate button)

And hoping you can make a fix for the stationary, very quiet Spitfire, like you mentioned.

[adrianstealth]

hi

i.m using version 1.1.1.53

 

is this latest ?

[adrianstealth]

hi ,i downloaded the latest version and its much different

 

worked straight away though no probs

 

the flaps coming down vibration doesnt seem to work

theres the "flaps moment" but that didnt seem to do anything

 

-piston , using the P-51

 

any help appreciated

[BigMillerTime]

Hello f4l0!

 

Currently, in the F5, there is a very nice rumble with the engines, but when going into afterburner, all rumble is lost. Would it be possible to keep the rumble at military power, but change the feeling when going into afterburner? Sometimes the jet does not engage afterburners other certain conditions, so it's helpful to feel/hear a difference.

 

Thanks so much!

[huligan]

Spitfire "Gear Turbulence" vibro enabled without Gears(Gears UP)

Please fix it (when gears up - no vibro -i.e. no "Gear Turbulence")

Edited February 14, 2018 by huligan

[ctd01]

Dear Olaf,

 

I have now read through all 860+ posts in this thread and have to say this. I really admire your patience and your engagement and efforts to make the Jetseat become what every flight sim enthusiast dream of. Ofc this compliments goes to Andre too for his part of the sake.

 

I have recently ordered a JS SE edition and is very much looking forward to install it to my system with your software. Please tell my how I can make a donation to show you my appreciation of your hard work.

 

Best regards

Michael

[WARonWAR]

No cannon rumble

 

I thought I had my issues sorted out but I’m still having problems with the cannon rumble not working (or working sporadically) in the A-10C and F15. I am using a buttkicker type setup.

 

As of last night, all seems to work fine when in VR (oculus). When flying in non-VR is when I have problems. If there is anything I should try please let me know. I will deal with it for now because I usually fly in VR anyway but I wanted to bring it up.

 

Thanks again for a great product- I can’t imagine flying without it!

[Spectre1986]

Beta version 1.0.2.0 is released. Please take attention that the SoundModule is now a separate installation! You can download it from:

https://dreamsimteam.blogspot.ru/p/downloads.html

or

http://dsteam.azurewebsites.net/simshaker-sm/beta/publish.html

 

Please give feedback if the separation went well...

 

The first download link still describes the download as an add-on to Simshaker but it is now standalone. Let Andre know that needs to be fixed.

[f4l0]

Dear Olaf,

 

I have now read through all 860+ posts in this thread and have to say this. I really admire your patience and your engagement and efforts to make the Jetseat become what every flight sim enthusiast dream of. Ofc this compliments goes to Andre too for his part of the sake.

 

I have recently ordered a JS SE edition and is very much looking forward to install it to my system with your software. Please tell my how I can make a donation to show you my appreciation of your hard work.

 

Best regards

Michael

 

Thx for your kind words and patient to read everything :-).

 

Spitfire "Gear Turbulence" vibro enabled without Gears(Gears UP)

Please fix it (when gears up - no vibro -i.e. no "Gear Turbulence")

 

Thx, I'll have a look a this...

 

Hello f4l0!

 

Currently, in the F5, there is a very nice rumble with the engines, but when going into afterburner, all rumble is lost. Would it be possible to keep the rumble at military power, but change the feeling when going into afterburner? Sometimes the jet does not engage afterburners other certain conditions, so it's helpful to feel/hear a difference.

 

Thanks so much!

 

Last time I flew the F5, I good AB rumble effect. When RPM reaches AB values SSA stops normal engine rumble and plays the AB effect. This is to reduce issues with overlapping effects!

 

I thought I had my issues sorted out but I’m still having problems with the cannon rumble not working (or working sporadically) in the A-10C and F15. I am using a buttkicker type setup.

 

Are you using unlimited ammo? If yes, DCS always reports the same amount of bullets left in the gun and thus SSA does not notice if you fire the gun...

 

@All: I'm currently busy with my normal work and thus development of SSA is a bit delayed...

 

Cheers

Olaf

[BigMillerTime]

Last time I flew the F5, I good AB rumble effect. When RPM reaches AB values SSA stops normal engine rumble and plays the AB effect. This is to reduce issues with overlapping effects!

