Jump to content

Bug in campaign Operation Reforger 2 Mission 2


Wizard1393

Recommended Posts

So I just had a go at this mission. I got moved to CAP station south, went 10 or so passed between the new WPT2 and WPT3, then I got "final MiG splashed" and got vectored to tanker. But it seemed like the tanker was already on its way back to Incirlik because I was barely closing in on him at all. Steered to home plate instead and when passing overhead the base, Jester told me to switch air source and extend the probe. I ignored this and landed normally on the base. The tanker was already there in it's spot. I got mission failed since something must have gotten borked.

GPU: PALIT NVIDIA RTX 3080 10GB | CPU: Intel Core i7-9700K 4,9GHz | RAM: 64GB DDR4 3000MHz
VR: HP Reverb G2 | HOTAS: TM Warthog Throttle and Stick
OS: Windows 10 22H2

Link to comment
Share on other sites

So I just had a go at this mission. I got moved to CAP station south, went 10 or so passed between the new WPT2 and WPT3, then I got "final MiG splashed" and got vectored to tanker. But it seemed like the tanker was already on its way back to Incirlik because I was barely closing in on him at all. Steered to home plate instead and when passing overhead the base, Jester told me to switch air source and extend the probe. I ignored this and landed normally on the base. The tanker was already there in it's spot. I got mission failed since something must have gotten borked.
Yep, me too. Exactly the same. He says to fly to WP1 so I'm guessing we had to go there from Incirlk after overflying the tanker, then we would've been told to land, etc.

Sent from my SM-G960U using Tapatalk

Link to comment
Share on other sites

You need to rejoin and separate from the tanker again, however it seems instead of switching his orbit, the tanker just goes rtb now. I'll fix it with a second spawning tanker and I'll also fix the mig issue. Thank you!

Heatblur Simulations

 

Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage.

 

http://www.heatblur.com/

 

https://www.facebook.com/heatblur/

Link to comment
Share on other sites

I have the same issue with tanker RTB by the time I reach WP3 to call for rejoin. Also, in first and second mission after I land and F2 to check out other planes, every single F-14 that went to hangar had it's wings fully spread and exploded at hangar entrance. In the first mission when I land and taxi to parking at the end of the runway everything is destroyed and burning

F-14, A-10CII, F/A-18, Spitfire, FC3, Supercarrier and all of the maps/terrains 

R7 5800X, 32GB DDR4 3733GHz CL14, RTX3090, Sound blaster Z, Oculus Quest 2 and Reverb G2, WINWING F/A-18 Orion HOTAS...

Link to comment
Share on other sites

  • 1 month later...

It’s June 2. First try on Reforger 2 Mission 2. Pretty much all the triggers are messed up. I burned virtual holes in the sky for at least an hour at south cap. Never saw a mig. Finally I hear mig splashed go to the tanker. I get a tanker tacan but he’s not up on radio and I see he is rtb   Glad the Tom has long legs! But jeez, what a disappointment on what promises to be an epic mission. 
 

total boredom. I wonder if multithread could be to blame?

  • Like 2
Link to comment
Share on other sites

4 hours ago, Stain said:

I wonder if multithread could be to blame?

No, just usual after update AI problems and a mission susceptible to it.

🖥️ Win10  i7-10700KF  32GB  RTX3060   🥽 Rift S   🕹️ T16000M  TWCS  TFRP   ✈️ FC3  F-14A/B  F-15E   ⚙️ CA   🚢 SC   🌐 NTTR  PG  Syria

Link to comment
Share on other sites

On 6/2/2023 at 1:39 AM, Stain said:

It’s June 2. First try on Reforger 2 Mission 2. Pretty much all the triggers are messed up. I burned virtual holes in the sky for at least an hour at south cap. Never saw a mig. Finally I hear mig splashed go to the tanker. I get a tanker tacan but he’s not up on radio and I see he is rtb   Glad the Tom has long legs! But jeez, what a disappointment on what promises to be an epic mission. 
 

total boredom. I wonder if multithread could be to blame?

Yep. Me too. The same here.

It´s been 45 days form the first report and so far nothing.

Frustrating. 😕  


Edited by Conrado
  • Like 1
Link to comment
Share on other sites

1 hour ago, Conrado said:

Any progress in today´s update?

Nope, files were not updated.

🖥️ Win10  i7-10700KF  32GB  RTX3060   🥽 Rift S   🕹️ T16000M  TWCS  TFRP   ✈️ FC3  F-14A/B  F-15E   ⚙️ CA   🚢 SC   🌐 NTTR  PG  Syria

Link to comment
Share on other sites

16 minutes ago, Conrado said:

Yes. I´ve just tried it again, after the update. All the same.

