f4l0 Posted February 2, 2018 Author Posted February 2, 2018 Ok, if I find some time, I'll check the Spitfire... Cheers f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
Rogue Trooper Posted February 2, 2018 Posted February 2, 2018 I am a little confused about the software. I cannot find an obvious place to donate to the development of the software or is there now a purchase version of the software? A few links would be good, as superb work deserves reward. HP G2 Reverb (Needs upgrading), Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate. set to OpenXR, but Open XR tool kit disabled. DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), DLSS setting is quality at 1.0. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC... Everything needs upgrading in this system!. Vaicom user and what a superb freebie it is! Virpil Mongoose T50M3 base & Mongoose CM2 Grip (not set for dead stick), Virpil TCS collective with counterbalance kit (woof woof). Virpil Apache Grip (OMG). MFG pedals with damper upgrade. Total controls Apache MPDs set to virtual Reality height. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound... goodbye VRS.
geert Posted February 2, 2018 Posted February 2, 2018 Ok, if I find some time, I'll check the Spitfire... Cheers Thanks for that!
f4l0 Posted February 3, 2018 Author Posted February 3, 2018 I am a little confused about the software. I cannot find an obvious place to donate to the development of the software or is there now a purchase version of the software? A few links would be good, as superb work deserves reward. I sent you a PM :-) f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
adrianstealth Posted February 4, 2018 Posted February 4, 2018 Hi the vibration units I want to be used by sim shaker are plugged into the rear L&R of my sound card how do I tell sim shaker to output to these??
f4l0 Posted February 4, 2018 Author Posted February 4, 2018 Hi the vibration units I want to be used by sim shaker are plugged into the rear L&R of my sound card how do I tell sim shaker to output to these?? That's a SoundModule related question, that should be asked to Andre. However, the SoundModule requires a separate sound card or channel. If you use a USB headset, then you can the internal motherboard sound card. Therefore just select the sound card in SoundModule... f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
huligan Posted February 6, 2018 Posted February 6, 2018 (edited) KW-901 DCS 2.5 (same 1.5.8) SimShaker for Aviators beta USB-mode win7 x64 & win10 x64 same Please , how to fix this? If I have throttle on vkb Gametrix ECS 1.No vibro-effects for Cannon/Gun fire 2.spontaneous twitches throttle & ATA (vkb Gametrix ECS) And if I remap throttle from vkb Gametrix ECS to other joy(vkb Gladiator) all works fine(1. & 2. point in 1.5.8 only,in 2.5 No vibro-effects for Cannon/Gun fire) Edited February 6, 2018 by huligan win10 21H2 | Ryzen 5600 4.6GHz | 32Гб DDR4 3200 | MSI RTX2080ti Ventus OC 11G | РУС vkb Gladiator Pro+РУД vkb Gametrix ECS+Пендали BRD-MS1 | Pico4 VR | | https://vk.com/paraplan_mkp
f4l0 Posted February 6, 2018 Author Posted February 6, 2018 KW-901 DCS 2.5 SimShaker for Aviators beta USB-mode Please , how to fix this? 1.No vibro-effects for Cannon/Gun fire 2.spontaneous twitches throttle & ATA 1. Are you using unlimited ammo? 2. The throttle issue has nothing to do with Simshaker. Please check your axis assignment in DCS. f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
huligan Posted February 6, 2018 Posted February 6, 2018 1. Are you using unlimited ammo? 2. The throttle issue has nothing to do with Simshaker. Please check your axis assignment in DCS. 1.Yes!!! in 1.5.8 normal ammo and vibro works, in 2.5 I set unlimited ammo and no vibro 2.I found the reason-changed the usb-port and it fix issue :D Thanks! Vibro-effects for Cannon/Gun Fire works only with normal ammo? win10 21H2 | Ryzen 5600 4.6GHz | 32Гб DDR4 3200 | MSI RTX2080ti Ventus OC 11G | РУС vkb Gladiator Pro+РУД vkb Gametrix ECS+Пендали BRD-MS1 | Pico4 VR | | https://vk.com/paraplan_mkp
huligan Posted February 6, 2018 Posted February 6, 2018 disabled unlimited ammo and Vibro-effects for Cannon/Gun Fire works fine :D win10 21H2 | Ryzen 5600 4.6GHz | 32Гб DDR4 3200 | MSI RTX2080ti Ventus OC 11G | РУС vkb Gladiator Pro+РУД vkb Gametrix ECS+Пендали BRD-MS1 | Pico4 VR | | https://vk.com/paraplan_mkp
f4l0 Posted February 6, 2018 Author Posted February 6, 2018 Yes, since SSA looks at the number of shells and they do not change when unlimited ammo is enabled thus SSA do not notice if one shoots... f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
adrianstealth Posted February 6, 2018 Posted February 6, 2018 hi how do we get simshaker to work with dcs 2.5??? I did afresh install
f4l0 Posted February 6, 2018 Author Posted February 6, 2018 hi how do we get simshaker to work with dcs 2.5??? I did afresh install Should work out of the box. But please give me the path to your dcs profile. f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
