104th_Money Posted January 6, 2022 Posted January 6, 2022 After last update, when I punch in tacan number for tanker and switch to A/A TR, the HSI will only show direction and not distance anymore. Tried switching from Norm to Nav and back, but no luck. Anything change for this? Intel i9-13900k, Asus Z790-E Gaming Wi-fi 2 motherboard, 64gb Corsair Vengeance LPX DDR5-6400 RGB ram 2x32gb XMP2 profile, 4TB Crucial T700 PCIE 5.0 SSD internal, 2TB Crucial T700 PCIE 5.0 SSD internal, Asus ROG Strix OC GeForce RTX 4090, Corsair 7000X Case with 5 x 120mm side mounted intake fans and 3 x 140mm top mounted exhaust fans, 1 x 140mm rear mounted exhaust fans, front mounted Corsair H150i Elite Capellix 360mm liquid cooler w/Elite LCD with 6 x 120mm fans in 3 push, 3 pull intake configuration, 1 x 32" Samsung 3840x2160 display, 1x 32" Asus 2560x1440 display, TrackIR5 w/pro clip, Thrustmaster Warthog stick and throttle, CH Fighterstick Pro and Pebble Beach Velocity pedals.
Frederf Posted January 6, 2022 Posted January 6, 2022 All the tankers behave like ground based TACAN now. It's affecting all planes.
Rongor Posted January 7, 2022 Posted January 7, 2022 16 hours ago, 104th_Money said: After last update, when I punch in tacan number for tanker and switch to A/A TR, the HSI will only show direction and not distance anymore. Maybe I missed something but isn't that accurate and also working like this since the release of the A-10C 10 years or so ago? 15 hours ago, Frederf said: All the tankers behave like ground based TACAN now. It's affecting all planes. exactly, isn't that working incorrectly? Should give only bearings...
Invisibull Posted January 8, 2022 Posted January 8, 2022 On 1/7/2022 at 6:11 AM, Rongor said: Maybe I missed something but isn't that accurate and also working like this since the release of the A-10C 10 years or so ago? exactly, isn't that working incorrectly? Should give only bearings... "A/A T/R. TACAN operates in Air-to-Air transceiver mode and provides bearing, range, deviation, and station identification with a TACAN-equipped aircraft." i9 9900k - GTX 2080 Ti - MSI Z87 GD65 Mobo - 64GB HyperX Predator RGB DDR4 3200MHz - Win10 64 bit - TM Warthog w FSSB R3 mod - TrackIr 5.
Rongor Posted January 8, 2022 Posted January 8, 2022 See, this is what I grew up with in the A-10C a decade ago. Apparently this has changed meanwhile and tankers are now providing range. Good.
Dragon1-1 Posted January 8, 2022 Posted January 8, 2022 This is a sim-wide issue, AA TACAN ranging is bugged. I hope this gets fixed this month. IRL, AA TACAN provides only the range, except when it comes to tankers, which have a full set of antennas onboard. 1
Frederf Posted January 9, 2022 Posted January 9, 2022 KC-135, as modeled in DCS, is a full service airborne TACAN providing both bearing and range. There are such airplanes in real life, usually large ones because bearing equipment is large. Every airplane with TACAN equipment can provide distance service but it requires two-way communication. Bearing-only is when a full service station is not achieving two-way communication. Right now all DCS tanker TACANs are behaving like ground stations. If you set tanker to 1X and tune 1X in your airplane like it's a ground station you'll get normal service. If you tune in like it's an air station you'll get partial service. That's because when you're in not-the-right mode relative to the station you sometimes get some bleed over because the different modes and bands and pulse codes aren't 100% independent of each other. The fact that you get partial service when not fully configured to match with the station type causes a lot of confusion. 1
Recommended Posts