Quick Help Needed

[TinyDancer]

Well my Orion 2 Max order came in today, seven days from placing the order in case anyone else wondering about time frame.

I got the throttle put together and installed onto my desk mount. I've got the stick 99% put together. My issue is I seem to missing the set screw referenced on page seven.

https://wwsimstore.com/static/assets/files/en/JOYSTICK GRIP OF F-16 H.O.T.A.S-User MANUAL EN V 1.0.pdf

There is no way I am going to bother asking WinWing to send a set screw from China to California. Does anyone know the pitch and length I need?

[speed-of-heat]

You could ask winwing, if none here responds...

[MAXsenna]

To not ask WW is your prerogative, while back in the days (90s), TM would always send me new springs over the pond while they were still TM.
Always considered myself a customer for life, alas.

Sent from my MAR-LX1A using Tapatalk

[BuzzU]

I'd ask WW for size. All you really need is the thread pitch. It will be metric. You can measure the length. Try a hardware store.

[AlpineGTA]

Are you saying you have the short screw but you don't have the long one? I measured the length of both; the short one is 1" long and the long one is 1 3/8" long. Or approx. 25mm & 35mm. I don't know the diameter and pitch though, sorry. If you have the short one you could take it to a hardware store, as the previous poster said, and match it. They usually have a gauge of threaded holes along the shelf in the nuts & bolts section where you can try your screw to find the correct pitch. You just need to find one 1 3/8" long.

[TinyDancer]

Thanks guys. Turns out the mounting screws that came with my base plates actually thread into the locking collar, so I'll be able to get it buttoned up tomorrow.