lefuneste01 Posted August 28, 2022 Posted August 28, 2022 On 8/27/2022 at 6:14 PM, Scaley said: HOWEVER... if you only do that edit then every time the autopilot modes are switched off (either attitude or altitude) the master caution tone plays on a continuous loop and can't be cancelled. To fix that you need to comment out the master_caution line (see screenshot). Even more interestingly, when you do so the master caution tone still plays when the master caution light comes on, but no longer loops until cancelled. Thanks, I was wondering about this sound, without doing the link with the suppression of the SAS sound ! Just tried to find without success in different MFD screens what was creating the warning in the AH64... Intel i5 10400K @4.8 GHz, 3080ti, 32 GB RAM, Varjo Areo. I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste
Solution NeedzWD40 Posted August 28, 2022 Solution Posted August 28, 2022 On 8/27/2022 at 11:14 AM, Scaley said: So done a bit more testing with this... Commenting out the line suggested by lefunete01 above does indeed get rid of the annoying long SAS saturation tone. Interestingly it replaces it with the (as I understand it) correct "short" tone, but only when the SAS is actually saturated, so it only plays in sync with the EUFD messages. All the erroneous warnings are removed. HOWEVER... if you only do that edit then every time the autopilot modes are switched off (either attitude or altitude) the master caution tone plays on a continuous loop and can't be cancelled. To fix that you need to comment out the master_caution line (see screenshot). Even more interestingly, when you do so the master caution tone still plays when the master caution light comes on, but no longer loops until cancelled. null I just found out you can simply change "Tones/flt-ctrl" to "" on the 5th tone line and you don't even have to comment out any other lines. 1
pii Posted September 1, 2022 Posted September 1, 2022 On 8/25/2022 at 4:35 AM, normanleto said: I fly rather okay, but since about a week I have annoying sound of SAS SATURATION message too often to stand the game. It appears very often except perhaps straight flying. Even small adjustment of throttle causes it. Tried to turn off various channels in A/C utils page, but to no avail. I see a green bar of throttle input slowly creeping up or down the limits (on the controls preview). I have deadzones set to about 3 in each axis. Stick is saitek X56. Anyone else has this problem? It is very annoying during the hover attempts or during the combat. No way to turn the sound off. Perhaps there is a way to change a sound file to avoid hearing it every several seconds? yeah since the last patch the SAS SATURATION goes off a lot more than before the patch. Give it time they will fix it sooner or later. I have a strange bug on my system where if my USB headphones are plugged in (not being used but plugged in) those little SAS sound disappear! lol On 8/25/2022 at 4:35 AM, normanleto said: I fly rather okay, but since about a week I have annoying sound of SAS SATURATION message too often to stand the game. It appears very often except perhaps straight flying. Even small adjustment of throttle causes it. Tried to turn off various channels in A/C utils page, but to no avail. I see a green bar of throttle input slowly creeping up or down the limits (on the controls preview). I have deadzones set to about 3 in each axis. Stick is saitek X56. Anyone else has this problem? It is very annoying during the hover attempts or during the combat. No way to turn the sound off. Perhaps there is a way to change a sound file to avoid hearing it every several seconds? yeah since the last patch the SAS SATURATION goes off a lot more than before the patch. Give it time they will fix it sooner or later. I have a strange bug on my system where if my USB headphones are plugged in (not being used but plugged in) those little SAS sound disappear! lol
Zarma Posted September 2, 2022 Posted September 2, 2022 No change in today's patch. i9 9900k, 64 Go RAM, RTX 4090, Warthog HOTAS Throttle & Stick, Virpil AH64 collective, TPR rudder, MFD Cougar, Trackir 5 Pro, Multipurpose UFC, Alain Dufour's TEDAC and Oculus Rift S (when I want some VR), http://www.twitch.tv/zarma4074 / https://www.youtube.com/user/Zarma4074
Lazerhawk Posted September 21, 2022 Posted September 21, 2022 (edited) Has this been addressed in today's OB patch? I couldn't find anything related in the change log. Edited September 21, 2022 by Lazerhawk
corbu1 Posted September 21, 2022 Posted September 21, 2022 I have the new patch installed and did a 45 minute flight go some first impressions. I didn‘t get any saturation sounds and warning displays in the UEFD wether in hold modes or not. In the last two patch versions I got messages even not in hold modes nearly each minute in flight. 2 DCS Version: 2.9.15.9408 Modules: UH-1H - SA342 - KA-50 BS3 - MI-24P - MI-8MTV2 - AH-64D - CH-47F - OH-58D - UH-60L(Mod, n.i.) - OH-6A(Mod, n.i.) - A-10CII - F-16C - F/A-18C - AJS37 - F-14 - MiG-21bis - JF-17 - Mirage F1 - MiG-29A - (prepurchase) - FC2024 -Combined Arms - Supercarrier - NTTR - Normandy2.0 - Channel - Persian Gulf - Syria - SA - Sinai - Afghanistan - Kola - Iraq - Cold War Germany — Waiting for: BO-105 - AH-1G/F(Mod) DCS-Client: 9800X3D, 64GB 6200, RTX3090, 1TB M2 NVMe(win10), 4TB M2 NVMe(DCS), VR VivePro2, PointCTRL, VaicomPro, Wacom Intuos S with VRK v2Beta DCS-DServer: 11600KF, 64GB 3600, GTX1080, 1TB M2 NVMe(win10), 2TB M2 NVMe(DCSDServer), DCS Olympus Simpit: NLR Flightsim Pro Cyclic: TM Warthog Grip with 30cm Extension + VPforce Rhino FFB FW Stick: TM Warthog Grip and Base, Throttle: TM Warthog Pedals: Komodo Sim. with Dampers Collective: VPC Rotorplus+AH-64D Grip Other: NLR HF8, Buttkicker (3*MiniConcert), TotalControls AH64D MPD‘s and EUFD, Alain Dufour’s AH-64 TEDAC, TM MFD, Streamdecks (1*32,3*15,1*6), VPC CP#1
NeedzWD40 Posted September 21, 2022 Posted September 21, 2022 (edited) 5 hours ago, Lazerhawk said: Has this been addressed in today's OB patch? I couldn't find anything related in the change log. Sort of. It's not as aggressive as it used to be, but it's still there. The collective SAS channel is still not quite where it needs to be, so I'm still killing it on startup. This results in the message and tone fairly regularly. Edited September 21, 2022 by NeedzWD40 1
Recommended Posts