Mi-24P R-828 Voice / Channels not working

[Caster]

When trying to use the R-828 I cannot get voice to work throught SRS (although it does with the R-863, and I'm setting the radio source between the two). It also does not work to communicate with AI in my flight. When connected via SRS I can see that when I change the channel knob, nothing happens.

 

I have done a full repair of DCS, and am using the latest (1.9.7.0) version of SRS

 

Track was multiplayer and 30MB so here's a drive link. I can try and make a smaller one if you need https://drive.google.com/file/d/1u25Wb18zpQG0QZKSQwWknIQXmmzet2Jt/view?usp=sharing

 

Logs.rar

Oh and I'm on the latest version of beta

[JohnW71]

After you change the channel you have to hold the AUT button to tune it in, it's tucked underneath the signal flares so hard to see.

[Caster]

Will give that a go right now, thanks!

[Caster]

Still not working for me. I set it up with default on CH0, Kobuleti on CH1, still wouldn't work after selecting the R-828 on the SPU, and holding the AUT button after changing channel

Couldn't contact flight on CH0, ATC on 1

[Ciribob]

SRS for the hind is only the first pass

The SRS keybinds in SRS are used for selecting the radio or intercom, and for the push to talk.

Frequencies and volumes are still set in cockpit though as usual

Check the overlay in SRS to see your selected radios and frequencies

Sent from my HD1903 using Tapatalk

[YoYo]

Direction works for me if I use R-828 (and arrow with number "2"), but no morse tone on any channel (but its present). Any idea?

 

Btw. if you check this both videos you can notice that they have the problem also:

 

 

 

Something is missing here?

Edited June 24, 2021 by YoYo