Deimos Posted October 27, 2021 Posted October 27, 2021 Hi, since the last update i can´t trim anymore. I hear the "trim-motors" (?) and i see my coolie hat moving on the stick (ingame) doing all my movements but nothing happens to the behavior of my Hind. Anyone else here ? AMD Ryzen 7 / 3800X 8-Core / Nvidia 4080Super / RAM: 64 GB 3440 x 1440 / trackIR 5 / hp reverb G2 VPC Mongoos T-50CM3 Throttle / vkb-Gladiator NXT premium Stick
Enduro14 Posted October 27, 2021 Posted October 27, 2021 Nope, works perfectly on my end. Do the usual drill run a repair and check for odd bindings. Intel 8700k @5ghz, 32gb ram, 1080ti, Rift S
Deimos Posted October 28, 2021 Author Posted October 28, 2021 no odd bindings here. i started from a new, blank key-setup for the Pilot. i hear the servos doing their work and (as told) i see my virtual coolie hat doing all my movements correctly..... Trim has still NO effect. AMD Ryzen 7 / 3800X 8-Core / Nvidia 4080Super / RAM: 64 GB 3440 x 1440 / trackIR 5 / hp reverb G2 VPC Mongoos T-50CM3 Throttle / vkb-Gladiator NXT premium Stick
Quati Posted October 28, 2021 Posted October 28, 2021 Did you check the Control Helper at the Mi-24 Special Settings Tab?
Deimos Posted October 28, 2021 Author Posted October 28, 2021 Control helper ? uummm...no AMD Ryzen 7 / 3800X 8-Core / Nvidia 4080Super / RAM: 64 GB 3440 x 1440 / trackIR 5 / hp reverb G2 VPC Mongoos T-50CM3 Throttle / vkb-Gladiator NXT premium Stick
Enduro14 Posted October 28, 2021 Posted October 28, 2021 No clue how else to trouble shoot, it works very good for me. Assume you don't have it mapped to a axis but a 4 way hat type thing? I use hotas Warthog all good here Intel 8700k @5ghz, 32gb ram, 1080ti, Rift S
SnuggleFairy Posted October 29, 2021 Posted October 29, 2021 Make a short track of you trimming and post it here
Flia Posted October 29, 2021 Posted October 29, 2021 Trim working fine in my Hind PC: i7 9700K, 32 GB RAM, RTX 2080 SUPER, Tir 5, Hotas Warthog Throttle, VPC MongoosT-50CM2 Base with VPC MongoosT-50CM2 Grip, VKB-SIM T-RUDDER PEDALS MK.IV. Modules : NEVADA, F-5E, M-2000C, BF-109K4, A-10C, FC3, P-51D, MIG-21BIS, MI-8MTV2, F-86F, FW-190D9, UH-1H, L-39, MIG-15BIS, AJS37, SPITFIRE-MKIX, AV8BNA, PERSIAN GULF, F/A-18C HORNET, YAK-52, KA-50, F-14,SA342, C-101, F-16, JF-17, Supercarrier,I-16,MIG-19P, P-47D,A-10C_II
Solution Deimos Posted October 30, 2021 Author Solution Posted October 30, 2021 Thanks all. i 've found the problem. its me . the trim movements are so slow now , that did'nt notice them. LOL 1 AMD Ryzen 7 / 3800X 8-Core / Nvidia 4080Super / RAM: 64 GB 3440 x 1440 / trackIR 5 / hp reverb G2 VPC Mongoos T-50CM3 Throttle / vkb-Gladiator NXT premium Stick
TOViper Posted March 14, 2022 Posted March 14, 2022 (edited) Guys, a quick question for you: Trim on the pilot seat (rearward) works pretty fine on my rig (using commands "Trim hat - NOSE UP/DOWN/LEFT/RIGHT" for the Mi-24P Pilot section. But I can't get the trim work for the gunners seat (forward). I find no way to get it working: - I have set commands "Trim hat - NOSE UP/DOWN/LEFT/RIGHT" for the Mi-24P Copilot-Gunner section to one of my coolie hats . - I have used aircraft control priority settings for "Pilot", "Gunner" and "Equally Responsible" Both settings together and independetly, but with no luck Edited March 14, 2022 by TOViper Visit https://www.viggen.training ...Viggen... what more can you ask for? my computer: AMD Ryzen 5600G 4.4 GHz | NVIDIA RTX 3080 10GB | 32 GB 3.2 GHz DDR4 DUAL | SSD 980 256 GB SYS + SSD 2TB DCS | TM Warthog Stick + Throttle + TRP | Rift CV1
fargo007 Posted March 15, 2022 Posted March 15, 2022 2 hours ago, TOViper said: Guys, a quick question for you: Trim on the pilot seat (rearward) works pretty fine on my rig (using commands "Trim hat - NOSE UP/DOWN/LEFT/RIGHT" for the Mi-24P Pilot section. But I can't get the trim work for the gunners seat (forward). I find no way to get it working: - I have set commands "Trim hat - NOSE UP/DOWN/LEFT/RIGHT" for the Mi-24P Copilot-Gunner section to one of my coolie hats . - I have used aircraft control priority settings for "Pilot", "Gunner" and "Equally Responsible" Both settings together and independetly, but with no luck I believe that's an already reported issue. Have fun. Don't suck. Kill bad guys. https://discord.gg/blacksharkden/
Pixel of Life Posted March 15, 2022 Posted March 15, 2022 (edited) I also started having this issue today when I switched from stable to open beta, but for me, it doesn't work in the pilot's seat. The hat on the cyclic stick moves, the indicators on the on screen trim overlay also move, and I can hear the motors running, but it doesn't actually do anything. The stick just returns to the center position no matter how much I mess with the trim. EDIT: Nevermind, I had force feedback turned on in the options. It's working now. Edited March 15, 2022 by Pixel of Life
Recommended Posts