adrianstealth Posted February 6, 2018 Posted February 6, 2018 (edited) great cheers, what is a path dcs profile ? you mean the path of my dcs installation ? i think simtools motion is knocking the file out ?? cant get them both together like before edit: think i sorted it, its order of installing , simtools first then sim shaker thanks Edited February 6, 2018 by adrianstealth
f4l0 Posted February 7, 2018 Author Posted February 7, 2018 great cheers, what is a path dcs profile ? you mean the path of my dcs installation ? i think simtools motion is knocking the file out ?? cant get them both together like before edit: think i sorted it, its order of installing , simtools first then sim shaker thanks Ah good to know, might be possible that SimTools overwrites some config files... f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
huligan Posted February 8, 2018 Posted February 8, 2018 I have issue with simshaker's CPU load How to fix it? win10 21H2 | Ryzen 5600 4.6GHz | 32Гб DDR4 3200 | MSI RTX2080ti Ventus OC 11G | РУС vkb Gladiator Pro+РУД vkb Gametrix ECS+Пендали BRD-MS1 | Pico4 VR | | https://vk.com/paraplan_mkp
f4l0 Posted February 8, 2018 Author Posted February 8, 2018 I have issue with simshaker's CPU load How to fix it? As long as only DCS runs a no Plane/Helicopter is loaded, SSA busy waits for incomming data and thus uses that much cpu resources. In the next version I'll implement some workarounds maybe they will help... f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
huligan Posted February 8, 2018 Posted February 8, 2018 Thanks! win10 21H2 | Ryzen 5600 4.6GHz | 32Гб DDR4 3200 | MSI RTX2080ti Ventus OC 11G | РУС vkb Gladiator Pro+РУД vkb Gametrix ECS+Пендали BRD-MS1 | Pico4 VR | | https://vk.com/paraplan_mkp
huligan Posted February 8, 2018 Posted February 8, 2018 I installed release version SSA (not beta) ,and no problems with CPU load win10 21H2 | Ryzen 5600 4.6GHz | 32Гб DDR4 3200 | MSI RTX2080ti Ventus OC 11G | РУС vkb Gladiator Pro+РУД vkb Gametrix ECS+Пендали BRD-MS1 | Pico4 VR | | https://vk.com/paraplan_mkp
f4l0 Posted February 8, 2018 Author Posted February 8, 2018 Also, on a more SSA related topic, I noticed that with the spitfire there is shaking going on even when the aircraft is off. Haven´t read this thread in a while, don´t know if it´s a known issue. Spitfire effects are now fixed. Unfortunately, DCS still does not provide true engine RPM, instead, SSA read the rpm gage which reports "0" until RPM > 1000 thus SSA can not generate an idle effect. I'll try to implement a dirty workaround in the near future... Edit: I try to release a new beta at the weekend 2 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
mr_mojo97 Posted February 8, 2018 Posted February 8, 2018 Here's the log, Olaf. I just had a quick look through it, it has an error beside no soundmodule. I don't have a soundmodule although I seem to remember accidentally changing something in the SSA setting related to a soundmodule around the time it stopped working mabe.SSA.txt MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA |
f4l0 Posted February 8, 2018 Author Posted February 8, 2018 (edited) Here's the log, Olaf. I just had a quick look through it, it has an error beside no soundmodule. I don't have a soundmodule although I seem to remember accidentally changing something in the SSA setting related to a soundmodule around the time it stopped working mabe. Thank you very much for the log. Edit: Problem found and fixed, I'm publishing a new beta now... Edit2: Beta 1.0.2.2 published... Edited February 8, 2018 by f4l0 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
huligan Posted February 8, 2018 Posted February 8, 2018 Beta 1.0.2.2 published... Greet!!! I use beta again :D win10 21H2 | Ryzen 5600 4.6GHz | 32Гб DDR4 3200 | MSI RTX2080ti Ventus OC 11G | РУС vkb Gladiator Pro+РУД vkb Gametrix ECS+Пендали BRD-MS1 | Pico4 VR | | https://vk.com/paraplan_mkp
geert Posted February 9, 2018 Posted February 9, 2018 Bug in the SA342 Gazelle Spitfire effects are now fixed. Unfortunately, DCS still does not provide true engine RPM, instead, SSA read the rpm gage which reports "0" until RPM > 1000 thus SSA can not generate an idle effect. I'll try to implement a dirty workaround in the near future... Edit: I try to release a new beta at the weekend Thanks for the fix! Tested it briefly and seems to work now. Have you tried talking to ED about exporting more features (like engine RPM and firing of canon) to be exported? Just wondering about their response if any. And I have another bug for you to squash: In the Gazelle I sometimes get huge vibrations which don´t seem to go away. Yesterday I was able to reproduce the error in the same missions and after restarting DCS and simshaker. It had to do with the "failure and damage" effect, when deselected all is fine. Tested in the new Caucasus map. Thanks again. Cheers. Geert
f4l0 Posted February 9, 2018 Author Posted February 9, 2018 Can you please give me a track file once you see that Gazelle issue again? f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
Recommended Posts