mi 8 arc ud problem

[zoranin73]

I try everything but I can t get signal on arc-ud,watched all tutorial which I can find but nothing seems to work for me.On arc-ud panel I put on narrow,put preset chanell on r 828 radio,tune station and nothing,try hundred times??

[TwinkieAvenger]

I haven't tried this myself but the manual says on pg 117:

 

To use the R-828 radio in conjunction with the ARK-UD homing set to home on to a ground station, first establish voice contact with the station and request a tone modulated signal from the ground station operator for the desired frequency. Once the tone signal is confirmed in the headset, set the Р-828 СВЯЗЬ-КОМПАС" (R-828 VOICE-HOMING) mode switch to "КОМПАС" (HOMING). Observe the needle on the UGR-4UK directional gyro for signal bearing.

 

Perhaps you need to use the radio communications menu with the R-828 tuned and in "VOICE/СВЯЗЬ" mode to request enabling the homing beacon first?

[Looney]

Can confirm, tried setting up ARK-UD beacon 1 at 114.166 and couldn't get it to work in MP. Haven't tried SP though.

[unknown]

Works fine for me in SP(OB).

 

(should be 1440p after YT processing)

ARK-UD-Test.miz

Edited December 3, 2020 by unknown

[Looney]

I was too far away and on the ground I didn't get a signal. It works now, thanks.

[unknown]

I was too far away and on the ground I didn't get a signal. It works now, thanks.

 

:thumbup:

 

Line of sight is modeled for all radio equipment in DCS, if the transmitter is behind a hill and you're not high enough....nothing.

:beer: