Blinky.ben Posted January 30, 2021 Posted January 30, 2021 (edited) I can’t get the MK20’s to drop all the munitions onto the target area with CCRP/Auto. Don’t know what I’m doing wrong. I have tried with setting the SPI with the TGP or HUD but the submunitions always fall short for me. I am at 2000ft fly straight and level, I get all the release cues but they just always fall well short of the target as in none of them hit a single vehicle. It’s almost like it’s programmed so the submunitions don’t got past the SPI. I can get them to work with CCIP no problem not home to post a TRK so will do later EDIT: I accidently posted this in the wrong area. I have made a new post please delete this one. Thank you Edited February 26, 2021 by uboats
Blinky.ben Posted February 2, 2021 Author Posted February 2, 2021 I can't get the MK-20's to hit the target while in Auto/CCRP. I can dive and get the submunitions on target with CCIP but while in Auto they always fall short. Even if I drop 4x MK-20's with a interval of 200 or more they will always fall short. it's as if they are programmed so the last submunitions hits the SPI and not the First submunitions hitting the SPI then past it. I have attached a TRK showing all bomblets falling a very long distance short of the targets. I used a waypoint as my SPI for this example but it also happens no matter what I use to mark the SPI JF-17 MK20 Don't hit target.trk
uboats Posted February 2, 2021 Posted February 2, 2021 could you try hornet with mk-20? i checked mk-20 param, the default open height is 457, not quite sure the meaning of other params [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
Blinky.ben Posted February 2, 2021 Author Posted February 2, 2021 (edited) Yeah sure. Can't check today but I will have a go at it tomorrow. Unless someone else can do it before I can thanks Edited February 2, 2021 by Blinky.ben
dorianR666 Posted February 2, 2021 Posted February 2, 2021 Could be related perhaps: CPU: AMD Ryzen 5 1600X GPU: AMD RX 580
Blinky.ben Posted February 2, 2021 Author Posted February 2, 2021 24 minutes ago, dorianR666 said: Could be related perhaps: As a guess I wouldn’t think so due to the fact the submunitions are falling very short but they are being dispensed in a way that I would expect with a good spread on the ground. I think this is more that the bombs are being released too early but that’s just me having a guess to be the issue.
uboats Posted February 2, 2021 Posted February 2, 2021 [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
uboats Posted February 2, 2021 Posted February 2, 2021 try to release mk20 over 1000m agl [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
Blinky.ben Posted February 2, 2021 Author Posted February 2, 2021 I tested the MK-20's with the F-18 and they drop on target as planned. It's almost like the JF-17 is dropping the bombs too early so the submunitions stop before the SPI point. just a theory tho F-18 MK-20 test.trk
uboats Posted February 2, 2021 Posted February 2, 2021 tried jf17 using same miz no problem jf17 mk20.trk [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
Blinky.ben Posted February 2, 2021 Author Posted February 2, 2021 (edited) So it must be related to height. I did some playing around with it and it seems I wasn't allowing much time between dropping them and the point they open. I've got them working now thanks for your help. Edited February 2, 2021 by Blinky.ben
Floydii Posted February 3, 2021 Posted February 3, 2021 Interestingly, the Raz bam Harrier has a very similar issue with Mk20s.
Hodo Posted February 4, 2021 Posted February 4, 2021 I have found the clusters discharge at the SPI when used in CCRP. It is best to set it a little further than where you expect. Like if you are wanting to hit a line of 5 vehicles. Set the SPI near the front, I like the second or third vehicle. Make sure you are going between 450-600kts. I prefer 500+/- 20kts. From about 5-10kft agl. But honestly it is far more accurate to just use CCIP for mk20s.
Recommended Posts