Very sad. It should be one of the best Tomcat campaigns but it is totally bugged. And no updates in almost two months...

😕

 

My apologies for that, I have been bogged down with lots of other stuff since April, but will focus solely on fixing reforger II come end of the month. Thank you all for your very kind patience.

  • Like 1

Heatblur Simulations

 

Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage.

 

http://www.heatblur.com/

 

https://www.facebook.com/heatblur/

Link to comment
Share on other sites

Thank you for your feedback. It's very important for us to know these issues are being taken care of.

We are loking foward to playing it and I'm sure this is going to be a great Tomcat campaign, if not the best.

Best wishes. 

Link to comment
Share on other sites

Hello all ,
No luck to get the mission2 successful for no apparent reason.
Followed everything to the letter, I was able to find the Migs 3 times and kill them but every time I want to rejoin the tanker he drags me to the base he actually lands leaving me and bunch of AI F-14s circling until jester calls RTB vector me to 20k WP1, there is some pep talk about how important the mission was , all good all fine however even when I reached WP1 @ 20K and I call “inbound for landing” there is no answer. I then I landed on my own but ofc mission is failure. In one of the runs I called AWACS to vector me to Tanker with replay " No Tanker Available" both this attempts where made by vectoring on TACAN after the MIG kills  then I decided to use the WP3 that Jester created however that took a long route put me very far from the tanker which is RTB for unknown reason , I barely made it back to base , landed FAILURE .
Another BUG , JESTER calls he will shoot the missile once the 29's are identified and engaged however he never fire’s the missile leading me into ACM using AIM9s .He also says he’ll set TACAN to 33Y for tanker however when I check I see 21 on the dial.  I play on latest BETA release and far as I can see this issue is not fixed with latest beta.


Edited by DarkOmenX

Turn'n'Burn..Baby! :joystick:

Link to comment
Share on other sites

9 hours ago, DarkOmenX said:

He also says he’ll set TACAN to 33Y for tanker however when I check I see 21 on the dial.

Did you check Jester's dial or yours - in pilot cockpit? These can be set differently and only the one is active atm depending on the RIO setting here:

https://www.heatblur.se/F-14Manual/cockpit.html#communication-tacan-command-panel

AWACS replies with "no tanker available" because it was already RTB.

DCS ATC might be turned off in the mission to not interfere with the scripted one, so you won't get reply to "inbound" call.

Generally you're wasting your time in the campaign missions because they are broken atm, which is reported in this very thread.

  • Like 1

🖥️ Win10  i7-10700KF  32GB  RTX3060   🥽 Rift S   🕹️ T16000M  TWCS  TFRP   ✈️ FC3  F-14A/B  F-15E   ⚙️ CA   🚢 SC   🌐 NTTR  PG  Syria

Link to comment
Share on other sites

3 hours ago, draconus said:

Did you check Jester's dial or yours - in pilot cockpit? These can be set differently and only the one is active atm depending on the RIO setting here:

https://www.heatblur.se/F-14Manual/cockpit.html#communication-tacan-command-panel

AWACS replies with "no tanker available" because it was already RTB.

DCS ATC might be turned off in the mission to not interfere with the scripted one, so you won't get reply to "inbound" call.

Generally you're wasting your time in the campaign missions because they are broken atm, which is reported in this very thread.

To be fair and honest I didn't check the back seat but makes sense he actually set it on his panel, I checked only mine however totally disregarded the thought that what Jester sets on his panel is not reflected on my TACAN panel. I'll try with DCS ATC off and see if that will help to identify the mission complete once landed. Thanks!

Turn'n'Burn..Baby! :joystick:

Link to comment
Share on other sites

5 minutes ago, DarkOmenX said:

I'll try with DCS ATC off and see if that will help to identify the mission complete once landed.

If ATC is off, it is a setting in the mission itself, not global DCS setting. The mission will not be completed afaik - please, wait for a fix.

🖥️ Win10  i7-10700KF  32GB  RTX3060   🥽 Rift S   🕹️ T16000M  TWCS  TFRP   ✈️ FC3  F-14A/B  F-15E   ⚙️ CA   🚢 SC   🌐 NTTR  PG  Syria

Link to comment
Share on other sites

  • 2 weeks later...

I am waiting for a fix too. I should have read this thread before wasting 2 hours of my life.

PC Hardware: i9-12900k, RTX 3080 10GB, 32GB DDR5 4400MHz, NVME.2 Drives, Alienware 38" 3840x1600 144MHz Monitor, TrackIR Pro Clip, Pimax Crystal

Flight Controls: Winwing Orion 1 FA-18 Stick and Throttle HOTAS / Logitech Rudder Pedals

DCS Modules: Too many to list after the 15 year sale

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...