 

Understood on the overlapping effects. Perhaps it's broken on release version? Should I try beta?

[WARonWAR]

Are you using unlimited ammo? If yes, DCS always reports the same amount of bullets left in the gun and thus SSA does not notice if you fire the gun...

 

Thanks for the reply. No, unlimited ammo is off. I used the debugger tool and it looks like it is recognizing the ammo count.

 

What makes no sense to me is the cannon rumble works in VR mode, but not in non-VR mode. All other sounds seem to work as they should in both modes.

[huligan]

I prefer to disable the constant background vibration. So much better feel the effects!

[gcompc]

Hello, looking for some help

 

I just received my Jetseat recently and it has been a great experience so far. The issue I’m having is that in the software I can’t find the panel I see in the forum with adjustments for parameters for the software.

 

 

My jetseat feels great and the effects of simshaker (SSA) are fantastic. The question is can I change the intensity of the effects if I want to? I went into the Jetseat control panel and set the USB to manual assuming that it gives control to the intensity knob, not quite sure what the Mode and Motors buttons do but I have Mode selected. When I adjust the dial the intensity of the effects don't change at all. Is that just for Massage app or should it work in game? (I’m flying the Su-25T) or are the effects preset and can’t be adjusted. The effects still occur with the dial in the full off position.

 

 

When Simshaker loads it just sends a popup that says” Hello Pilot I’m here to assist I’ll start simshaker when you start a mission” or something to that affect. I looked in the simshaker folder but there are no adjustment type items there. I can click on the simshaker icon and get to the UWV editor but I don’t understand those adjustments are for. Version is 1.1.

 

 

looking for info of how this should work or point me to a guide for using the software if any available. Thanks for any help or tips. :helpsmilie:

[gcompc]

Doh!

 

Never mind, how dumb can one be, tried the Start Simshaker Button, who would of thought! :doh:

[streakeagle]

I just received my Jetseat recently and it has been a great experience so far. The issue I’m having is that in the software I can’t find the panel I see in the forum with adjustments for parameters for the software.

 

 

My jetseat feels great and the effects of simshaker (SSA) are fantastic. The question is can I change the intensity of the effects if I want to? I went into the Jetseat control panel and set the USB to manual assuming that it gives control to the intensity knob, not quite sure what the Mode and Motors buttons do but I have Mode selected. When I adjust the dial the intensity of the effects don't change at all. Is that just for Massage app or should it work in game? (I’m flying the Su-25T) or are the effects preset and can’t be adjusted. The effects still occur with the dial in the full off position.

 

 

When Simshaker loads it just sends a popup that says” Hello Pilot I’m here to assist I’ll start simshaker when you start a mission” or something to that affect. I looked in the simshaker folder but there are no adjustment type items there. I can click on the simshaker icon and get to the UWV editor but I don’t understand those adjustments are for. Version is 1.1.

 

 

looking for info of how this should work or point me to a guide for using the software if any available. Thanks for any help or tips. :helpsmilie:

 

 

Right-click the tray icon and click on "Start SimShaker for Aviators", that should give you the interface you seek.

[Nicolai]

Hi f410

 

Thank you for your awesome work!

 

I read the Q&A and understand that SSA can only work with one installation of DCS.

I currently have 1.5 and 2.5 installed. SSA works perfectly in 1.5.

However, I would like to move permanently to 2.5 and only keep 1.5 for testing.

 

How can I move SSA to 2.5?

[f4l0]

Hi f410

 

Thank you for your awesome work!

 

I read the Q&A and understand that SSA can only work with one installation of DCS.

I currently have 1.5 and 2.5 installed. SSA works perfectly in 1.5.

However, I would like to move permanently to 2.5 and only keep 1.5 for testing.

 

How can I move SSA to 2.5?

 

SSA works with 2.5. I have 1.5, 2.2 and 2.5 installed...

[Nicolai]

SSA works with 2.5. I have 1.5, 2.2 and 2.5 installed...

 

Hmmm....my SSA definitely doesn't work in 2.5 -Only in 1.5

 

Do you have any ideas or suggestions?

 

Thanks