MT Crash on Launch

[Reslox]

DCS crashes on launch (MT version only), tried Cleaning up, slow repair, removing all shaders and mods alongside renaming the DCS saved game folder. Uploading MT log,SC log and dxdiag

dcs.log DxDiag.txt dcs_non_MT.log

[Reslox]

Was able to avoid the crash by going into the BIOS and changing the amount of active cores to 1 instead of all. uploading the Logs files I was able to get from it. Changing back to the default amount causes the crash again. All of this was done after renaming the SavedGames/DCS folder, Running a cleanup and a slow repair.

DCS single E-core.log dcs-MT.log dcs-nonMT.log DxDiag.txt

Edited March 11, 2023 by Reslox

[Reslox]

@FlappieAny help here? I tried Updating windows/drivers/BIOS and no joy, If I temper with the BIOS or with MS config and change the amount of cores to 1 it is able to get past the  crash, anything else doe sn't make it in.

dcs.log dcs-MSCONFIGEDITS.log

[addman]

My MT-exe also crashes on startup. I see in your DXdiag you have an i3 I think it's the CPU I also have a dual core CPU with HT, Pentium G7400.

[Flappie]

Hi. Can you please make sure that Hyperthreading is enabled in your PC BIOS?

@Reslox @addman

Also, please check this:

 

[addman]

10 minutes ago, Flappie said:

Hi. Can you please make sure that Hyperthreading is enabled in your PC BIOS?

@Reslox @addman

Also, please check this:

 

HT is enabled and that setting in msconfig was already unchecked so, no luck.

[Reslox]

7 hours ago, Flappie said:

Hi. Can you please make sure that Hyperthreading is enabled in your PC BIOS?

@Reslox @addman

Also, please check this:

 

I tested it with both Hyperthreading on and off and it didn't make a difference, also tried making sure no processors were limited by msconfig. The only attempts so far that have been able to bypass the crash are to disable 1 of the cores (Dual-core CPU). As soon as both of the cores are active the crash starts happening. (Tried with 1 core 1 and 2 threads, 2 cores 3 and 4 threads).

[Mike Wazowsky]

dcs.log

[wrightbros]

My MT using VR crashing as well , and it happens right before a mission or map is loading.  The screen goes black and log Tool pops up . 

[Qcumber]

59 minutes ago, wrightbros said:

My MT using VR crashing as well , and it happens right before a mission or map is loading.  The screen goes black and log Tool pops up . 

I was having the same issue until tonight I discovered that enabling MSAA stops it. As per a suggestion from @BIGNEWY in another thread. If MSAA is off the missions crash in the load screen. MSAA at x2 and the missions load. 

[BIGNEWY]

28 minutes ago, Qcumber said:

I was having the same issue until tonight I discovered that enabling MSAA stops it. As per a suggestion from @BIGNEWY in another thread. If MSAA is off the missions crash in the load screen. MSAA at x2 and the missions load. 

Now you have enabled it, try disabling it again and see if you still get the crash 

[Qcumber]

8 hours ago, BIGNEWY said:

Now you have enabled it, try disabling it again and see if you still get the crash 

When I disable MSAA it crashes. I'll do some more testing later. 

[wrightbros]

On 4/17/2023 at 3:59 PM, Qcumber said:

I was having the same issue until tonight I discovered that enabling MSAA stops it. As per a suggestion from @BIGNEWY in another thread. If MSAA is off the missions crash in the load screen. MSAA at x2 and the missions load. 

You’re right, I enabled  MSAA X2 but it kept crashing so I up the scale to MSAA X4 and it worked.  I I tested it a few times just incase and it works. Thank you