Jump to content

Recommended Posts

Posted

Hi

 

I am having a dilemma! I can get steady 60fps on current settings until I fire up any campaign! Then nose dives to 40!

 

I have the following specs

 

PC

Intel 6700k @ 4.5

EVGA GTX 1080ftw

32 ram

SSD

4K ASUS screen

 

Does anyone have an up to date guide for 2018? I know there are lots about, but the are quite dated now!

 

Have tried downscaling and the results look bad! I know 4K is asking a lot! I will wait until the RTX 2080ti comes down!

 

Any advice much appreciated! Especially if you have similar hardware and have a workaround!

 

Cheers!

 

 

 

 

 

Sent from my iPhone using Tapatalk Pro

Posted (edited)

At the moment I'm forcing DCS to 60 fps and can hold that fairly well in most situations.

 

autoexec.cfg (options.graphics.maxfps = 60) It is better for my system with Track IR

 

I run SSAA x1.5

MSAA (OFF)

 

NVIDIA control (2x supersample)

 

The big thing here as you have mentioned (4K) is very hard on any system.....That's why I'm at 1440P G-Sync still, eye candy ---- FPS balance.

 

Your going to have to lower "things" down or try dropping to 1440P (How does it look at 1440P ?) I guess not real good if not at native res...

 

EDIT: Civ traffic I set to low or off normally....

 

attachment.php?attachmentid=199211&d=1543904741

Edited by David OC

i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro

Chuck's DCS Tutorial Library

Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link

Posted
At the moment I'm forcing DCS to 60 fps and can hold that fairly well in most situations.

 

autoexec.cfg (options.graphics.maxfps = 60) It is better for my system with Track IR

 

Hi David OC...how do you get FPS to lock at 60 using this method? Everytime that I have tried to set FPS at 60 with the autoexec file, the FPS displayed in DCS will show some number in the 50's.

i5 7600K @4.8GHz | 1080 Ti | 32GB 3200MHz | SSD | DCS SETTINGS | "COCKPIT"

Posted (edited)
Hi David OC...how do you get FPS to lock at 60 using this method? Everytime that I have tried to set FPS at 60 with the autoexec file, the FPS displayed in DCS will show some number in the 50's.

 

That setting simply caps the maximum framerate, which some have reported helps with smooth gameplay while using trackIR. Maintaining 60 fps is still a matter of tweaking settings for performance.

 

2080Ti will still drop into the 50's @ 4k with max settings and flying close to the ground.

 

Which a 1440p monitor with 1.5ssaa = 4k res pretty much.

Edited by Headwarp
Spoiler

Win 11 Pro, z790 i9 13900k, RTX 4090 , 64GB DDR 6400GB, OS and DCS are on separate pci-e 4.0 drives 

Sim hardware - VKB MCG Ultimate with 200mm extension, Virpil T-50CM3 Dual throttles.   Blackhog B-explorer (A), TM Cougar MFD's (two), MFG Crosswinds with dampener.   Obutto R3volution gaming pit.  

 

Posted
That setting simply caps the maximum framerate, which some have reported helps with smooth gameplay while using trackIR. Maintaining 60 fps is still a matter of tweaking settings for performance.

 

2080Ti will still drop into the 50's @ 4k with max settings.

 

I understand that part but this happens even in situations where I am getting FPS in the 120's+ unlocked....still shows 50 something FPS when I use the maxfps=60 autoexec.

i5 7600K @4.8GHz | 1080 Ti | 32GB 3200MHz | SSD | DCS SETTINGS | "COCKPIT"

Posted (edited)

Not sure why brianjmac..? Something must be affecting it possibly....

 

Do you use this full line below in the file?

 

options.graphics.maxfps = 60

 

This is what my pc looks like CPU - GPU - FPS when locked.

 

No Overclock on GPU and only @ 4.8Ghz CPU (Not even pushing near max CPU/GPU to hold 60) That's the point tho right, so she has headroom and makes Track IR smoother.

 

Mission F/A-18 Interdiction

 

attachment.php?attachmentid=199462&stc=1&d=1544275308

DCS_2018_12_08_23_14_32_909.thumb.jpg.595c07c99444ccc26bbad161896c45bb.jpg

Edited by David OC

i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro

Chuck's DCS Tutorial Library

Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link

Posted

After last OB update, seems like I have lower FPS also. I was OK before with my settings, but now its almost impossible to play.

 

I didnt changed anything. Why is that?

..:NAVY PILOTS ARE THE THE BEST PILOTS:..

Posted
Death Angel you might have a point! That’s when major issues started for me!

 

 

Sent from my iPhone using Tapatalk Pro

 

I dont know what is happening, I was playing without any problems before that patch.

 

Maybe ED has changed some system requirements to high?

 

If thats true, its so sad...:(

..:NAVY PILOTS ARE THE THE BEST PILOTS:..

Posted

have to a agree, more stutters in since the last OB patch :(

'controlling' the Ka50 feels like a discussion with the Autopilot and trim system about the flight direction.

Posted

It would be nice if some of the devs would com into this part of the forum and explain why performance is getting worse.

Seems that game optimations are of low priority - strange considering the amount of users struggling to get smooth game play.

| i7-10700K 3.8-5.1Ghz | 64GB RAM | RTX 4070 12GB | 1x1TB M.2. NVMe SSD | 1x2TB M.2. NVMe SSD | 2x2TB SATA SSD |  1x2TB HDD 7200 RPM | Win10 Home 64bit | Meta Quest 3 |

Posted
...

 

What is that software you are using to show cpu / gpu stuff?

Asus Prime X570-P * Ryzen 5800X3D + Scythe Fuma cooler * RTX 4080 Super * Corsair 64GB DDR4 3600MHz * Samsung 980 pro 2Tb + 1Tb nvme * Samsung 850 EVO 512Gb SSD * Corsair RM850x V2/2018 * HP Reverb G2 * CH Fighterstick/Pedals/Throttle * Win11 Pro

Posted
Not sure why brianjmac..? Something must be affecting it possibly....

 

Do you use this full line below in the file?

 

options.graphics.maxfps = 60

 

This is what my pc looks like CPU - GPU - FPS when locked.

 

No Overclock on GPU and only @ 4.8Ghz CPU (Not even pushing near max CPU/GPU to hold 60) That's the point tho right, so she has headroom and makes Track IR smoother.

 

Mission F/A-18 Interdiction

 

attachment.php?attachmentid=199462&stc=1&d=1544275308

 

I create the autoexec.cfg with that exact line and my in-game FPS shows it locked at 50.

i5 7600K @4.8GHz | 1080 Ti | 32GB 3200MHz | SSD | DCS SETTINGS | "COCKPIT"

Posted
What is that software you are using to show cpu / gpu stuff?

That lools like the OSD from MSI Afterburner, its a great tool.

You can decide what data you want to get displayed.

i3 8350k @4.9Ghz, DDR4 3200 16GB, Strix 1080, ADATA 512GB m.2, CX 550W, H115i

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...